Skip to content

Sedimentology and Stratigraphy Short Notes

One-page CSIR NET Part C revision: sediment classification, transport, facies, diagenesis, stratigraphic code, sequences, climate history, Indian stratigraphy.

  • 12 min read
  • Updated
On this page · 11 sections
  1. Part C in one table
  2. Grain size and classification
  3. Transport, textures and structures
  4. Facies, environments, basins
  5. Diagenesis
  6. Stratigraphic code, GSSP and correlation
  7. Walther’s law and sequence stratigraphy
  8. Earth’s climatic history
  9. Phanerozoic stratigraphy of India
  10. Ten-question self-test
  11. Where next

Every formula, classification and trap from Classification of Sediments and Sedimentary Rocks, Sediment Transport, Textures and Structures, Facies, Environments, Basins and Diagenesis, Stratigraphic Code, GSSP, Correlation and Sequence Stratigraphy, Earth’s Climatic History and Phanerozoic Stratigraphy of India, on one page.

Part C in one table

Per the NTA information bulletin for December 2026, Earth Sciences Part C:

GivenAttemptCorrectWrongMaximum
8025+4−1.32100

Only the first 25 answered Part C questions are evaluated. Part C is split by discipline; this unit is in the Geology section. Full pattern on the Earth Sciences overview. The Part B basics behind this unit are in Soils, Sediments and Sedimentary Rocks.

Grain size and classification

$$\boxed{\phi = -\log_2 D \quad (D \text{ in mm})} \qquad \boxed{D = 2^{-\phi}}$$
Classmmφ
Boulder / cobble / pebble / granule> 256 / 64–256 / 4–64 / 2–4< −8 / −6 to −8 / −2 to −6 / −1 to −2
Sand (very coarse to very fine)2 to 1/16−1 to 4
Silt1/16 to 1/2564 to 8
Clay< 1/256 (3.9 µm)> 8
  • Sandstone parts: framework (Q, F, L), matrix, cement, pores. Normalise Q + F + L = 100 before naming.
  • Dott: arenite < 15% matrix; wacke 15–75%; mudrock > 75%.
  • Folk: quartzarenite ≥ 95% Q; subarkose / sublitharenite 75–95% Q; below 75%, F : R > 3 : 1 arkose, 3 : 1–1 : 1 lithic arkose, 1 : 1–1 : 3 feldspathic litharenite, < 1 : 3 litharenite. Chert goes to R in Folk, to Qt in Dickinson’s QFL.
  • Textural maturity (Folk): immature (> 5% clay matrix) → submature → mature → supermature. A textural inversion is a conflict between stages.
  • ZTR = zircon + tourmaline + rutile; high = mature or recycled. Chromite and spinel = ophiolite; kyanite, staurolite, garnet = metamorphic source.
  • Dickinson provenance: continental block, magmatic arc, recycled orogen.
  • Clay minerals and climate: kaolinite (warm, humid, leached), smectite (seasonal, poorly drained), illite and chlorite (physical weathering).
Carbonate schemeBasisNames
Folkallochem + matrix or cementoosparite, biomicrite, pelsparite, intramicrite, micrite, dismicrite, biolithite
Dunhamdepositional texturemudstone (< 10% grains), wackestone, packstone (grain-supported, mud present), grainstone (no mud), boundstone, crystalline
Embry–Klovancoarse reef rocksfloatstone (matrix-supported > 2 mm), rudstone (grain-supported > 2 mm); bafflestone, bindstone, framestone
  • Aragonite and high-Mg calcite are metastable; low-Mg calcite is stable; most dolomite is diagenetic.
  • Evaporite order: carbonate → gypsum / anhydrite → halite → K–Mg salts (increasing solubility).
  • Silica: opal-A → opal-CT → quartz. BIF mainly Archean–Paleoproterozoic, brief Cryogenian return; ironstone Phanerozoic, oolitic.
  • Coal rank: peat → lignite → sub-bituminous → bituminous → anthracite. Pyroclasts: ash < 2 mm, lapilli 2–64 mm, blocks and bombs > 64 mm.

Transport, textures and structures

$$\boxed{Re = \frac{\rho U L}{\mu}} \qquad \boxed{Fr = \frac{U}{\sqrt{gh}}} \qquad \boxed{\tau_0 = \rho g h S} \qquad \boxed{u_* = \sqrt{\tau_0/\rho}}$$$$\boxed{w_s = \frac{(\rho_s - \rho) g D^2}{18\mu}} \qquad \boxed{\theta = \frac{\tau_0}{(\rho_s - \rho) g D},\ \theta_c \approx 0.045} \qquad \boxed{P = \frac{w_s}{\kappa u_*}}$$
  • Stokes only for particle Re < 1 (in water, grains finer than about 0.1 mm).
  • Rouse: P > 2.5 bedload; 1.2–2.5 partly suspended; 0.8–1.2 fully suspended; < 0.8 wash load.
  • Bedforms: ripples → dunes (Fr < 1, lower regime) → upper plane bed (parting lineation) → antidunes (Fr near 1, upper regime). No ripples above about 0.6–0.7 mm.
  • Gravity flows (support): turbidity current (turbulence), fluidised (escaping fluid), liquefied (pore pressure), grain flow (dispersive pressure, inverse grading), debris flow (matrix strength).
  • Bouma: Ta massive or graded, Tb parallel, Tc ripples and convolute, Td parallel silt, Te mud. Proximal Tab; distal Tcde.

Folk and Ward (1957):

$$M_z = \frac{\phi_{16}+\phi_{50}+\phi_{84}}{3} \qquad \sigma_I = \frac{\phi_{84}-\phi_{16}}{4} + \frac{\phi_{95}-\phi_5}{6.6}$$$$Sk_I = \frac{\phi_{16}+\phi_{84}-2\phi_{50}}{2(\phi_{84}-\phi_{16})} + \frac{\phi_5+\phi_{95}-2\phi_{50}}{2(\phi_{95}-\phi_5)} \qquad K_G = \frac{\phi_{95}-\phi_5}{2.44(\phi_{75}-\phi_{25})}$$
Sorting \( \sigma_I \)< 0.350.35–0.500.50–0.710.71–1.001.00–2.002.00–4.00> 4.00
Classvery wellwellmoderately wellmoderatelypoorlyvery poorlyextremely poorly
  • Skewness in φ: positive = fine tail (rivers, often dunes); negative = coarse tail (beaches). Kurtosis: platy < 0.90, meso 0.90–1.11, lepto 1.11–1.50.
  • Zingg shapes: oblate, equant, bladed, prolate (b/a and c/b at 2/3). Roundness and sphericity are independent.
  • Imbrication: river pebbles dip upstream, a(t)b(i); till long axes parallel to flow. Packing porosity: cubic 47.6%, rhombohedral 26.0%.
  • Flute casts: blunt end upcurrent (direction and sense). Grooves: line only. Flames point up; load casts hang down.
  • Tidal: herringbone, flaser → wavy → lenticular, tidal bundles. Storm: HCS, SCS. Desiccation cracks (subaerial, V opening up) vs syneresis (subaqueous, spindle).
  • Ichnofacies landward to basinward: Scoyenia, Psilonichnus, Skolithos, Cruziana, Zoophycos, Nereites; substrate-controlled Glossifungites (firmground), Trypanites (hardground), Teredolites (wood).
  • Palaeocurrent vector mean: \( \bar{\theta} = \tan^{-1}(\sum\sin\theta_i/\sum\cos\theta_i) \); restore tilted beds first.

Facies, environments, basins

  • Facies = description (lithology, texture, structures, fossils, geometry); environment = interpretation. Walther’s law links the vertical order to lateral neighbours.
  • Fining-upward: meandering point bars, channels, tidal flats. Coarsening-upward: prograding deltas, shorefaces, fan lobes, alluvial fans.
  • Shoreface (prograding): offshore mud → offshore transition with HCS → lower and upper shoreface (trough cross-beds, Ophiomorpha) → foreshore (low-angle swash lamination) → backshore dunes.
  • Delta parts: delta plain, delta front (mouth bars), prodelta. Galloway: river (Mississippi), wave (São Francisco), tide (Ganges–Brahmaputra, Fly). Gilbert delta: topset, foreset, bottomset.
  • Carbonates are born, not made. Platforms: rimmed shelf, ramp, epeiric, isolated. Peritidal cycles shallow upward to laminites and evaporites.
  • Pelagic: calcareous ooze above the CCD; siliceous ooze under productive water; red clay below the CCD.
Plate settingBasinIndian example
Divergentrift; passive marginCambay rift; Mumbai offshore
Intraplateintracratonic riftGondwana grabens (Damodar, Son–Mahanadi, Pranhita–Godavari)
Convergentforearc; backarc; peripheral forelandAndaman forearc; Andaman Sea; Indo-Gangetic plain
Transformpull-apart(Dead Sea, classic)
$$\boxed{\tau = \frac{a^2}{\pi^2\kappa} \approx 63\ \text{Myr}} \qquad \text{fraction of thermal subsidence complete} = 1 - e^{-t/\tau}$$

Foreland depozones from the thrust front: wedge-top, foredeep, forebulge, back-bulge. Fill coarsens upward (flysch → molasse).

Diagenesis

  • Stages (Choquette and Pray, 1970): eogenesis, mesogenesis, telogenesis.
  • Redox ladder: O₂ → NO₃⁻ → Mn(IV) → Fe(III) → SO₄²⁻ → methanogenesis. Marine: pyrite; fresh water: siderite.
  • Burial: mechanical then chemical compaction, quartz cement (mainly above about 70–80 °C), smectite → illite, oil window about 60–120 °C. Chlorite rims inhibit quartz overgrowths.
$$\boxed{\phi(z) = \phi_0 e^{-cz}} \qquad \text{solid thickness between } z_1, z_2 = (z_2 - z_1) - \frac{\phi_0}{c}\left(e^{-cz_1} - e^{-cz_2}\right)$$
Carbonate diagenetic zoneCement
Marine phreaticfibrous, isopachous aragonite and high-Mg calcite
Meteoric vadosemeniscus and pendant
Meteoric phreaticequant blocky low-Mg calcite; moldic porosity
Burialpoikilotopic calcite, saddle dolomite, stylolites
  • Dolomitisation: \( 2\mathrm{CaCO_3} + \mathrm{Mg^{2+}} \rightarrow \mathrm{CaMg(CO_3)_2} + \mathrm{Ca^{2+}} \); about 13% solid volume loss mole for mole. Models: sabkha, seepage-reflux, mixing zone, burial, seawater.
  • Choquette–Pray porosity: fabric-selective (interparticle, intraparticle, moldic, fenestral…), not fabric-selective (fracture, vug, channel, cavern), either (breccia, burrow, boring, shrinkage).

Stratigraphic code, GSSP and correlation

  • Codes: International Stratigraphic Guide (1976, 1994); North American Stratigraphic Code (1983, amended). Separate properties, separate units.
  • Formal unit: name, stratotype, description, boundaries, publication. Stratotypes: holo-, para-, lecto-, neo-, hypo-; unit vs boundary stratotype.
  • Lithostratigraphy: Supergroup, Group, Formation (fundamental), Member, Bed or Flow. Boundaries often diachronous.
  • Unconformity-bounded: synthem (ISG); allostratigraphic units (NACSN).
  • Biozones: taxon-range, concurrent-range (overlap of two), interval (between two biohorizons), lineage, assemblage, abundance.
ChronostratigraphicEonothemErathemSystemSeriesStage
GeochronologicEonEraPeriodEpochAge

Rock terms take Lower/Upper; time terms take Early/Late.

  • GSSP: base of each stage; one point in one section; continuous deposition, primary marker (usually a FAD), secondary markers; ICS vote, IUGS Executive Committee ratifies. GSSA: chosen numerical age (most of the Precambrian).
GSSPPlaceMarker
Silurian–Devonian (first, 1972)Klonk, Czech RepublicMonograptus uniformis
Base CambrianFortune Head, NewfoundlandTreptichnus pedum
Base EdiacaranEnorama Creek, South Australiabase of Marinoan cap carbonate
Base TriassicMeishan, ChinaHindeodus parvus
Base PaleogeneEl Kef, Tunisiairidium anomaly
Base EoceneDababiya, Egyptonset of the carbon isotope excursion
Base HoloceneNGRIP2 ice coreend of Younger Dryas, 11,700 yr b2k
Base MeghalayanMawmluh Cave, Meghalaya4.2 ka event in a stalagmite
  • Correlation methods: lithology and key beds, biostratigraphy, graphic correlation (Shaw), radiometric ages, magnetostratigraphy (needs a tie-point), chemostratigraphy (δ¹³C, ⁸⁷Sr/⁸⁶Sr), event beds (ash, bentonite, tonstein), well logs, seismic reflections, cyclostratigraphy.
$$\boxed{\text{accumulation rate} = \frac{\Delta \text{thickness}}{\Delta \text{age}}} \quad \text{(compacted thickness underestimates the original rate)}$$

Walther’s law and sequence stratigraphy

  • Walther’s law (1894): facies superimposed without a break were laterally adjacent. Only in conformable successions; a sharp facies jump means a hidden surface.
  • Accommodation ≈ eustasy + subsidence. Transgression needs A > S; normal regression A < S with a rise; forced regression with a fall.
SurfaceRecognition
Sequence boundarysubaerial unconformity + correlative conformity; incised valleys, basinward facies shift
Transgressive surfacefirst major flooding after lowstand
Maximum flooding surfacecondensed section: glauconite, phosphate, fossil concentration, gamma-ray peak; downlap surface
Flooding surfacebounds a parasequence
Systems tractStageStacking
FSSTrelative falldownstepping, detached shorefaces
LSTlow, slow risebasin-floor and slope fans, lowstand wedge, valley fill
TSTrapid riseretrogradational; ends at the MFS
HSTlate slow riseaggradational then progradational; downlaps the MFS
  • Parasequence: shallowing-up package bounded by marine flooding surfaces. Gamma-ray shapes: funnel (coarsening-up, progradational), bell (fining-up), cylinder (aggradational).
  • Seismic terminations: onlap and downlap at the base; toplap and truncation at the top; offlap in forced regression.
  • Sequence models: depositional (SB), genetic (MFS, Galloway 1989), T–R (subaerial unconformity + maximum regression surface).
  • Eustasy + subsidence: with \( E = A\sin(2\pi t/P) \), maximum eustatic fall rate \( = 2\pi A/P \); relative sea level falls only if this exceeds the subsidence rate.

Earth’s climatic history

  • Controls: solar luminosity, palaeogeography, CO₂ (outgassing vs silicate weathering and burial), orbit, ocean circulation. Feedbacks: ice–albedo and water vapour (+), silicate weathering (−): \( \mathrm{CaSiO_3 + CO_2 \rightarrow CaCO_3 + SiO_2} \).
  • δ¹⁸O of forams: higher = colder and/or more ice; about 0.2–0.25‰ per °C. Separate the two with Mg/Ca or sea level.
$$\boxed{T = 16.9 - 4.38(\delta_c - \delta_w) + 0.10(\delta_c - \delta_w)^2} \qquad \boxed{\Delta\delta_w \approx \frac{\Delta \text{sea level}}{\text{mean ocean depth}} \times \lvert\delta_{\text{ice}}\rvert}$$$$\boxed{M_s(\delta_s - \delta_f) = M_r(\delta_f - \delta_r)} \quad \text{(carbon isotope mass balance)}$$
Glaciation or eventAgeEvidence
Huronianabout 2.4–2.2 Gatillites; linked to the GOE
Sturtian, Marinoan (Snowball)about 717–660 Ma; ends about 635 Malow-latitude tillites, cap carbonates, BIF return
Hirnantianabout 445 MaGondwana ice; end-Ordovician extinction
Late Paleozoic Ice AgeCarboniferous–PermianGondwana tillites (Talchir), cyclothems
OAE 2about 94 Mablack shales, positive δ¹³C
PETM56 Manegative δ¹³C, warming, acidification
Antarctic ice sheetabout 34 Maδ¹⁸O step at the Eocene–Oligocene transition
Northern Hemisphere iceabout 2.7 Maice-rafted debris
Mid-Pleistocene Transitionabout 1.2–0.7 Ma41 kyr → 100 kyr cycles
LGMabout 26–19 kasea level −120 to −130 m; CO₂ about 180–190 ppm
Younger Dryas12.9–11.7 kaits end is the base of the Holocene
  • Milankovitch: eccentricity about 100 and 405 kyr; obliquity 41 kyr (22.1–24.5°); precession 19–23 kyr. 65°N summer insolation; the 100-kyr problem needs feedbacks. MIS: odd warm, even cold.

Phanerozoic stratigraphy of India

ProvinceKey units
Lesser HimalayaKrol (Ediacaran) → Tal (Cambrian); Mussoorie phosphorite
SpitiHaimanta (Cambrian trilobites) → Muth Qtz → Lipak, Po → Kuling → Lilang → Kioto Lst → Spiti Shale → Giumal → Chikkim
KashmirSyringothyris Lst, Fenestella Shale, Agglomeratic Slate, Panjal Traps, Zewan, Khunamuh; Guryul Ravine P–T
Salt Range (Pakistan)Salt Range Fm, Khewra Sst, Tobra (glacial), Productus Lst
Lower GondwanaTalchir → Karharbari → Barakar → Barren Measures → Raniganj
Upper GondwanaPanchet (Lystrosaurus), Maleri (Hyperodapedon), Kota (Barapasaurus), Rajmahal and Jabalpur (Ptilophyllum)
Kutch JurassicPatcham → Chari → Katrol → Umia (Jhurio, Jumara, Jhuran, Bhuj)
JaisalmerLathi → Jaisalmer → Baisakhi → Bhadasar → Pariwar
Cauvery CretaceousUttatur → Trichinopoly → Ariyalur → Niniyur (Paleocene)
NarmadaBagh Beds (Nimar Sst, Nodular Lst, Coralline Lst); Lameta (Maastrichtian, dinosaurs)
Flood basaltsPanjal (Permian); Rajmahal–Sylhet (Early Cretaceous, Kerguelen); Deccan (about 66 Ma, Réunion)
Himalayan forelandSubathu (marine) → Dagshai → Kasauli → Lower, Middle, Upper Siwalik
AssamDisang → Jaintia → Barail (coal) → Surma → Tipam → Dupi Tila / Dihing
West and southCambay Shale (source), Bombay High (Miocene carbonates), Palana and Neyveli lignites, Quilon and Warkalli
QuaternaryBhabar, Terai, Bhangar (kankar), Khadar; Karewa; Thar; Mawmluh
  • Floras: Gangamopteris → Glossopteris (Permian) → Dicroidium (Triassic) → Ptilophyllum (Jurassic–Early Cretaceous).
  • Marine Permian bands in the Gondwana: Umaria, Manendragarh (Eurydesma).

Ten-question self-test

Original practice items, one line each. Answers below.

  1. A median of 0.35 mm: φ value and class?
  2. Framework 80% Q, 15% F, 5% R, 4% matrix: Folk name?
  3. Grain-supported limestone of ooids with lime mud between them: Dunham name?
  4. Froude number of a flow 1.0 m deep at 2.0 m/s (g = 9.8 m/s²)?
  5. Which Bouma division is ripple cross-laminated?
  6. Athy’s law with \( \phi_0 = 0.5 \), \( c = 0.4 \) km⁻¹: porosity at 2.5 km?
  7. Which systems tract downlaps onto the maximum flooding surface?
  8. Biozone between the FAD of taxon A and the FAD of taxon B?
  9. Orbital parameter with a 41 kyr period?
  10. Order Raniganj, Talchir, Barakar from oldest.
Answers
  1. \( -\log_2 0.35 = 1.51 \): medium sand. 2. Subarkose. 3. Packstone (Folk: oomicrite). 4. \( 2.0/\sqrt{9.8} = 0.64 \), subcritical. 5. Tc. 6. \( 0.5e^{-1.0} = 0.18 \). 7. Highstand systems tract. 8. Interval zone. 9. Obliquity. 10. Talchir, Barakar, Raniganj.

Where next

Advertisement
Advertisement