Skip to content

Stratigraphic Code, GSSP, Correlation and Sequence Stratigraphy

Stratigraphic code and units, stratotypes and GSSPs, litho-, bio- and chronostratigraphy, correlation methods, Walther's law and sequence stratigraphy.

  • 22 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: A Spike in a Chinese Hillside
  3. Stratigraphic Codes and Guides
  4. The Categories of Stratigraphic Units
  5. GSSP: Defining Boundaries with a Golden Spike
  6. Correlation
  7. Walther’s Law
  8. Sequence Stratigraphy
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: A Spike in a Chinese Hillside

Stratigraphic Codes and Guides

Formal stratigraphic nomenclature follows written rules:

  • The International Stratigraphic Guide (ISG), prepared by the International Subcommission on Stratigraphic Classification (ISSC) of the IUGS: first edition 1976 (edited by H. D. Hedberg), second edition 1994 (edited by A. Salvador). It is a guide, setting out principles rather than binding law.
  • The North American Stratigraphic Code (NACSN, 1983, with later amendments), more prescriptive, which adds unit categories that the ISG treats differently.

The core principle is separate categories for separate properties. A rock body can be classified by its lithology, its fossils, its age, its magnetic polarity or the unconformities that bound it, and these units need not coincide. Mixing them (for example, defining a formation by its fossils) is the classic error the codes are designed to prevent.

Rules for a formal unit

To be formal, a unit needs:

  1. A name: a geographic name + a rank or lithologic term (“Barakar Formation”, “Kioto Limestone”). The first letter of each word is capitalised in formal use.
  2. A stratotype or type section (or type locality for lithodemic units) where it is defined.
  3. A description of its characteristics and boundaries, with criteria to recognise them away from the type section.
  4. Its regional extent, age and correlation, where known.
  5. Publication in a recognised scientific medium. Priority generally goes to the first properly published name; names may be abandoned or revised.

Kinds of stratotype

TermMeaning
Unit stratotypeType section of a unit, between its upper and lower boundary stratotypes
Boundary stratotypeType section containing a specific point that defines a boundary
HolostratotypeThe original stratotype designated by the author
ParastratotypeSupplementary section used in the original definition
LectostratotypeStratotype chosen later when no holostratotype was designated
NeostratotypeNew stratotype chosen to replace a destroyed or inadequate one
Hypostratotype (reference section)Supplementary section, often in another region, to extend knowledge of the unit

The Categories of Stratigraphic Units

Lithostratigraphic units

Defined by observable lithology and stratigraphic position; independent of age.

RankNotes
SupergroupTwo or more associated groups
GroupTwo or more associated formations
FormationThe fundamental unit: lithologically distinctive and mappable at the surface or traceable in the subsurface; no thickness limit
MemberNamed part of a formation with distinctive lithology
Bed (or Flow for lavas)The smallest formal unit; distinctive key beds or marker beds are useful in correlation

Formation boundaries are commonly diachronous: a beach sandstone deposited by a transgressing sea gets younger landward. Lithodemic units (NACSN) classify intrusive and highly deformed or metamorphosed rocks that do not obey superposition: lithodeme, suite, supersuite, complex.

Unconformity-bounded and allostratigraphic units

  • Synthem (ISG): a body of rock bounded above and below by specified, significant discontinuities (unconformities).
  • Allostratigraphic units (NACSN): alloformation, allomember, allogroup, defined by bounding discontinuities, useful where lithologically similar deposits are stacked (glacial drifts, alluvial terraces).

Sequence-stratigraphic units (below) are related to these but are defined by genetic interpretation of sea-level change.

Biostratigraphic units (biozones)

Defined by fossil content. The basic unit is the biozone, bounded by biohorizons, most often the first appearance datum (FAD) or last appearance datum (LAD) of a taxon (also written FO/LO for first and last occurrence in a given section).

Biozone (ISG)Definition
Taxon-range zoneThe total known range of a single taxon
Concurrent-range zoneThe overlap of the ranges of two specified taxa
Interval zoneThe interval between two specified biohorizons (for example, FAD of A to FAD of B)
Lineage zone (consecutive-range zone)The part of an evolutionary lineage between the appearance of an ancestor and its descendant
Assemblage zoneCharacterised by an association of three or more taxa
Abundance (acme) zoneWhere a taxon is unusually abundant

The older Oppel zone (an assemblage defined by several overlapping ranges) is now generally treated as a kind of concurrent-range zone.

graph TD
    A["Fossil ranges
measured in a section"] --> B{"One taxon
or several?"} B -- One --> C["Taxon-range zone
(or abundance zone)"] B -- Two --> D{"Overlap of ranges
or gap between
events?"} D -- Overlap --> E["Concurrent-range zone"] D -- Between events --> F["Interval zone"] B -- "Ancestor to
descendant" --> G["Lineage zone"] B -- "Three or more
characteristic taxa" --> H["Assemblage zone"]

A good index (zone) fossil evolved rapidly (short vertical range), was geographically widespread (ideally planktonic or nektonic), was independent of facies, was abundant, and is easy to identify and well preserved.

GroupMain use
TrilobitesCambrian
GraptolitesOrdovician–Silurian (pelagic black shales)
ConodontsCambrian–Triassic (many GSSPs)
AmmonoidsDevonian–Cretaceous (the finest Mesozoic zonation)
Fusulinid foramsCarboniferous–Permian
Planktonic foraminifera, calcareous nannofossilsJurassic/Cretaceous–Recent
Radiolarians, diatomsSiliceous deep-sea sediments
Pollen and spores (palynology)Non-marine sequences such as the Gondwana coals

Chronostratigraphic and geochronologic units

Chronostratigraphic units are bodies of rock formed during a specified interval of time; geochronologic units are the intervals of time themselves.

Chronostratigraphic (rock)Geochronologic (time)
EonothemEon
ErathemEra
SystemPeriod
SeriesEpoch
Stage (the basic working unit)Age
SubstageSubage

Chronozones are non-hierarchical units based on the time span of some other unit (for example, the time span of a biozone). Rock terms take Lower/Middle/Upper; time terms take Early/Middle/Late.

Geochronometric units are defined directly in years, with no reference section. This is how most of the Precambrian is divided: boundaries are Global Standard Stratigraphic Ages (GSSAs), chosen numbers such as 2,500 Ma for the Archean–Proterozoic boundary. Precambrian boundaries are gradually being redefined by GSSPs (the Ediacaran base already is).

Other categories

  • Magnetostratigraphy: polarity zones (normal or reversed) in rocks; the corresponding time intervals are polarity chrons and subchrons. Matching a section’s polarity pattern to the geomagnetic polarity time scale gives ages; see Paleomagnetism, Seafloor Spreading and Plate Tectonics.
  • Chemostratigraphy: secular variations in δ¹³C, δ¹⁸O, ⁸⁷Sr/⁸⁶Sr and other signals. Seawater ⁸⁷Sr/⁸⁶Sr is uniform across the oceans at any time (Sr residence time far exceeds ocean mixing time), so a carbonate’s Sr isotope ratio can be matched to the global curve for an age.
  • Cyclostratigraphy: rhythmic beds paced by Milankovitch orbital cycles, used to build astrochronologies with resolution of tens of thousands of years (see Earth’s Climatic History).
  • Event stratigraphy: geologically instantaneous layers (volcanic ash, impact ejecta, tempestites, turbidites, anoxic events).

GSSP: Defining Boundaries with a Golden Spike

The base of each stage is defined by a Global Boundary Stratotype Section and Point (GSSP): a single point in a single rock section, marked in the field (the “golden spike”). Boundaries are defined at the base of units: the top of a stage is defined by the base of the next one, so there are no gaps or overlaps.

Procedure. A working group proposes a candidate; the relevant subcommission of the International Commission on Stratigraphy (ICS) votes, then ICS as a whole; the decision is ratified by the IUGS Executive Committee.

Requirements for a GSSP section:

  1. Continuous deposition across the boundary (no hiatus, condensation or facies change at the level).
  2. Sufficient thickness above and below.
  3. Free of significant metamorphism, strong deformation and diagenetic overprint.
  4. Abundant, diverse, well-preserved fossils, with a primary marker (usually the FAD of a species) at the point.
  5. Suitable for secondary markers: magnetostratigraphy, chemostratigraphy, radiometric dating.
  6. Accessible, with provisions for permanent protection and free study.
GSSPLocationPrimary marker
Silurian–Devonian (the first GSSP, 1972)Klonk, Czech RepublicFAD of the graptolite Monograptus uniformis
Base of Cambrian (Phanerozoic)Fortune Head, Newfoundland, CanadaFAD of the trace fossil Treptichnus pedum
Base of EdiacaranEnorama Creek, Flinders Ranges, South AustraliaBase of the cap carbonate above Marinoan glacial deposits
Base of Triassic (Permian–Triassic)Meishan, Zhejiang, ChinaFAD of the conodont Hindeodus parvus
Base of Paleogene (K–Pg)El Kef, TunisiaIridium anomaly and associated extinction level
Base of EoceneDababiya, EgyptOnset of the Paleocene–Eocene carbon isotope excursion
Base of Quaternary (Gelasian)Monte San Nicola, Sicily, ItalyNear the Gauss–Matuyama polarity reversal, about 2.58 Ma
Base of HoloceneNGRIP2 ice core, GreenlandClimatic and chemical markers of the end of the Younger Dryas, 11,700 years b2k
Base of Meghalayan StageMawmluh Cave, Meghalaya, IndiaIsotopic shift in a stalagmite marking the 4.2 ka event

Note that two GSSPs (base Holocene, base Meghalayan) are in ice cores or cave deposits, not outcrops, and several are defined by physical or chemical events rather than fossils.

Correlation

Correlation demonstrates equivalence between separated units. Always state which kind: lithocorrelation (same rock unit), biocorrelation (same fossils), or chronocorrelation (same age). The three need not agree, because rock units are often diachronous.

MethodBasisStrengths and limits
Physical tracing and lithologyWalking out beds; key beds; similarity of sequencesDirect, but only over short distances; lithologies are diachronous
BiostratigraphyFADs, LADs, biozonesThe workhorse for Phanerozoic marine rocks; limited by facies control, migration delays, reworking, preservation
Graphic correlation (Shaw)Plotting FADs and LADs of many taxa in two sections against each other; the line of correlation gives relative ratesUses all taxa together; reveals hiatuses (doglegs) and rate changes
Radiometric datingU–Pb on ash zircons, Ar–Ar on sanidineAbsolute ages; needs datable horizons
MagnetostratigraphyPolarity reversal patternGlobal, synchronous boundaries; needs an independent tie-point because reversals are binary
Chemostratigraphyδ¹³C excursions, ⁸⁷Sr/⁸⁶Sr, δ¹⁸OGlobal signals; diagenesis can overprint
Event bedsVolcanic ash (tephrochronology), impact ejecta, bentonitesNear-instantaneous, widespread
Well logsGamma ray, spontaneous potential, resistivity, sonicContinuous subsurface data; pattern matching between wells
Seismic stratigraphyReflection geometryBasin-scale; reflections approximate time lines (chronostratigraphic surfaces)
CyclostratigraphyOrbital cycles in bedsHigh resolution once anchored

Walther’s Law

Johannes Walther (1894): in a conformable vertical succession, only those facies (and facies areas) that can be observed beside each other at the present time can be superimposed primarily, without a break. In simpler words: facies that lie vertically on top of each other without a break were laterally adjacent at the time of deposition.

Consequences and limits:

  • A shoreface succession of offshore mud → shoreface sand → foreshore → backshore means those belts sat side by side and the shoreline moved seaward (progradation, regression).
  • The law applies only within conformable successions. Across an unconformity, a ravinement surface, an erosive channel base or a sequence boundary, facies that were never neighbours can be stacked directly (for example, fluvial sandstone cut down into offshore mudstone after a fall in sea level).
  • A sharp, unexpected facies jump (a “facies dislocation”) is therefore a clue to a hidden surface, and is exactly what sequence stratigraphy looks for.

Sequence Stratigraphy

Accommodation and relative sea level

Accommodation is the space available for sediment to fill, up to base level (sea level in marine settings). It changes with eustasy (global sea level, driven by ice volume, ocean-basin volume) and tectonic subsidence or uplift (plus compaction):

$$\Delta(\text{accommodation}) \approx \Delta(\text{eustatic sea level}) + \text{subsidence}$$

The combined effect is relative sea level. Shoreline behaviour depends on the balance between the rate of creation of accommodation (A) and the rate of sediment supply (S):

ConditionShorelineStacking
A > S (relative sea level rising fast)TransgressionRetrogradational (back-stepping)
A ≈ SStationaryAggradational
A < S, relative sea level still risingNormal regressionProgradational (with aggradation)
Relative sea level fallingForced regressionProgradational and downstepping; subaerial erosion landward

Key surfaces

SurfaceMeaning and recognition
Sequence boundary (SB)Subaerial unconformity formed during relative sea-level fall, with its correlative conformity basinward; incised valleys, palaeosols, abrupt basinward shift of facies
Transgressive surface (TS) (maximum regression surface)First significant flooding after the lowstand; marks the change from progradation to retrogradation
Ravinement surfaceErosion by shoreface waves as the shoreline transgresses
Maximum flooding surface (MFS)Surface of maximum landward shoreline position; condensed section with slow sedimentation: glauconite, phosphate, ammonoid concentrations, high gamma-ray shales; a downlap surface for the overlying highstand
Regressive surface of marine erosionWave erosion on the shelf as sea level falls (forced regression)
Flooding surface (FS)Abrupt deepening that bounds a parasequence

Systems tracts

Within a depositional sequence, systems tracts are linked depositional systems formed during a particular stage of the relative sea-level cycle:

Systems tractStageTypical deposits
Falling-stage (FSST) (forced regressive wedge)Relative sea-level fallDetached, downstepping shoreface sands; basin-floor fans begin
Lowstand (LST)Low and slowly risingBasin-floor fans, slope fans, prograding lowstand wedge; incised valleys fill
Transgressive (TST)Rapid riseRetrogradational parasequences, estuaries, transgressive lags; ends at the MFS
Highstand (HST)Late rise, slow rise and stillstandAggradational then progradational parasequences; downlap onto the MFS; deltas build out

Parasequences and stacking patterns

A parasequence (Van Wagoner and co-workers) is a relatively conformable succession of genetically related beds bounded by marine flooding surfaces, typically shallowing-upward (a single coarsening-up shoreface package capped by a flooding surface). Parasequence sets stack in three patterns that track the A/S balance: progradational, aggradational, retrogradational.

On gamma-ray logs: a funnel (cleaning-upward) shape is a coarsening-up progradational package; a bell (dirtying-upward) shape is a fining-up channel or transgressive package; a cylinder (blocky) shape is aggradational sand.

Seismic stratigraphy

The method began with Vail and co-workers at Exxon (published 1977), who showed that seismic reflections follow bedding surfaces, which are approximately time lines. Reflection terminations define sequence boundaries:

TerminationWhereMeaning
OnlapAt the base, against an inclined surfaceInitially horizontal strata lapping onto a slope (transgression, basin fill)
DownlapAt the base, inclined strata onto a horizontal surfaceProgradation (clinoforms downlapping onto an MFS)
ToplapAt the topNon-deposition at base level; progradation without aggradation
TruncationAt the topErosion (unconformity)
OfflapProgressive basinward shift of the updip terminations (forced regression)

Sequence models and hierarchy

Three schools place the sequence boundary differently:

ModelBounding surface
Depositional sequence (Exxon)Subaerial unconformity and its correlative conformity
Genetic stratigraphic sequence (Galloway, 1989)Maximum flooding surfaces
Transgressive–regressive (T–R) sequence (Embry)Subaerial unconformity plus maximum regression surface

Cycles of relative sea-level change are commonly grouped into orders by duration: first order (tens to hundreds of Myr, supercontinent cycles), second order (millions to tens of millions of years), third order (roughly 0.5–3 Myr, the classic depositional sequence), and fourth and fifth orders (tens to hundreds of thousands of years, often orbitally driven parasequences). The exact limits vary between authors.

graph LR
    A["Sea level falls
FSST; SB cut"] --> B["Lowstand
LST: fans, incised
valleys fill"] B --> C["Rapid rise
TST: retrogradation;
ends at MFS"] C --> D["Slow rise
HST: aggradation
then progradation"] D --> A

Memory Tricks

Don’t Confuse

PairDifference
Lithostratigraphic vs chronostratigraphic unitRock type, often diachronous vs all rock formed in a time interval, bounded by isochronous surfaces
Chronostratigraphic vs geochronologicRock (System, Stage) vs time (Period, Age)
GSSP vs GSSAPhysical point in a section vs a chosen numerical age (Precambrian)
Holostratotype vs neostratotypeOriginal vs replacement stratotype
Taxon-range vs concurrent-range zoneOne taxon’s full range vs overlap of two ranges
FAD vs FOGlobal first appearance (datum) vs first occurrence in a particular section
Synthem vs sequenceUnconformity-bounded unit (descriptive) vs genetic unit tied to relative sea-level cycle
Transgression vs relative sea-level riseLandward shoreline shift (needs A > S) vs increase in accommodation; normal regression can happen during a rise
Normal vs forced regressionSupply outpaces rising accommodation vs driven by falling sea level
Flooding surface vs maximum flooding surfaceBounds any parasequence vs marks maximum transgression in a sequence
Onlap vs downlapHorizontal strata ending against a slope vs inclined strata ending on a flat surface
Eustatic vs relative sea levelGlobal ocean surface vs sea level relative to a local datum (eustasy + tectonics)

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. What is the fundamental unit of lithostratigraphy?
  2. Which body ratifies a GSSP after the ICS vote?
  3. Which systems tract ends at the maximum flooding surface?
Answers
  1. The Formation.
  2. The IUGS Executive Committee.
  3. The transgressive systems tract.

Level 2: Part B Style

Q1 (practice). A biozone defined as the stratigraphic interval in which the ranges of two specified taxa overlap is a:

  • (a) taxon-range zone
  • (b) concurrent-range zone
  • (c) interval zone
  • (d) abundance zone
Answer and explanation

(b). An interval zone lies between two biohorizons (not necessarily an overlap); a taxon-range zone is the range of one taxon; an abundance zone depends on relative numbers.

Q2 (practice). Which pairing of chronostratigraphic and geochronologic units is correct?

  • (a) System – Epoch
  • (b) Stage – Age
  • (c) Series – Period
  • (d) Erathem – Eon
Answer and explanation

(b). The pairs are Eonothem–Eon, Erathem–Era, System–Period, Series–Epoch, Stage–Age.

Q3 (practice). On a seismic section, inclined clinoform reflections terminate downward against an underlying, nearly horizontal reflection. The termination and the likely nature of the underlying surface are:

  • (a) onlap; sequence boundary
  • (b) downlap; maximum flooding surface
  • (c) toplap; transgressive surface
  • (d) truncation; correlative conformity
Answer and explanation

(b). Inclined strata ending downward on a flatter surface show downlap, the signature of progradation over a condensed maximum flooding surface (highstand clinoforms downlapping the MFS).

Q4 (practice). Walther’s law cannot be applied to which of the following contacts?

  • (a) Gradational contact between prodelta mud and delta-front sand
  • (b) Gradational contact between lower and upper shoreface sand
  • (c) An incised-valley fluvial conglomerate resting sharply on offshore marine shale
  • (d) Gradational contact between tidal-flat mud and supratidal sabkha
Answer and explanation

(c). The sharp, erosive base of an incised valley is a sequence boundary: fluvial gravel and offshore mud were never neighbours. The other contacts are conformable transitions between adjacent environments.

Level 3: Part C Style

Q1 (practice). On a passive margin, eustatic sea level varies sinusoidally with amplitude 30 m and period 1.0 Myr. Tectonic subsidence at the shelf edge is a constant 100 m/Myr.

(i) What is the maximum rate of eustatic fall? (ii) Does relative sea level fall at the shelf edge? If so, for how long in each cycle? (iii) What would change if subsidence were 200 m/Myr?

Answer and worked solution

Let \( E = 30\sin(2\pi t/P) \). Then \( dE/dt = 30 \times 2\pi\cos(2\pi t/P) \) m/Myr.

  1. Maximum rate of fall = \( 30 \times 2\pi = 188.5 \) m/Myr.
  2. Relative sea-level change rate = \( 100 + 188.5\cos\omega t \). It is negative when \( \cos\omega t < -100/188.5 = -0.531 \), that is for \( \omega t \) between 2.130 and 4.153 rad, an interval of 2.023 rad. Fraction of the cycle = \( 2.023/2\pi = 0.322 \), so relative sea level falls for about 320 kyr of every 1 Myr cycle. A falling stage at the shelf edge allows a subaerial unconformity (sequence boundary) to form across the shelf, with forced-regressive and lowstand deposits basinward.
  3. With 200 m/Myr subsidence, 200 > 188.5, so relative sea level never falls; it only rises more slowly at times. Shorelines may still regress (normal regression) when supply outpaces accommodation, but no subaerial unconformity forms at the shelf edge. The same eustatic signal can therefore leave very different records on fast- and slow-subsiding margins.

Q2 (practice). In a shelf succession a geologist logs, from base to top: (1) four stacked coarsening-upward shoreface parasequences, each thinner and more offshore than the one below, separated by flooding surfaces; (2) a 2 m glauconitic, phosphatic shale with abundant ammonites and the highest gamma-ray reading of the section; (3) three coarsening-upward parasequences, each shallower than the one below, the uppermost ending in a rooted coal. Which statements are correct?

  • A. Unit 1 is a retrogradational parasequence set of the transgressive systems tract.

  • B. Unit 2 contains the maximum flooding surface and is a condensed section.

  • C. Unit 3 is a progradational parasequence set of the highstand systems tract.

  • D. The base of unit 2 is the sequence boundary.

  • (a) A, B and C only

  • (b) B and D only

  • (c) A and D only

  • (d) A, B, C and D

Answer and explanation

(a) A, B and C.

  • A: back-stepping (each parasequence deeper) = retrogradational = TST.
  • B: glauconite, phosphate, fossil concentration and peak gamma ray record starved, slow sedimentation at maximum transgression: the condensed section containing the MFS.
  • C: forward-stepping (each shallower) = progradational = HST.
  • D: wrong. The sequence boundary is a subaerial unconformity formed by relative sea-level fall, not the deepest-water interval. It would lie above unit 3 (or below unit 1).

Q3 (practice). Range data for five taxa in two sections, P and Q, are below (metres above the base of each section).

TaxonP: FOP: LOQ: FOQ: LO
A1060530
B30901545
C501202560
D701403570
E1001505075

(i) Do the events in P and Q fall on a single straight line of correlation? (ii) What is the ratio of accumulation rates between P and Q? (iii) Name the zone defined by the overlap of B and C, and give its thickness in each section.

Answer and worked solution
  1. Plot each event as (Q height, P height): A FO (5, 10), A LO (30, 60), B FO (15, 30), B LO (45, 90), C FO (25, 50), C LO (60, 120), D FO (35, 70), D LO (70, 140), E FO (50, 100), E LO (75, 150). Every point satisfies P = 2Q: a single straight line of correlation through the origin, so there is no hiatus or rate change in either section.
  2. The slope is 2: P accumulated twice as fast as Q (or Q is condensed, for example by compaction or slower supply).
  3. The overlap of B and C is a concurrent-range zone: from FO of C to LO of B. In P: 50 to 90 m = 40 m; in Q: 25 to 45 m = 20 m, consistent with the 2 : 1 ratio.

This is graphic correlation: a dogleg in the line would indicate a hiatus or a change in rate in one section.


Quick Revision Table

TopicKey fact
CodesInternational Stratigraphic Guide (1976, 1994); North American Stratigraphic Code (1983 and amendments)
Formal unit needsName, stratotype, description, boundaries, publication
StratotypesHolo-, para-, lecto-, neo-, hypostratotype; unit vs boundary stratotype
LithostratigraphySupergroup, Group, Formation, Member, Bed/Flow; diachronous
Unconformity-boundedSynthem (ISG); allostratigraphic units (NACSN)
BiozonesTaxon-range, concurrent-range, interval, lineage, assemblage, abundance
Chrono vs geochronEonothem/Eon, Erathem/Era, System/Period, Series/Epoch, Stage/Age
GSSPBase of stage; ICS vote, IUGS ratification; continuous section, primary marker
First GSSPSilurian–Devonian, Klonk (1972)
Key GSSPsCambrian: Fortune Head (T. pedum); Triassic: Meishan (H. parvus); Paleogene: El Kef (iridium); Holocene: NGRIP2; Meghalayan: Mawmluh Cave
GSSANumerical boundary (Precambrian)
CorrelationLitho-, bio-, chrono-; graphic, radiometric, magneto-, chemo- (δ¹³C, ⁸⁷Sr/⁸⁶Sr), event beds, logs, seismic, cyclostratigraphy
Walther’s lawVertically adjacent = laterally adjacent, only in conformable successions
AccommodationEustasy + subsidence; A/S controls transgression vs regression
SurfacesSB, TS, ravinement, MFS (condensed, downlap), flooding surface
Systems tractsFSST, LST, TST, HST
ParasequenceShallowing-up, bounded by flooding surfaces; pro-, aggra-, retrogradational sets
TerminationsOnlap, downlap (base); toplap, truncation (top); offlap
Sequence modelsDepositional (SB), genetic (MFS), T–R

Key Takeaways

What’s Next

Advertisement
Advertisement