Skip to content

Indian Rock Suites

CSIR NET Earth Sciences Part C geology: Deccan Traps, anorthosites, carbonatites, charnockites, kimberlites, ophiolites and granitoids of India.

  • 20 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: A Tombstone in Kolkata
  3. Overview Map of the Suites
  4. Deccan Traps
  5. Anorthosites
  6. Carbonatites
  7. Charnockites
  8. Kimberlites and Lamproites
  9. Ophiolites
  10. Granitoids
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: A Tombstone in Kolkata

Overview Map of the Suites

SuiteTectonic settingIndian examplesAge (approximate)
Deccan Trapscontinental flood basalt over a mantle plumeWestern Ghats, Malwa plateau, Saurashtra, Kutch, Mandla lobelatest Cretaceous to earliest Palaeogene, about 66 Ma
AnorthositesArchaean layered complexes; Proterozoic massifsSittampundi (Tamil Nadu); Eastern Ghats massifs such as Chilka Lake and BolangirArchaean; Proterozoic
Carbonatitescontinental rifts, plume marginsAmba Dongar (Gujarat); Sung Valley and Samchampi (Shillong plateau, Mikir Hills); Sevathur and Samalpatti (Tamil Nadu); Newania (Rajasthan)Cretaceous–Palaeogene; Cretaceous; Proterozoic
Charnockitesgranulite terrainsSt Thomas Mount (Chennai), Nilgiri, Biligirirangan and Palni hills, Kerala Khondalite Belt, Eastern GhatsNeoarchaean to Neoproterozoic–Cambrian
Kimberlites and lamproitesstable cratonsWajrakarur and Narayanpet fields (Dharwar craton); Majhgawan (Panna, Madhya Pradesh)mostly Mesoproterozoic
OphiolitesNeo-Tethyan oceanic lithosphereNidar and Spontang (Ladakh); Naga Hills–Manipur; Andaman IslandsJurassic–Cretaceous
GranitoidsArchaean crust building to Himalayan collisionPeninsular Gneiss (TTG), Closepet granite, Bundelkhand and Singhbhum granites, Malani suite, Ladakh batholith, Himalayan leucogranitesArchaean to Miocene

Deccan Traps

Facts to know

  • Extent: present outcrop roughly half a million square kilometres across western and central India; the original extent was much larger before erosion and rifting.
  • Thickness: greatest in the Western Ghats, where the composite stratigraphic section exceeds a kilometre and approaches two; it thins eastward.
  • Age: the bulk erupted within about a million years around the Cretaceous–Palaeogene boundary (about 66 Ma), mostly within one reversed-polarity magnetic chron (29r).
  • Rocks: dominantly tholeiitic basalt in subhorizontal flows (hence “trap”, from the Swedish for stairs: the stepped landscape). Most flows are evolved (moderate Mg#), so the magmas fractionated in crustal reservoirs before eruption. Picritic basalts occur low in some sections; alkaline rocks, lamprophyres and carbonatites occur on the north-western margin (Kutch, Saurashtra, the Narmada region, Amba Dongar, and alkaline complexes in Rajasthan such as Mundwara and Sarnu–Dandali).
  • Flow types: compound pahoehoe flows (many small lobes) dominate the lower formations; thick “simple” sheet flows dominate the upper formations.
  • Between flows: red boles (weathered flow tops or thin soils, reddened by Fe oxidation); intertrappean beds of lake and river sediment with fossils (plants, ostracods, fish); beneath the lava pile in central India, the infratrappean Lameta Formation with dinosaur bones and eggs.
  • Dykes: major swarms along the Narmada–Satpura–Tapi rift zone and parallel to the west coast; these are feeders.
  • Weathering products: laterite and bauxite caps on the plateau; black cotton soil (regur).

Western Ghats stratigraphy

The Western Ghats sequence is divided by chemistry and isotopes (not visible lithology) into three subgroups:

SubgroupFormations (bottom to top)Notes
KalsubaiJawhar, Igatpuri, Neral, Thakurvadi, Bhimashankarlowest; includes picritic flows; compound pahoehoe common
LonavalaKhandala, BusheBushe: strongly crustally contaminated (high \( ^{87}\)Sr/\( ^{86}\)Sr)
WaiPoladpur, Ambenali, Mahabaleshwar, Panhala, DesurAmbenali: least contaminated, closest to the plume-derived composition; Mahabaleshwar shows a different, lithospheric contribution

The formation chemistry is mapped using elements such as Ba, Sr, Ti and isotopes. Variation in \( ^{87}\)Sr/\( ^{86}\)Sr between formations is a textbook example of assimilation of continental crust by a plume-derived magma (see the mixing and AFC section of the magma genesis page).

Origin and significance

  • Réunion plume: the Deccan is the starting plume head of the hotspot whose tail built the Chagos–Laccadive ridge and Réunion. Rifting between India and the Seychelles accompanied the eruption.
  • K–Pg extinction: the eruption overlapped the Chicxulub impact. Huge releases of SO\(_2\) and CO\(_2\) from the traps are debated as a co-cause of the end-Cretaceous mass extinction.
  • Comparison: the Rajmahal Traps (eastern India) are older, Early Cretaceous, associated with the Kerguelen plume and the Sylhet traps.

Anorthosites

Anorthosite is a plutonic rock with more than 90% plagioclase. Its existence is a puzzle: no ordinary mantle melt is that rich in plagioclase, so anorthosites must be cumulates or plagioclase-crystal mushes.

TypePlagioclaseAssociated rocksSettingIndian example
Archaean (layered, megacrystic)very calcic (bytownite–anorthite), equant megacrystslayered gabbros, ultramafics, chromitite layersArchaean greenstone and gneiss terrainsSittampundi complex (Tamil Nadu)
Proterozoic massif-typeintermediate (andesine–labradorite)mangerite, charnockite, rapakivi granite (the AMCG suite); Fe–Ti oxide ores; high-Al orthopyroxene megacrystsProterozoic orogenic and anorogenic beltsEastern Ghats massifs (Chilka Lake, Bolangir)
Layered intrusion anorthositesvariablein big mafic layered intrusionsintracratonic(Bushveld and Stillwater abroad)
Lunar highland anorthositevery calcicprimary crustlunar magma ocean, plagioclase flotationApollo samples (not Indian)

Petrogenesis of massif anorthosites (common model):

  1. Mantle-derived basaltic magma ponds at the base of thick crust.
  2. Mafic minerals crystallise and sink; plagioclase, less dense than the Fe-rich residual magma at those pressures, floats or accumulates as a mush.
  3. The buoyant plagioclase mush rises diapirically into the mid-crust.
  4. High-Al orthopyroxene megacrysts record the deep, high-pressure crystallisation stage.
graph TD
    A[Mantle-derived basalt ponds at crust-mantle boundary] --> B[Olivine and pyroxene crystallise and sink]
    B --> C[Plagioclase accumulates as buoyant mush]
    C --> D[Diapiric ascent of plagioclase mush]
    D --> E[Massif anorthosite in mid-crust]
    A --> F[Heat melts lower crust]
    F --> G[Mangerite, charnockite, granite: AMCG suite]

Carbonatites

Carbonatite (IUGS): an igneous rock with more than 50% modal primary carbonate.

VarietyMain carbonateNotes
Calciocarbonatitecalcitecoarse = sövite; fine, hypabyssal = alvikite
Magnesiocarbonatitedolomitebeforsite (dolomite carbonatite)
FerrocarbonatiteFe-rich carbonates (ankerite, siderite)often REE-rich, late stages
NatrocarbonatiteNa–K–Ca carbonatesknown erupting only at Ol Doinyo Lengai (Tanzania); low-temperature, black lava turning white on weathering

Associated rocks: ijolite, melteigite, nepheline syenite, pyroxenite, melilitite (silica-undersaturated alkaline rocks), forming ring complexes. Country rocks around them are altered by alkali metasomatism (fenitisation: K–Na feldspar, sodic pyroxene and amphibole replace the host).

Geochemistry and economics: highest concentrations of Sr, Ba, light REE, Nb (pyrochlore), P (apatite) and F of any igneous rocks; very low SiO\(_2\). Carbonatites host the world’s main REE and Nb deposits. Amba Dongar is known for fluorite.

Origin (three hypotheses, not exclusive):

  1. Primary low-degree melts of carbonated peridotite at high pressure.
  2. Liquid immiscibility from CO\(_2\)-rich nephelinitic or melilititic magma.
  3. Residual liquids after extreme fractional crystallisation of a carbonated alkaline silicate magma.

Indian carbonatites:

RegionComplexesContext
Western IndiaAmba Dongar (Gujarat); alkaline complexes of Rajasthanlate-stage Deccan magmatism
North-eastern IndiaSung Valley (Meghalaya), Samchampi (Mikir Hills, Assam)Cretaceous; linked to the Kerguelen plume and Sylhet–Rajmahal magmatism
Southern IndiaSevathur, Samalpatti and others in Tamil NaduProterozoic, along major shear zones
North-western IndiaNewania (Rajasthan), dolomiticProterozoic

Charnockites

Charnockite is an orthopyroxene-bearing granitoid (strictly, orthopyroxene granite; the charnockite series extends from orthopyroxene tonalite, “enderbite”, to orthopyroxene granite). Hand-specimen clues: dark greenish-grey to bluish colour, greasy or bluish quartz, waxy feldspar, often mesoperthite.

Two origins

Igneous (magmatic) charnockiteMetamorphic charnockite
crystallised from a hot, relatively dry granitic magma in which orthopyroxene, not biotite or hornblende, was stableformed by dehydration of amphibolite-facies gneiss during granulite-facies metamorphism
massive, homogeneous plutons; often with AMCG anorthositesgradational with gneiss; patchy
low water activity from dehydration melting or from infiltration of CO\(_2\)-rich fluids

The key reaction that makes orthopyroxene from a granitic gneiss:

$$\text{biotite} + \text{quartz} \;\to\; \text{orthopyroxene} + \text{K-feldspar} + \text{H}_2\text{O}\ (\text{or melt})$$

Anything that lowers water activity (higher temperature, CO\(_2\) dilution of the fluid, removal of water into melt) drives it to the right.

Incipient (arrested) charnockites

In southern India, at quarries such as Kabbaldurga (Karnataka) and Ponmudi (Kerala Khondalite Belt), dark charnockite patches cut across amphibolite-facies gneiss along veins and shear fractures. CO\(_2\)-rich fluid inclusions in the charnockite patches led to the model of CO\(_2\) streaming (fluid infiltration lowering \( a_{\text{H}_2\text{O}} \)). Others attribute such patches to local melting and melt extraction. These “charnockite-in-the-making” exposures are a classic CSIR NET topic.

Where

The Southern Granulite Terrain (Nilgiri, Biligirirangan, Shevaroy, Palni hills, Madurai Block, Kerala Khondalite Belt) and the Eastern Ghats Belt. The transition from amphibolite-facies gneisses of the Dharwar craton southward into granulites marks the orthopyroxene-in isograd in Karnataka and Tamil Nadu. Ages range widely: Neoarchaean in the northern granulites and Neoproterozoic to Cambrian (Pan-African) in the south.

Kimberlites and Lamproites

Kimberlite

A volatile-rich (CO\(_2\), H\(_2\)O), potassic, ultrabasic hybrid rock with a characteristic inequigranular texture: rounded macrocrysts of olivine (mostly mantle xenocrysts) in a fine groundmass of olivine, phlogopite, monticellite, spinel, perovskite, calcite and serpentine. It carries mantle xenoliths (garnet peridotite, eclogite) and, rarely, diamond.

Pipe anatomy:

FaciesDepthRock
Cratersurfacepyroclastic and reworked (epiclastic) kimberlite in a crater lake
Diatremeupper 1–2 kmcarrot-shaped body of tuffisitic kimberlite breccia
Root zone (hypabyssal)deepercoherent kimberlite dykes and sills

Indicator minerals used in exploration: Cr-pyrope garnet (high-Cr, low-Ca “G10” garnets from harzburgite, associated with diamond), Cr-diopside, picroilmenite (Mg-rich ilmenite) and chromite. They survive in stream sediments and point upstream to a pipe.

Diamond stability. Diamond is stable at high pressure: at mantle temperatures beneath cratons, roughly above 4.5–5 GPa, which is about 140–155 km depth (\( h = P/\rho g \) with \( \rho \approx 3.3 \) g cm\(^{-3}\)). Kimberlite magma is generated deeper still and rises quickly, picking up diamonds from the base of the thick, cold lithosphere. Clifford’s rule: diamondiferous kimberlites occur on old (Archaean) cratons, where the lithospheric keel is thick enough to enter the diamond field.

Group I and Group II. Group I is “archetypal” kimberlite; Group II (orangeite), known mainly from southern Africa, is micaceous and closer to lamproite.

Lamproite

Ultrapotassic, peralkaline-tending, MgO-rich rocks with phlogopite (often Ti-rich), K-richterite, leucite, sanidine and diopside, and very high K and incompatible elements. Some lamproites are diamond-bearing (the Argyle deposit in Australia is the famous example).

Indian occurrences

  • Wajrakarur kimberlite field (Anantapur district, Andhra Pradesh) and Narayanpet field (Telangana–Karnataka border), on the Eastern Dharwar craton; most dated to the Mesoproterozoic (about 1.1 Ga).
  • Majhgawan pipe near Panna (Madhya Pradesh), mined by NMDC; its classification (kimberlite versus lamproite) has been debated.
  • Historic “Golconda” diamonds came from alluvial gravels of the Krishna basin and from Proterozoic conglomerates such as the Banganapalle conglomerate of the Kurnool Group, not directly from pipes.

Ophiolites

An ophiolite is a slice of oceanic lithosphere thrust onto (obducted onto) a continental margin.

Penrose sequence (1972 definition, top to bottom)

UnitRocks
Sedimentary coverradiolarian chert, shale, minor limestone (pelagic)
Mafic volcanic complexpillow basalts and sheet flows
Mafic sheeted dyke complexdykes intruding dykes, with one-sided chilled margins
Gabbroic complexisotropic gabbro above layered cumulate gabbro
Ultramafic cumulatesdunite, wehrlite, pyroxenite; podiform chromitite near the base of the crust (the petrological Moho)
Mantle tectonitefoliated harzburgite (± lherzolite), the depleted residue of melting

Also commonly present: plagiogranite (sodic, felsic differentiates), and a metamorphic sole of amphibolite or granulite beneath the mantle section, formed at the start of thrusting and dating the beginning of emplacement.

Two Mohos: the petrological Moho lies at the base of the ultramafic cumulates (top of the mantle tectonite); the seismic Moho lies at the top of the cumulate ultramafics (where seismic velocity jumps from gabbro to peridotite values). In an ophiolite the two are therefore separated by the thickness of the ultramafic cumulates.

Mid-ocean ridge versus supra-subduction zone

FeatureMOR-typeSupra-subduction-zone (SSZ) type
Lava chemistryMORB-like; no Nb–Ta depletionarc-like: Nb–Ta depletion, enriched large-ion lithophiles; boninites
Mantlelherzolite to harzburgitevery depleted harzburgite; high Cr# spinel
Example abroadsome Alpine and Ligurian ophiolitesTroodos (Cyprus), Semail (Oman)

Most well-preserved ophiolites are SSZ type: they formed above a nascent subduction zone, which made them easier to obduct.

Indian ophiolites

  • Indus–Tsangpo Suture Zone, Ladakh: Nidar ophiolite (largely an intra-oceanic arc–ophiolite sequence) and Spontang ophiolite (a thrust klippe on the Indian margin).
  • Indo-Myanmar ranges: Naga Hills and Manipur ophiolites.
  • Andaman Islands: Andaman ophiolite in the outer-arc ridge of the Andaman subduction zone.

All represent Neo-Tethyan oceanic lithosphere, Mesozoic in age, emplaced as India approached and collided with Asia.

Granitoids

Granitoid covers quartz-rich plutonic rocks: granite, granodiorite, tonalite, trondhjemite and related types (named on the QAPF diagram).

Alphabet classification

TypeSourceKey features
I-type (igneous source)meta-igneous or mantle-derived sourcemetaluminous to weakly peraluminous (A/CNK below about 1.1); hornblende, titanite, magnetite; Na-rich; normative diopside; arc settings
S-type (sedimentary source)partial melting of metasedimentary rocksstrongly peraluminous (A/CNK above about 1.1); muscovite, cordierite, garnet, tourmaline, ilmenite; normative corundum; high \( ^{87}\)Sr/\( ^{86}\)Sr; collisional settings
A-type (anorogenic, alkaline, anhydrous)dry, hot melting; often residual crust or differentiated mantle meltshigh Fe/Mg, high Ga/Al, Zr, Nb, Y, REE; often peralkaline (A/NK below 1: sodic amphibole and pyroxene); rifts and post-collisional settings
M-type (mantle)fractionated mantle meltsplagiogranites in ophiolites and oceanic arcs

Ishihara’s complementary magnetite series (oxidised, mostly I-type) and ilmenite series (reduced, mostly S-type) relate to oxygen fugacity and to ore associations (Cu–Mo porphyries with magnetite series; Sn–W with ilmenite series).

Alumina saturation index:

$$\boxed{\text{A/CNK} = \frac{\text{Al}_2\text{O}_3}{\text{CaO} + \text{Na}_2\text{O} + \text{K}_2\text{O}}\ (\text{molar})} \qquad \text{A/NK} = \frac{\text{Al}_2\text{O}_3}{\text{Na}_2\text{O} + \text{K}_2\text{O}}$$
  • A/CNK > 1: peraluminous; A/CNK < 1 and A/NK > 1: metaluminous; A/NK < 1: peralkaline.

Tectonic discrimination. Trace-element diagrams such as Pearce and co-workers’ Rb versus (Y + Nb) separate volcanic-arc, syn-collisional, within-plate and ocean-ridge granites. Use them as guides, not proof: source composition can mimic setting.

Archaean TTG. The tonalite–trondhjemite–granodiorite suite, sodic and with steep REE patterns and low heavy REE, made much of the Archaean continental crust. It is usually interpreted as partial melting of hydrated basalt (amphibolite or eclogite) with garnet left in the residue.

Indian granitoids

GranitoidCraton or beltType and notes
Peninsular GneissDharwar cratonArchaean TTG gneisses, polyphase
Closepet GraniteDharwar cratonNeoarchaean (about 2.5 Ga), elongate north–south batholith; a classic example of crustal-scale magma transfer and mixing with mafic magma (enclaves, mixed zones)
Singhbhum GraniteSinghbhum cratonPalaeo- to Mesoarchaean, multiphase batholith
Bundelkhand GraniteBundelkhand cratonNeoarchaean to Palaeoproterozoic, K-rich
Malani Igneous Suitewestern RajasthanNeoproterozoic (about 750 Ma); one of the largest felsic igneous provinces in India; A-type granites (Jalore, Siwana; Siwana is peralkaline) with rhyolites
Ladakh (Trans-Himalayan) BatholithIndus–Tsangpo SutureI-type, subduction-related; Cretaceous to Palaeogene
Himalayan leucogranitesHigher Himalaya (Badrinath, Gangotri)Miocene; S-type, muscovite–tourmaline; melting of metasediments during and after collision

Memory Tricks

Don’t Confuse

ThisvsThat
Archaean anorthosite: very calcic plagioclase, chromititeMassif anorthosite: andesine–labradorite, AMCG, Fe–Ti ores
Carbonatite: igneous, over 50% carbonateMarble: metamorphosed sedimentary carbonate
Charnockite: orthopyroxene granitoidEnderbite: orthopyroxene tonalite
Kimberlite: ultrabasic, olivine macrocrystsLamproite: ultrapotassic, phlogopite–richterite–leucite
Petrological Moho: base of cumulatesSeismic Moho: velocity jump, top of cumulate ultramafics
S-type: peraluminous, ilmenite seriesI-type: metaluminous, magnetite series
Red bole: weathered surface between flowsIntertrappean bed: sediment layer between flows
Rajmahal Traps: Early Cretaceous, KerguelenDeccan Traps: about 66 Ma, Réunion

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What is the minimum modal carbonate content of a carbonatite?
  2. Which mineral defines a charnockite?
  3. Name the Deccan formation that is least contaminated by continental crust.
Answers
  1. More than 50% primary carbonate.
  2. Orthopyroxene (in a granitoid).
  3. Ambenali Formation (Wai Subgroup).

Level 2: Part B Style

Practice Q1. Which association is characteristic of Proterozoic massif-type anorthosites?

(a) calcic bytownite–anorthite with chromitite layers (b) andesine–labradorite with mangerite, charnockite and rapakivi granite (c) olivine macrocrysts with pyrope and ilmenite (d) pillow basalts and sheeted dykes

Answer: (b)

Massif anorthosites belong to the AMCG suite. (a) describes Archaean anorthosites like Sittampundi; (c) kimberlite; (d) ophiolite.

Practice Q2. The order of units in an ophiolite, from top to bottom, is:

(a) pillow lava, sheeted dykes, gabbro, harzburgite (b) sheeted dykes, pillow lava, harzburgite, gabbro (c) gabbro, pillow lava, sheeted dykes, harzburgite (d) harzburgite, gabbro, sheeted dykes, pillow lava

Answer: (a)

Under the pelagic sediment come pillow lavas, sheeted dykes (feeders), gabbros (magma chamber) and mantle harzburgite. Option (d) is the same sequence upside down.

Practice Q3. A granite has (wt%) Al\(_2\)O\(_3\) 14.0, CaO 1.0, Na\(_2\)O 3.2, K\(_2\)O 5.0. Its A/CNK and type are closest to:

(a) 0.72, peralkaline (b) 0.95, metaluminous I-type (c) 1.12, peraluminous, S-type tendency (d) 1.31, metaluminous

Answer: (c)

Moles: Al\(_2\)O\(_3\) \( 14.0/101.96 = 0.1373 \); CaO \( 1.0/56.08 = 0.0178 \); Na\(_2\)O \( 3.2/61.98 = 0.0516 \); K\(_2\)O \( 5.0/94.20 = 0.0531 \). A/CNK \( = 0.1373/0.1225 = 1.12 \): peraluminous. Option (d) is A/NK (1.31), which is not used to define metaluminous.

Practice Q4. Diamond-bearing kimberlites are typically found on old cratons because:

(a) cratons have high heat flow that melts carbon (b) only thick, cold lithospheric keels extend into the diamond stability field (c) kimberlites form only by melting of Archaean crust (d) cratons are rich in limestone that converts to diamond

Answer: (b)

This is the reasoning behind Clifford’s rule. Cratons have low heat flow; kimberlites are mantle melts, not crustal melts.

Level 3: Part C Style

Practice Q5. A plume-derived Deccan basalt magma has Sr = 250 ppm and \( ^{87}\)Sr/\( ^{86}\)Sr = 0.7035. It assimilates upper crust with Sr = 150 ppm and \( ^{87}\)Sr/\( ^{86}\)Sr = 0.7200 (treat as simple bulk mixing). Which statements are correct?

  1. With 10% crust in the mixture, \( ^{87}\)Sr/\( ^{86}\)Sr is about 0.7045.
  2. To reach 0.7080 requires roughly 39% crust by mass.
  3. Simple mixing with this much crust would also strongly change major-element chemistry, so high ratios in real flows are better explained by AFC, which raises the isotope ratio with less bulk change.
  4. Fractional crystallisation of plagioclase alone could raise \( ^{87}\)Sr/\( ^{86}\)Sr to 0.7080.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • 1 true: Sr \( = 0.9\times 250 + 0.1\times 150 = 240 \) ppm; ratio \( = (225\times 0.7035 + 15\times 0.7200)/240 = 0.70453 \).
  • 2 true: solving \( [(1 - f)250\times 0.7035 + f\times 150\times 0.7200]/[(1 - f)250 + 150f] = 0.7080 \) gives \( f \approx 0.39 \).
  • 3 true: 39% bulk assimilation would shift SiO\(_2\) and other oxides far from basalt. In AFC, crystallisation supplies the heat for assimilation and the crust’s high-ratio Sr dominates the isotopic signal while the melt stays basaltic.
  • 4 false: crystallisation does not fractionate Sr isotopes measurably.

Practice Q6. In a quarry in southern India, dark, coarse orthopyroxene-bearing patches cut across biotite–hornblende gneiss along a shear fracture. The patches contain CO\(_2\)-rich fluid inclusions; biotite is less abundant inside them. Which statements are correct?

  1. The patches are incipient (arrested) charnockites.
  2. Lowering of water activity, by CO\(_2\) infiltration or by removal of water into melt, drove biotite + quartz \( \to \) orthopyroxene + K-feldspar + H\(_2\)O.
  3. The patches must be younger than the gneissic foliation they cut.
  4. The patches prove that all charnockite massifs of the region are igneous.

(a) 1, 2 and 3 only (b) 2 and 4 only (c) 1 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

These features describe arrested charnockite formation (as at Kabbaldurga and Ponmudi). The reaction needs low \( a_{\text{H}_2\text{O}} \). Cross-cutting the foliation makes the patches younger. Statement 4 is false: these patches point to a metamorphic origin for this occurrence and say nothing about all charnockites.

Practice Q7. Taking a mean density of 3.3 g cm\(^{-3}\) for the overlying column and \( g = 9.81 \) m s\(^{-2}\), the minimum depth for diamond stability at 4.5 GPa, and the implication, are best stated as:

(a) about 14 km; diamonds can form in thickened crust (b) about 139 km; the lithosphere must be thicker than this for diamonds to be stored (c) about 1,390 km; diamonds come from the lower mantle only (d) about 46 km; diamonds form at the Moho

Answer: (b) about 139 km

\( h = P/(\rho g) = 4.5\times 10^{9}/(3300\times 9.81) = 1.39\times 10^{5} \) m \( \approx 139 \) km. Cold, thick cratonic keels reach this depth below the diamond–graphite boundary. Options (a) and (c) slip a factor of 10. (Some diamonds do come from much deeper, the “superdeep” ones, but that does not change the minimum depth.)

Quick Revision Table

SuiteMust-know facts
Deccanabout 66 Ma, mostly chron 29r; tholeiitic; Réunion plume; Kalsubai–Lonavala–Wai; Bushe contaminated, Ambenali least; red boles, intertrappeans, Lameta below
Anorthositeover 90% plagioclase; Archaean calcic (Sittampundi, chromitite); Proterozoic massif (AMCG; Chilka Lake, Bolangir)
Carbonatiteover 50% carbonate; sövite, alvikite, beforsite, natrocarbonatite; fenite; REE, Nb, P, F; Amba Dongar, Sung Valley, Sevathur, Newania
Charnockiteorthopyroxene granitoid; Holland 1893; St Thomas Mount; Bt + Qz \( \to \) Opx + Kfs + H\(_2\)O; incipient at Kabbaldurga, Ponmudi
Kimberliteultrabasic, CO\(_2\)–H\(_2\)O-rich; crater–diatreme–root; G10 pyrope, Cr-diopside, picroilmenite, chromite; Wajrakarur, Narayanpet, Majhgawan; Clifford’s rule
OphiolitePenrose: sediments, pillows, sheeted dykes, gabbro, cumulates, harzburgite; SSZ common; Nidar, Spontang, Naga Hills, Andaman
GranitoidsI, S, A, M; A/CNK; TTG; Closepet, Malani (A-type), Ladakh (I), Himalayan leucogranite (S)

Key Takeaways

What’s Next

Advertisement
Advertisement