Structural Geology and Geotectonics
CSIR NET Part C Geology: stress, Mohr circle, fracturing, strain analysis, shear zones, folds, tectonic regimes, plumes, Himalaya and supercontinents.
- 6
- Topics
- 116
- Min read
- 01 Stress, Mohr Circle, Failure Criteria and Fault ReactivationStart here CSIR NET Geology Part C: stress tensor, 2D and 3D Mohr circles, Coulomb and Griffith criteria, effective stress, fracture modes, reactivation and slip tendency.
- 02 Strain Ellipsoid, Tectonic Fabrics and Strain Analysis CSIR NET Geology Part C: strain measures, pure and simple shear, vorticity, Flinn and Lode parameters, S-L tectonites, Rf/phi, Fry and Wellman strain analysis.
- 03 Deformation Mechanisms and Shear Zones CSIR NET Geology Part C: cataclasis, pressure solution, dislocation and diffusion creep, recrystallisation, flow laws, fault rocks, mylonites, shear senses.
- 04 Folds, Boudins, Foliations, Lineations and Superposed Folding CSIR NET Geology Part C: fold geometry and Ramsay classes, buckling and Biot wavelength, boudinage, cleavage and lineation types, superposed-fold interference.
- 05 Extensional, Compressional and Strike-Slip Terrains; Mantle Plumes CSIR NET Geology Part C: rifts and stretching, thrust systems, duplexes, critical taper, Riedel shears, flower structures, inversion, mantle plumes and LIPs.
- 06 Himalayan Orogeny and Supercontinents CSIR NET Geology Part C: India-Asia collision, Himalayan units and thrusts, inverted metamorphism, channel flow, Tibet; Wilson cycle, Rodinia, Gondwana, Pangea.
- Structural Geology and Geotectonics Short Notes Revise The whole chapter on one page.
Chapter Overview
Structural Geology and Geotectonics is a unit of the Geology section of Part C in CSIR NET Earth, Atmospheric, Ocean and Planetary Sciences (subject code 702). It takes the Part B basics of stress, strain, folds and faults to MSc depth. It covers the mechanics of fracture and fault reactivation, the quantitative description of strain and fabrics, the grain-scale mechanisms of deformation and the shear zones they build, the geometry of folds and their interference, and then the large scale: rifts, thrust belts, strike-slip systems, mantle plumes, the Himalaya and supercontinents.
Part C questions here are of three kinds: short calculations (Mohr circle, Coulomb failure, simple shear, Flinn \( k \), stretching factor, Biot wavelength); interpretation of described data (microstructures, fabrics, maps, stereonets); and statement questions that test exact distinctions (thrust versus normal sense on the STDS, Coulomb versus Byerlee, BLG versus GBM).
What You’ll Learn
By the end of this chapter you will be able to:
- Resolve stresses on any plane with the Mohr circle and apply Griffith, Coulomb and Byerlee criteria with pore pressure
- Decide whether an existing fault reactivates or a new one forms, using Sibson’s analysis and slip tendency
- Describe finite strain with stretches, simple and pure shear, vorticity, the Flinn and Lode parameters, and measure it with Rf/\( \phi \), Fry and Wellman methods
- Match microstructures to deformation mechanisms and temperatures, and read shear sense in mylonites
- Classify folds, boudins, foliations and lineations, and recognise superposed fold interference patterns
- Recognise extensional, compressional and strike-slip structures, and the signatures of mantle plumes
- Explain the Himalayan orogeny unit by unit, and place India in Columbia, Rodinia, Gondwana and Pangea
Prerequisites
- The Part B unit pages Stress, Strain, Folds, Joints and Faults and Seismology Basics and Earth’s Internal Structure
- Isostasy, palaeomagnetism and heat flow from Gravity, Geomagnetism, Heat Flow and Isostasy
- Matrix and eigenvalue basics, revised in Linear Algebra, Matrices and Eigenvalues
- MSc-level field geology: stereonet plotting, way-up criteria, metamorphic facies
Learning Path
The topics follow the order of the official syllabus lines, from the mechanics of a point to the tectonics of a planet:
graph TD
A["1. Stress, Mohr Circle,
Failure Criteria and
Fault Reactivation"] --> B["2. Strain Ellipsoid,
Tectonic Fabrics and
Strain Analysis"]
B --> C["3. Deformation Mechanisms
and Shear Zones"]
B --> D["4. Folds, Boudins,
Foliations, Lineations,
Superposed Folding"]
C --> D
A --> E["5. Extensional, Compressional,
Strike-Slip Terrains;
Mantle Plumes"]
D --> E
E --> F["6. Himalayan Orogeny
and Supercontinents"]
F --> G["Quick Revision"]Topics in This Chapter
| # | Topic | What it covers | Time |
|---|---|---|---|
| 1 | Stress, Mohr Circle, Failure Criteria and Fault Reactivation | stress tensor, 2D and 3D Mohr circles, Griffith and fracture mechanics, Coulomb, Griffith–Coulomb envelope, Byerlee’s law, effective stress, joints and veins, Sibson reactivation, slip and dilation tendency, fault-valve, stress indicators | 30 min |
| 2 | Strain Ellipsoid, Tectonic Fabrics and Strain Analysis | strain measures, homogeneous strain, pure and simple shear, vorticity, Flinn and Lode, S-, L- and L-S tectonites, fabric symmetry, Rf/\( \phi \), Fry, Wellman, Breddin | 30 min |
| 3 | Deformation Mechanisms and Shear Zones | cataclasis, pressure solution, dislocation creep, BLG/SGR/GBM, diffusion creep, flow laws, fault rocks, mylonites, \( \gamma \) from foliation, kinematic indicators | 30 min |
| 4 | Folds, Boudins, Foliations, Lineations and Superposed Folding | Fleuty and Ramsay classifications, π-diagrams, Biot buckling, fold mechanisms, sheath folds, boudin types, cleavage and lineation types, bedding–cleavage rules, interference Types 0–3 | 30 min |
| 5 | Extensional, Compressional and Strike-Slip Terrains; Mantle Plumes | rift geometry and \( \beta \), McKenzie and Wernicke models, thrust rules, duplexes, balancing, critical taper, Riedel shears, step-overs, flowers, transforms, inversion, plumes and LIPs | 30 min |
| 6 | Himalayan Orogeny and Supercontinents | India–Asia collision, units and thrusts, STDS, inverted metamorphism, channel flow, Tibet, UHP rocks; Wilson cycle, Kenorland to Pangea, India in supercontinents | 30 min |
| — | Quick Revision | every formula, classification and trap on one page | 15 min |
Official syllabus lines and where they are covered
| Official topic line | Covered in |
|---|---|
| Stress, strain, Mohr circle, failure criteria | Topic 1 (stress, Mohr circle, failure criteria); Topic 2 (strain) |
| Fracturing and reactivation | Topic 1 (fracture modes, joints, veins, hydraulic fracturing, Sibson reactivation, slip tendency, inversion link) |
| Strain ellipsoids, tectonic fabrics, strain analysis | Topic 2 |
| Deformation mechanisms, shear zones | Topic 3 |
| Folds, boudins, foliations, lineations, superposed folding | Topic 4 |
| Extensional, compressional and strike-slip terrains; mantle plumes | Topic 5 |
| Himalayan orogeny; supercontinents | Topic 6 |
How CSIR NET Asks It
Per the NTA information bulletin for December 2026, Earth Sciences Part C has 80 questions, of which 25 are to be attempted, at 4 marks each with −1.32 for a wrong answer (33% negative marking, against 25% in Part B; full table on the Earth Sciences overview). Part C is split by discipline, and this unit sits in the Geology section. There is no official count of questions per unit. From the syllabus wording and the style of the subject, expect:
| Question type | Typical content | Where to practise |
|---|---|---|
| One-step numerical | \( \sigma_n \) and \( \tau \) on a plane; Coulomb \( \sigma_1 \) at failure; \( \gamma \) from foliation angle; Flinn \( k \); \( \beta \) from domino faults; hotspot rate | Level 2 on each page |
| Multi-step numerical | reactivation versus new fault; slip tendency for a set of faults; ellipsoid from three sections; displacement across a shear-zone profile; palaeolatitude and drift rate | Level 3 |
| Data or description interpretation | microstructures to temperature; interference pattern from a map; bedding–cleavage relations; inverted metamorphism | Level 3 |
| Statement evaluation | Byerlee and clay gouge; boudin neck orientation; plume signatures; STDS sense; supercontinent orogens | Level 3 |
Quick Reference
| Quantity | Value or formula |
|---|---|
| Coulomb fracture angle | \( 45° - \phi/2 \) to \( \sigma_1 \); about 30° for \( \mu = 0.6 \) |
| Byerlee | \( \tau = 0.85\sigma_n \) (< 200 MPa); \( 50 + 0.6\sigma_n \) MPa above |
| Reactivation lock-up | about 59° to \( \sigma_1 \) for \( \mu_s = 0.6 \) |
| Simple shear | \( \tan 2\theta' = 2/\gamma \) |
| Flinn | \( k = (a-1)/(b-1) \) |
| Flow law | \( \dot{\varepsilon} = A\sigma^n d^{-m}e^{-Q/RT} \) |
| Biot wavelength | \( L_d = 2\pi t(\mu_L/6\mu_M)^{1/3} \) |
| Domino stretching | \( \beta = \sin\theta_0/\sin\theta \) |
| Himalayan faults S to N | MFT, MBT, MCT, STDS (normal), ITSZ |
| Supercontinents | Columbia about 1.8–1.5 Ga; Rodinia about 1.0 Ga; Gondwana from about 0.55 Ga; Pangea about 0.32–0.18 Ga |
Start Learning
Begin with the first topic:
→ Stress, Mohr Circle, Failure Criteria and Fault Reactivation