Skip to content

Cratons, Mobile Belts and Proterozoic Basins of India

CSIR NET Earth Sciences Part C: Dharwar, Bastar, Singhbhum and Aravalli–Bundelkhand cratons, Indian mobile belts, Cuddapah, Vindhyan and other Purana basins.

  • 20 min read
  • Updated
On this page · 18 sections
  1. Prerequisites
  2. The Hook: A Shield Built From Blocks
  3. Vocabulary: Craton, Mobile Belt, Basin
  4. The Indian Shield: Big Picture
  5. The Dharwar Craton
  6. The Bastar Craton
  7. The Singhbhum Craton
  8. The Aravalli–Bundelkhand Craton
  9. The Mobile Belts
  10. Proterozoic (Purana) Basins
  11. Using Nd Model Ages to Read Crustal History
  12. Memory Tricks
  13. Don’t Confuse
  14. Common Mistakes
  15. Practice
  16. Quick Revision Table
  17. Key Takeaways
  18. What’s Next

Prerequisites

The Hook: A Shield Built From Blocks

Vocabulary: Craton, Mobile Belt, Basin

TermMeaning
Cratonpart of the continent that has been tectonically stable for a long time (since the Archean or Paleoproterozoic); thick, cold, depleted lithospheric keel; old granite–gneiss and greenstone basement
Shielda craton where Precambrian basement is exposed at the surface (the Indian Shield); a platform is a craton covered by younger sediments
Mobile belta linear belt of repeated deformation, metamorphism and magmatism, usually between cratons; the record of Precambrian orogens, sutures and rifts
Proterozoic (Purana) basinan intracratonic or marginal sedimentary basin of Proterozoic age, mostly unmetamorphosed and gently dipping, deformed mainly along its margins; “Purana” means “ancient”

The Indian Shield: Big Picture

The shield is usually divided into a Southern Indian Block (Dharwar, Bastar and Singhbhum cratons) and a Northern Indian Block (Aravalli–Bundelkhand craton), separated by the Central Indian Tectonic Zone (CITZ), often called the Satpura mobile belt.

graph TD
    N["Northern Indian Block
Aravalli-Bundelkhand craton
BGC, Bundelkhand granite"] CITZ["Central Indian Tectonic Zone
(Satpura mobile belt)
Mahakoshal, Sausar, Betul belts"] B["Bastar craton
Bailadila BIF, Dongargarh"] S["Singhbhum craton
OMG, Singhbhum Granite, IOG"] D["Dharwar craton
WDC and EDC, Closepet Granite"] EG["Eastern Ghats Belt
khondalite, charnockite, about 1.0 Ga"] SGT["Southern Granulite Terrain
shear-bounded granulite blocks"] N --- CITZ CITZ --- B CITZ --- S B ---|"Godavari rift"| D B ---|"Mahanadi rift"| S B --- EG D --- EG D --- SGT
CratonBounded byOldest components (approx.)Signature unitsProterozoic cover
DharwarGodavari rift (NE), Eastern Ghats Belt (E), SGT (S), Deccan Traps cover (N, W)TTG and Sargur Group, older than about 3.0 Ga (some to about 3.4 Ga)Peninsular Gneiss, Sargur Group, Dharwar Supergroup, Closepet GraniteCuddapah, Kaladgi, Bhima, Pranhita–Godavari
BastarGodavari rift (SW), Mahanadi rift (NE), CITZ (N), Eastern Ghats Belt (SE)TTG gneisses, about 3.5–3.0 Ga in placesBailadila Group (BIF), Dongargarh Supergroup, Malanjkhand granite (Cu) near its northern marginChhattisgarh, Indravati, Khariar
SinghbhumSinghbhum Shear Zone and North Singhbhum Mobile Belt (N), Mahanadi rift and Eastern Ghats (S, SW)Older Metamorphic Group and Older Metamorphic Tonalite Gneiss, about 3.5–3.3 GaSinghbhum Granite, Iron Ore Group, Dhanjori and Dalma volcanics, Newer Dolerite dykesKolhan Group
Aravalli–BundelkhandCITZ / Son–Narmada zone (S); Great Boundary Fault separates Vindhyan cover from Aravalli basementBanded Gneissic Complex (BGC) and Bundelkhand TTG, about 3.3 Ga and youngerBGC, Berach Granite and Bundelkhand Granite (about 2.5 Ga), Aravalli and Delhi supergroupsVindhyan, Bijawar, Gwalior, Marwar

The Dharwar Craton

The largest Indian craton, covering most of Karnataka and parts of Andhra Pradesh, Telangana and Tamil Nadu.

Western versus Eastern Dharwar Craton

Western Dharwar Craton (WDC)Eastern Dharwar Craton (EDC)
Basementolder TTG gneisses (Peninsular Gneiss), about 3.4–3.0 Gayounger granitoids (the “Dharwar batholith”), mostly about 2.7–2.5 Ga
Greenstoneslarge belts with thick sediments: Sargur-type (Nuggihalli, Holenarsipur) and Dharwar Supergroup (Bababudan, Chitradurga, Shimoga)narrow, volcanic-dominated belts: Kolar, Hutti, Ramagiri, Sandur
Crustthicker, olderyounger, more juvenile, more granite
OresBIF iron (Bababudan, Kudremukh), manganesegold (Kolar, Hutti, Ramagiri); kimberlite fields (Wajrakarur, Narayanpet)

The boundary is placed by many workers along the Chitradurga Shear Zone (some place it at the western edge of the Closepet Granite).

Stratigraphy of the WDC

graph BT
    PG["Peninsular Gneiss (TTG)
about 3.4-3.0 Ga"] --> SG["Sargur Group
high-grade supracrustals:
ultramafics, quartzite, marble, pelites"] SG --> BB["Bababudan Group
(lower Dharwar Supergroup)
mafic volcanics, quartzite, BIF"] BB --> CG["Chitradurga Group
(upper Dharwar Supergroup)
greywacke, BIF, mafic-felsic volcanics"] CG --> CL["Closepet Granite
about 2.5 Ga, N-S belt"]
  • The Sargur Group is older than much of the Peninsular Gneiss that intrudes it and older than the Dharwar Supergroup. Its unconformable relation with the Dharwar Supergroup (seen in places as a basal quartzite–conglomerate) is a key stratigraphic marker.
  • The Closepet Granite is a long, narrow, roughly north–south belt of late Archean potassic granite with charnockitic portions at its southern end. It is a classic example of late Archean crustal stabilisation (cratonisation).

South to the granulites

Southwards the Dharwar grades into charnockite (the “orthopyroxene isograd” or old Fermor line) and then into the Southern Granulite Terrain (SGT), bounded and divided by large shear zones:

From north to southNotes
Northern granulite blocks (Biligirirangan, Nilgiri, Shevaroy hills)Neoarchean charnockites, about 2.5 Ga, continuous with the Dharwar crust
Moyar–Bhavani Shear Zone
Palghat–Cauvery Shear Zoneinterpreted by many as a Neoproterozoic–Cambrian suture of Gondwana assembly
Madurai Blockcharnockites and UHT granulites, Pan-African metamorphism (about 0.6–0.5 Ga)
Achankovil Shear Zone
Trivandrum BlockKerala Khondalite Belt; Pan-African metamorphism

The Bastar Craton

Also called the Central Indian or Bhandara craton. It lies between the Godavari and Mahanadi rifts.

UnitCharacter
TTG gneisses and granitoidsArchean basement; some of the oldest ages in central India
Bailadila GroupBIF; high-grade hematite ore at Bailadila (Chhattisgarh)
Bengpal and Sukma groupsolder supracrustals (metamorphosed)
Dongargarh Supergroup (Nandgaon and Khairagarh groups)Neoarchean to Paleoproterozoic (about 2.5 Ga) felsic and mafic volcanics and sediments
Sakoli belt; Malanjkhand granitebelts at the northern edge (Sakoli: Paleo- to Neoproterozoic, debated); the granite at Malanjkhand (about 2.5 Ga) (Madhya Pradesh) hosts a large copper deposit
Proterozoic coverChhattisgarh (Chandarpur and Raipur groups), Indravati, Khariar basins; tin-bearing pegmatites in Bastar

The Singhbhum Craton

In Jharkhand and Odisha, south of the Singhbhum Shear Zone. It preserves some of India’s oldest rocks.

graph BT
    OMG["Older Metamorphic Group (OMG)
supracrustals: pelites, quartzites,
amphibolites; about 3.3-3.5 Ga"] --> OMTG["Older Metamorphic Tonalite Gneiss
TTG, about 3.4-3.3 Ga"] OMTG --> SBG["Singhbhum Granite batholith
several phases, about 3.3-3.1 Ga"] OMTG --> IOG["Iron Ore Group (IOG)
BIF, volcanics, shales
(age range debated)"] SBG --> PAL["Paleoproterozoic cover and volcanics:
Dhanjori, Simlipal, Jagannathpur, Malangtoli"] PAL --> ND["Newer Dolerite dyke swarm"]
  • The Iron Ore Group BIFs form the Jamda–Koira (Noamundi–Joda–Barbil) iron field, among India’s largest (Jharkhand–Odisha border).
  • North of the craton the Singhbhum Shear Zone (copper at Rakha–Mosabani; uranium at Jaduguda, Bhatin, Narwapahar, Turamdih) separates it from the North Singhbhum Mobile Belt (Singhbhum Group metasediments, Dalma volcanics), and beyond that the Chhotanagpur Gneissic Complex.
  • Sukinda (Odisha) chromite lies in ultramafic rocks near the southern part of the craton.

The Aravalli–Bundelkhand Craton

Aravalli region (Rajasthan)

UnitCharacterApprox. age
Banded Gneissic Complex (BGC)migmatitic TTG gneisses, amphibolites; basementabout 3.3–2.5 Ga
Berach Granitepotassic granite intruding BGC near Chittorgarhabout 2.5 Ga
Aravalli Supergroupquartzites, carbonates, phyllites, volcanics; stromatolitic phosphorite (Jhamarkotra, near Udaipur); Zawar Pb–ZnPaleoproterozoic
Delhi SupergroupAlwar and Ajabgarh groups; North Delhi belt (Khetri copper) and South Delhi beltPaleo- to early Neoproterozoic; South Delhi belt deformation about 1.0 Ga
Erinpura Granitesyn- to post-tectonic granites in the South Delhi beltearly Neoproterozoic
Malani Igneous Suitelarge felsic volcanic–plutonic province (rhyolites, Jalore and Siwana granites)about 0.77–0.75 Ga
Marwar Supergroupsandstones, carbonates, evaporites unconformable on MalaniEdiacaran–Cambrian (see next page)

The Aravalli–Delhi Fold Belt runs north-east–south-west for roughly 700 km. Its eastern side is cut by the Great Boundary Fault, which juxtaposes Vindhyan sediments against the Aravalli basement.

Bundelkhand

The Bundelkhand Craton (Uttar Pradesh–Madhya Pradesh) is a near-circular granite–gneiss terrain:

  • older TTG gneisses and small greenstone remnants (Mesoarchean–Paleoarchean);
  • the dominant Bundelkhand Granite, potassic, about 2.5 Ga;
  • prominent giant quartz reefs (NE–SW) and later mafic dyke swarms (NW–SE);
  • Paleoproterozoic Bijawar and Gwalior groups along its margins; Vindhyan rocks wrap around it to the south and east.

The Mobile Belts

Mobile beltLocationKey rocks and featuresMain activity (approx.)
Aravalli–Delhi Fold BeltRajasthan, Gujarat, HaryanaAravalli and Delhi supergroups; ophiolitic remnants (e.g. Phulad); Khetri Cu, Zawar Pb–ZnPaleoproterozoic to early Neoproterozoic
Central Indian Tectonic Zone (Satpura mobile belt)across central India between the Northern and Southern blocksMahakoshal belt (Paleoproterozoic volcano-sedimentary), Sausar belt (Mn ores of Nagpur–Balaghat), Betul belt, granulitesPaleo- to Mesoproterozoic, last major event about 1.0 Ga
Eastern Ghats BeltOdisha–Andhra Pradesh coastkhondalite, charnockite, leptynite, enderbite, massif anorthosite (Chilka Lake), UHT granulites, alkaline complexes along its western margin; bauxite capsmainly about 1.0 Ga (linked with East Antarctica’s Rayner Complex in Rodinia); older (about 1.6 Ga) and Pan-African domains
Southern Granulite TerrainTamil Nadu, Kerala, southern Karnatakashear-bounded granulite blocks (table above)Neoarchean in the north; Pan-African in Madurai and Trivandrum blocks
North Singhbhum Mobile Belt and Chhotanagpur Gneissic ComplexJharkhand, West BengalSinghbhum Group, Dalma volcanics; CGC gneisses, granulites, anorthositesPaleo- to Mesoproterozoic

The Eastern Ghats Belt meets the Bastar and Dharwar cratons along a thrust–shear-zone boundary on its western side and is cut obliquely by the Mahanadi and Godavari Gondwana rifts.

The Shillong (Meghalaya) Plateau in north-east India also exposes Precambrian gneisses and the Proterozoic Shillong Group, an outlier of the shield detached by later faulting.

Proterozoic (Purana) Basins

Overview

BasinCratonMain units (base to top)Approx. ageNotable resources
CuddapahEastern DharwarPapaghni, Chitravati, Nallamalai groups; Srisailam Quartzite; Kurnool Groupabout 1.9 Ga (lower) to Neoproterozoic (Kurnool)uranium (Tummalapalle, in Vempalle dolostone); barytes (Mangampet); diamonds in Banganapalle conglomerate (Kurnool)
VindhyanBundelkhand and Aravalli; south of the Indo-Gangetic plainSemri Group (Lower Vindhyan); Kaimur, Rewa, Bhander groups (Upper Vindhyan)Semri about 1.7–1.6 Ga; Upper Vindhyan Mesoproterozoic to Neoproterozoic (debated)limestone (cement), building sandstone; diamonds of the Panna area (Majhgawan pipe; conglomerates in the Rewa Group)
ChhattisgarhBastarChandarpur Group (sandstones), Raipur Group (limestones, shales)Meso- to Neoproterozoiccement-grade limestone
Kaladginorthern DharwarBagalkot and Badami groupsMeso- to Neoproterozoicsandstones (the Badami cave temples are cut in them)
Bhimanorthern Dharwarlimestones and shalesNeoproterozoicShahabad limestone (flagstone)
Pranhita–Godavaribetween Dharwar and BastarPakhal, Penganga, Sullavai groups (below the Gondwana)Paleo- to Neoproterozoiclimestones
Indravati, KhariarBastarsandstones, shales, limestonesMeso- to Neoproterozoic
MarwarAravalli (west of it)Jodhpur, Bilara, Nagaur groupsEdiacaran–Cambrianevaporites; Baghewala heavy oil in the Bikaner–Nagaur basin

The Cuddapah Basin

A crescent-shaped basin in Andhra Pradesh, with the arcuate Nallamalai Fold Belt along its eastern margin.

graph BT
    BASE["Eastern Dharwar granitoids
(nonconformity)"] --> PAP["Papaghni Group
Gulcheru Quartzite, Vempalle Formation
(stromatolitic dolostone, U)"] PAP --> CHI["Chitravati Group
Pulivendla Quartzite, Tadpatri Formation
(shales with mafic sills and flows), Gandikota Quartzite"] CHI --> NAL["Nallamalai Group
Bairenkonda Quartzite, Cumbum Formation
(folded: Nallamalai Fold Belt)"] NAL --> SRI["Srisailam Quartzite"] SRI --> KUR["Kurnool Group
Banganapalle Qtz (diamonds), Narji Lst,
Owk Sh, Paniam Qtz, Koilkuntla Lst, Nandyal Sh"]

Key points:

  • The western part is nearly undeformed; the eastern part forms the Nallamalai Fold Belt, thrust westward, with the Eastern Ghats beyond.
  • Mafic sills in the Tadpatri Formation, dated near 1.9 Ga, give a minimum age for the lower Cuddapah.
  • The Kurnool Group, much younger, rests unconformably on the older groups.

The Vindhyan Basin

The largest Purana basin, extending from the Son valley through Bundelkhand to south-east Rajasthan, partly hidden under the Gangetic alluvium and Deccan Traps.

GroupLithologyNotes
Bhander (top)limestones, sandstones, shalesUpper Vindhyan
Rewasandstones, shales, diamondiferous conglomeratesUpper Vindhyan
Kaimursandstones, conglomeratesUpper Vindhyan
Semri (base)porcellanites (silicified volcanic ash: Deonar Formation), limestones (Rohtas, Kajrahat), shales, dolomites (Tirohan)Lower Vindhyan; volcanic layers dated about 1.6 Ga; Proterozoic microfossils and stromatolites
  • The Great Boundary Fault forms its north-western margin in Rajasthan; the Son–Narmada lineament lies to the south.
  • The Majhgawan diamondiferous pipe (Panna, Madhya Pradesh), intruding the Kaimur level and dated about 1.1 Ga, is the classic constraint on the age of the lower Upper Vindhyan. The age of the uppermost Vindhyan (Bhander) is still argued, with proposals ranging from late Mesoproterozoic to Ediacaran.
  • The Semri Group hosts some of the oldest claimed eukaryotic fossils (see the next page).

Why the basins formed

Most Purana basins began as intracratonic rifts or sags, often on old cratonic sutures, and later evolved into broad platforms. Several were deformed along one margin in later orogenies (the Nallamalai belt against the Eastern Ghats; the Vindhyan against the Great Boundary Fault). Their nearly undeformed interiors are among the best-preserved Proterozoic successions in the world.

Using Nd Model Ages to Read Crustal History

The Sm–Nd model age estimates when a crustal rock’s material separated from its mantle source:

$$\boxed{T_{\text{DM}} = \frac{1}{\lambda}\ln\left[1 + \frac{(^{143}\text{Nd}/^{144}\text{Nd})_{\text{s}} - (^{143}\text{Nd}/^{144}\text{Nd})_{\text{DM}}}{(^{147}\text{Sm}/^{144}\text{Nd})_{\text{s}} - (^{147}\text{Sm}/^{144}\text{Nd})_{\text{DM}}}\right]}$$

with \( \lambda_{147} = 6.54\times10^{-12}\ \text{yr}^{-1} \), “s” for sample and “DM” for the depleted-mantle reservoir today. The same formula with CHUR values gives \( T_{\text{CHUR}} \). The initial isotope ratio is compared with CHUR as

$$\varepsilon_{\text{Nd}}(t) = \left[\frac{(^{143}\text{Nd}/^{144}\text{Nd})_{\text{s}}(t)}{(^{143}\text{Nd}/^{144}\text{Nd})_{\text{CHUR}}(t)} - 1\right]\times10^{4}$$
ResultReading
\( T_{\text{DM}} \approx \) crystallisation age, \( \varepsilon_{\text{Nd}}(t) \) positivejuvenile crust: newly extracted from depleted mantle
\( T_{\text{DM}} \) much older than crystallisation age, \( \varepsilon_{\text{Nd}}(t) \) negativereworked older crust (or mixed source)

Applied to the Dharwar, Nd data have been read as showing a larger juvenile component in the EDC granitoids and more reworking of older crust in the WDC; the interpretation is debated.

Memory Tricks

Don’t Confuse

ThisvsThat
Sargur Group: older, high-grade supracrustals (WDC)Dharwar Supergroup: younger greenstones (Bababudan, Chitradurga)
Iron Ore Group: Singhbhum BIFBailadila Group: Bastar BIF
Banded Gneissic Complex: Aravalli basementPeninsular Gneiss: Dharwar basement
Great Boundary Fault: Vindhyan vs Aravalli basement (Rajasthan)Singhbhum Shear Zone: Singhbhum craton vs North Singhbhum belt (Cu, U)
Kolar, Hutti: gold in EDC greenstonesKhetri: copper in the North Delhi belt
Banganapalle conglomerate (Kurnool Group): diamondsMajhgawan pipe (Panna, Vindhyan region): diamonds in a primary pipe
Malani Igneous Suite: Neoproterozoic felsic volcanicsDalma volcanics: Proterozoic mafic volcanics in North Singhbhum
Eastern Ghats Belt: about 1.0 Ga (Rodinia)Madurai and Trivandrum blocks: Pan-African (Gondwana)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Which rift separates the Bastar and Singhbhum cratons?
  2. To which craton does the Sargur Group belong?
  3. Name the youngest group of the Vindhyan Supergroup.
Answers
  1. The Mahanadi rift (Gondwana graben).
  2. The Dharwar Craton (Western Dharwar).
  3. The Bhander Group.

Level 2: Part B Style

Practice Q1. Match the unit with its craton:

UnitCraton
P. Iron Ore Group1. Aravalli
Q. Banded Gneissic Complex2. Dharwar
R. Bailadila Group3. Singhbhum
S. Chitradurga Group4. Bastar

(a) P-3, Q-1, R-4, S-2 (b) P-4, Q-1, R-3, S-2 (c) P-3, Q-2, R-4, S-1 (d) P-1, Q-3, R-2, S-4

Answer: (a)

Iron Ore Group, Singhbhum; BGC, Aravalli basement; Bailadila, Bastar; Chitradurga Group, upper Dharwar Supergroup in the WDC. Note that both IOG and Bailadila are BIF hosts, which is why (b) is a tempting swap.

Practice Q2. Diamond-bearing conglomerates of the Cuddapah Basin belong to the:

(a) Gulcheru Quartzite (b) Tadpatri Formation (c) Banganapalle Quartzite (d) Cumbum Formation

Answer: (c)

The Banganapalle Quartzite at the base of the Kurnool Group contains diamondiferous conglomerates. Gulcheru is the basal Papaghni quartzite; Tadpatri is a shale-and-sill unit of the Chitravati Group; Cumbum belongs to the Nallamalai Group.

Practice Q3. Which pair is correctly matched?

(a) Great Boundary Fault – separates Dharwar and Bastar cratons (b) Singhbhum Shear Zone – copper and uranium mineralisation (c) Palghat–Cauvery Shear Zone – western margin of the Vindhyan Basin (d) Closepet Granite – Paleoproterozoic granite of the Aravalli belt

Answer: (b)

The Singhbhum Shear Zone hosts the Rakha–Mosabani copper and Jaduguda-area uranium deposits. The Great Boundary Fault is in Rajasthan (Vindhyan against Aravalli basement); the Palghat–Cauvery Shear Zone is in the SGT; the Closepet Granite is a late Archean granite of the Dharwar Craton.

Practice Q4. The main granulite-facies metamorphism of the Eastern Ghats Belt is commonly linked to the assembly of:

(a) Kenorland (b) Columbia (c) Rodinia (d) Pangea

Answer: (c) Rodinia

The about 1.0 Ga metamorphism is correlated with the Rayner Complex of East Antarctica, placing India against East Antarctica during Rodinia assembly. Pan-African events relate to Gondwana, not Pangea.

Level 3: Part C Style

Practice Q5. A late Archean granite from a craton has a zircon U–Pb crystallisation age of 2.50 Ga. Its present-day whole-rock data are \( ^{147}\text{Sm}/^{144}\text{Nd} = 0.1100 \) and \( ^{143}\text{Nd}/^{144}\text{Nd} = 0.511100 \). Use \( \lambda_{147} = 6.54\times10^{-12}\ \text{yr}^{-1} \); present depleted mantle \( ^{143}\text{Nd}/^{144}\text{Nd} = 0.51315 \), \( ^{147}\text{Sm}/^{144}\text{Nd} = 0.2137 \); present CHUR 0.512638 and 0.1967. Which conclusion is correct?

(a) \( T_{\text{DM}} \approx 2.5 \) Ga and \( \varepsilon_{\text{Nd}}(t) \approx +3 \): juvenile crust (b) \( T_{\text{DM}} \approx 3.0 \) Ga and \( \varepsilon_{\text{Nd}}(t) \approx -2 \): the granite contains reworked older crust (c) \( T_{\text{DM}} \approx 2.7 \) Ga and \( \varepsilon_{\text{Nd}}(t) \approx +2 \): mantle-derived (d) \( T_{\text{DM}} \approx 4.0 \) Ga: Hadean crust

Answer: (b)

Model age:

$$T_{\text{DM}} = \frac{1}{6.54\times10^{-12}}\ln\left[1 + \frac{0.511100 - 0.51315}{0.1100 - 0.2137}\right] = \frac{\ln(1 + 0.019769)}{6.54\times10^{-12}} = \frac{0.019576}{6.54\times10^{-12}} \approx 2.99\ \text{Ga}$$

(\( T_{\text{CHUR}} \) by the same formula is about 2.69 Ga.)

Initial ratios at 2.50 Ga: \( e^{\lambda t} - 1 = 0.016484 \).

  • Sample: \( 0.511100 - 0.1100\times0.016484 = 0.509287 \)
  • CHUR: \( 0.512638 - 0.1967\times0.016484 = 0.509396 \)
$$\varepsilon_{\text{Nd}}(2.5\ \text{Ga}) = \left(\frac{0.509287}{0.509396} - 1\right)\times10^4 \approx -2.1$$

A model age about 0.5 Gyr older than crystallisation and a negative \( \varepsilon_{\text{Nd}} \) show that the granite melted, or mixed with, older (about 3.0 Ga) crust. This is the pattern of late Archean K-granites that stabilised cratons.

Practice Q6. In a hypothetical Proterozoic basin, a tuff 50 m above the basal unconformity gives a zircon age of 1,630 Ma. The basin fill above the tuff is 3,500 m thick, and a lamproite pipe that cuts the uppermost beds gives 1,070 Ma. Which statements are correct?

  1. The average accumulation rate of the 3,500 m above the tuff was at least about 6.3 m per Myr.
  2. Deposition of the uppermost beds must have ended before 1,070 Ma.
  3. The rate calculated is a maximum, because some of the interval may be unconformities.
  4. Diamonds in a conglomerate within the upper part of the fill could have come from the 1,070 Ma pipe.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2 and 4 only

Answer: (a) 1 and 2 only
  • 1 true: the 3,500 m accumulated in at most \( 1630 - 1070 = 560 \) Myr, so the mean rate was at least \( 3500/560 = 6.25 \approx 6.3 \) m per Myr.
  • 2 true: the pipe cuts the beds (cross-cutting), so the beds are older than 1,070 Ma.
  • 3 false: because 560 Myr is the maximum available time, the rate is a minimum average. Hidden unconformities would make the actual depositional rate during sedimentation even higher, not lower.
  • 4 false: the conglomerate is older than the pipe that cuts it, so it cannot contain diamonds eroded from that pipe. (This is why diamondiferous conglomerates above a pipe’s level, and the pipe’s own age, are used together as stratigraphic age constraints.)

Practice Q7. A sample suite from a craton boundary yields:

TerraneZircon U–Pb crystallisation (Ga)\( T_{\text{DM}} \) (Ga)Peak metamorphism
X3.353.4amphibolite facies, about 3.2 Ga
Y2.552.6greenschist facies
Z0.98 (metamorphic rims), cores 1.62.2UHT granulite, about 1.0 Ga

Which assignment is most consistent with the Indian shield?

(a) X Eastern Ghats, Y Singhbhum, Z Dharwar EDC (b) X Singhbhum (OMTG-type), Y Eastern Dharwar greenstone-granite, Z Eastern Ghats (c) X Vindhyan, Y Bundelkhand, Z Southern Granulite Terrain north (d) X Madurai Block, Y Aravalli, Z Cuddapah

Answer: (b)
  • X: Paleoarchean juvenile TTG (\( T_{\text{DM}} \approx \) crystallisation age) metamorphosed early: Singhbhum’s Older Metamorphic Tonalite Gneiss type.
  • Y: Neoarchean juvenile granitoid with low-grade greenstones: Eastern Dharwar.
  • Z: about 1.0 Ga UHT granulite with older (about 1.6 Ga) zircon cores and Paleoproterozoic model ages: Eastern Ghats Belt.

The Vindhyan and Cuddapah are sedimentary basins, not metamorphic terranes with these ages, and the northern SGT is Neoarchean, not 1.0 Ga.

Quick Revision Table

TopicKey facts
BlocksSouthern (Dharwar, Bastar, Singhbhum) and Northern (Aravalli–Bundelkhand), separated by CITZ
RiftsGodavari (Dharwar/Bastar), Mahanadi (Bastar/Singhbhum)
DharwarWDC: Peninsular Gneiss, Sargur, Bababudan, Chitradurga; EDC: younger granitoids, Kolar, Hutti; Closepet Granite about 2.5 Ga; Chitradurga Shear Zone boundary
BastarBailadila BIF, Dongargarh Supergroup, Malanjkhand Cu; Chhattisgarh and Indravati basins
SinghbhumOMG, OMTG, Singhbhum Granite, Iron Ore Group; Singhbhum Shear Zone Cu–U; Dalma volcanics to the north
AravalliBGC basement, Aravalli (Jhamarkotra phosphorite, Zawar) and Delhi (Khetri) supergroups, Erinpura Granite, Malani about 0.77–0.75 Ga
BundelkhandBundelkhand Granite about 2.5 Ga, quartz reefs, mafic dykes; Bijawar, Gwalior groups
Mobile beltsADFB, CITZ (Mahakoshal, Sausar Mn), Eastern Ghats (about 1.0 Ga), SGT, North Singhbhum, CGC
SGT shear zonesMoyar–Bhavani, Palghat–Cauvery, Achankovil; Madurai and Trivandrum blocks Pan-African
CuddapahPapaghni, Chitravati, Nallamalai, Srisailam, Kurnool; Tummalapalle U; Banganapalle diamonds
VindhyanSemri (about 1.6 Ga), Kaimur, Rewa, Bhander; Great Boundary Fault; Majhgawan pipe about 1.1 Ga
Other Purana basinsChhattisgarh, Kaladgi, Bhima, Pranhita–Godavari, Indravati, Khariar, Marwar
Nd model age\( T_{\text{DM}} \) = mantle extraction; \( \varepsilon_{\text{Nd}}(t) < 0 \) = reworked crust

Key Takeaways

What’s Next