Skip to content

Folds, Boudins, Foliations, Lineations and Superposed Folding

CSIR NET Geology Part C: fold geometry and Ramsay classes, buckling and Biot wavelength, boudinage, cleavage and lineation types, superposed-fold interference.

  • 18 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: A Mushroom in the Outcrop
  3. Fold Geometry
  4. How Folds Form
  5. Boudinage
  6. Foliations
  7. Lineations
  8. Superposed Folding
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: A Mushroom in the Outcrop

Fold Geometry

Descriptive terms

TermMeaning
Hinge lineline of maximum curvature on a folded surface
Axial surfacesurface containing the hinge lines of successive layers
Fold axisfor a cylindrical fold, the line which, moved parallel to itself, generates the folded surface; parallel to the hinge line
Antiform / synformcloses upward / downward, regardless of age of layers
Anticline / synclineolder / younger rocks in the core (needs way-up evidence)
Facingdirection, along the axial surface and normal to the hinge, in which beds young
Vergencethe sense of asymmetry of a fold (the direction its upper part leans)
Parasitic foldssmall folds on the limbs of a larger fold; S, Z and M shapes (looking down the plunge)

Parasitic folds are Z-shaped on one limb, S-shaped on the other, M-shaped (symmetric) at the hinge. Their vergence points towards the hinge of the larger antiform. This is a standard tool for locating major fold hinges in poorly exposed ground.

A synformal anticline (older rocks in the core of a downward-closing fold) or an antiformal syncline means the sequence is inverted, usually by earlier recumbent folding.

Classification by interlimb angle (Fleuty)

Interlimb angleName
180–120°gentle
120–70°open
70–30°close
30° to just above 0°tight
0°isoclinal
negative (limbs diverge past parallel)elastica (fan-shaped)

Classification by orientation (Fleuty)

Using dip of the axial surface and plunge of the hinge line:

Dip of axial surfaceNamePlunge of hingeName
80–90°upright0–10°horizontal
60–80°steeply inclined10–30°gently plunging
30–60°moderately inclined30–60°moderately plunging
10–30°gently inclined60–80°steeply plunging
0–10°recumbent80–90°vertical

A reclined fold has a hinge plunging down the dip of an inclined axial surface. Overturned folds have one limb rotated past vertical. A monocline has one steep limb in otherwise flat-lying beds.

Ramsay’s classification by dip isogons

Dip isogons join points of equal dip on the outer and inner arcs of a folded layer. Two thickness ratios are used, at limb dip \( \alpha \):

  • \( t'_\alpha = t_\alpha/t_0 \): orthogonal thickness relative to the hinge;
  • \( T'_\alpha = T_\alpha/T_0 \): thickness parallel to the axial surface relative to the hinge; \( T'_\alpha = t'_\alpha/\cos\alpha \).
ClassDip isogons\( t'_\alpha \)Example
1Astrongly convergent (towards the core)\( > 1 \)thinned hinge, thick limbs
1B (parallel)convergent, normal to layers\( = 1 \)concentric folds of competent layers
1Cweakly convergentbetween \( \cos\alpha \) and 1flattened parallel folds
2 (similar)parallel to each other\( = \cos\alpha \) (\( T'_\alpha = 1 \))passive folds, slaty rocks
3divergent\( < \cos\alpha \)incompetent layers between competent ones

Competent layers tend to form class 1B–1C folds; incompetent layers between them form class 3 folds. Alternating layers together give an overall class 2 pattern.

Analysing folds on a stereonet

  • In a π-diagram, poles to bedding from a cylindrical fold fall on a great circle (the π-circle). The pole to that great circle is the fold axis.
  • In a β-diagram, great circles of bedding intersect at the fold axis (β).
  • The axial plane contains the fold axis and bisects the limbs (for symmetric folds).
  • Poles scattered on a small circle or with no clear girdle point to a non-cylindrical or refolded fold.

How Folds Form

Buckling and the dominant wavelength

A competent layer of viscosity \( \mu_L \) embedded in a weaker matrix of viscosity \( \mu_M \), shortened parallel to its length, buckles. M. A. Biot and H. Ramberg showed that one wavelength grows fastest, the dominant wavelength:

$$\boxed{L_d = 2\pi t\left(\frac{\mu_L}{6\mu_M}\right)^{1/3}}$$

where \( t \) is the layer thickness. Two points follow:

  • \( L_d/t \) depends only on the viscosity contrast, so thick layers make large folds and thin layers small ones. That is why fold wavelength scales with layer thickness in the field.
  • A large contrast (over about 100) gives clear buckle folds; a small contrast gives layer-parallel thickening with only low-amplitude folds.

Strain within a buckled layer

MechanismDescriptionResulting fold
Flexural sliplayers slide past one another along bedding, like bending a deck of cardsparallel (1B); slickensides on bedding perpendicular to the hinge
Flexural flowshear distributed within incompetent layers1B–1C
Tangential longitudinal strainouter arc extended, inner arc shortened, separated by a neutral surface1B; outer-arc extension veins and normal faults, inner-arc thrusts and cleavage
Passive (similar) foldinglayering is a passive marker in heterogeneous flow; no competence contrastclass 2
Flattening of buckle foldshomogeneous shortening superimposed after buckling1C, tighter folds
Kinkingsharp-hinged, straight-limbed folds in strongly anisotropic rockskink bands, chevron folds
Bendingforce applied across the layering (for example over a rising block)drape folds, forced folds

Sheath folds

In high-strain simple shear, fold hinges rotate towards the shear (stretching) direction. Strongly curved hinges become tube-like sheath folds with eye-shaped cross-sections in the YZ section. Their long axes are close to the stretching lineation, so fold hinges and \( X \) become parallel. They are an indicator of high shear strain in shear zones.

Boudinage

Boudins form when a competent layer in a less competent matrix is stretched parallel to its layering. The layer necks and separates into segments, like a string of sausages (boudin is French for a type of sausage).

TypeAppearanceConditions
Pinch-and-swelllayer thins and thickens without separatinglow competence contrast
Drawn (necked) boudinstapered ends, lens-shaped or barrel-shapedmoderate contrast, ductile necking
Torn (blocky) boudinsrectangular segments with sharp fractureshigh contrast, brittle layer
Chocolate-tablet boudinagetwo sets of necks at about right anglesextension in two directions within the layer (flattening)
Domino boudinsblocks rotated, separated by antithetic slipasymmetric; layer oblique to the extension
Shearband boudinsseparated along synthetic shear surfaces, lens-shapedasymmetric; common in mylonites
Foliation boudinageboudins in an already foliated rock without a distinct layeranisotropy of the foliation itself

Features:

  • The space between boudins (the neck) is often filled with quartz or calcite, precipitated as the gap opened, or with matrix that flowed in, forming scar folds.
  • In one-direction boudinage, the boudin axes (neck lines) are perpendicular to the extension direction: a neck lineation lies normal to \( X \).
  • Boudins form in the extension field of the strain ellipsoid; folds of the same layer form in the shortening field. A layer that has been folded and then boudinaged (or vice versa) records rotation through these fields.
  • Asymmetric (domino and shearband) boudins give a shear sense.

Foliations

Classification

FoliationDescriptionCommon origin
Bedding (S\(_0\))primary layeringsedimentation
Disjunctive (spaced) cleavagediscrete cleavage domains (dark, insoluble-rich seams) separated by microlithons with little changepressure solution; low grade
Slaty cleavagecontinuous, penetrative fabric of aligned fine phyllosilicateslow-grade metamorphism of mudrocks; approximately the \( XY \) plane
Phyllitic and schistositycoarser aligned micas (phyllite sheen, then visible micas)increasing metamorphic grade
Crenulation cleavagean earlier foliation micro-folded, with new cleavage along the limbssecond deformation (S\(_2\)); zonal (gradational) or discrete
Gneissic layeringalternating light and dark mineral bandshigh-grade metamorphism, segregation, transposition
Mylonitic foliationfine-grained, layered, with a strong lineationductile shear zones

Cleavage forms by mechanical rotation of grains, pressure solution with removal of soluble material, and recrystallisation and growth of minerals in the preferred orientation. Spaced pressure-solution cleavage may imply volume loss.

Cleavage and folds

  • Axial-planar cleavage forms parallel (or nearly) to the axial surfaces of folds formed in the same event.
  • Cleavage refraction: in competent layers cleavage is at a higher angle to bedding and tends to fan so that it converges towards the fold core; in incompetent layers it lies closer to the axial surface or fans the other way.
  • Transected folds: cleavage cuts across the axial surface at a small angle. This indicates that cleavage and folding were not exactly coeval; transpression is one proposed cause.
  • Bedding–cleavage intersection lineation is parallel to the fold hinge in a non-transected fold.

Bedding–cleavage relationships tell you where you are on a fold. For a fold with steep axial-planar cleavage:

ObservationInterpretation
Cleavage dips more steeply than bedding, both in the same directionright-way-up limb
Bedding dips more steeply than cleavage, both in the same directionoverturned limb
Cleavage perpendicular to beddinghinge zone

The acute angle between bedding and cleavage points towards the hinge of the adjacent antiform or synform. Combine this with way-up criteria to determine facing.

Lineations

LineationFormed byRelation to strain or structure
Intersectionintersection of two planes (e.g. bedding and cleavage)parallel to the fold hinge for axial-planar cleavage
Crenulationhinges of microfolds of an earlier foliationparallel to F\(_2\) hinges
Mineral (mineral-elongation)preferred alignment of elongate minerals (amphibole, sillimanite)often parallel to \( X \)
Stretchingelongated pebbles, ooids, aggregates, pressure shadowsparallel to \( X \); in shear zones close to the transport direction
Boudin neckneck lines of boudinsperpendicular to the extension direction
Mullionslarge cylindrical corrugations at the interface of competent and incompetent rockparallel to fold hinges
Rodselongate bodies of segregated material (often quartz)usually parallel to fold hinges
Slickenlinesstriations or fibres on fault surfacesparallel to slip direction

Lineations are not all the same kind: a stretching lineation records the \( X \) direction, an intersection lineation records geometry only. Confusing the two is a standard error in kinematic interpretation.

Superposed Folding

When an area is folded twice, early folds (F\(_1\)) with their axial-planar foliation (S\(_1\)) and lineation (L\(_1\)) are refolded by F\(_2\) with S\(_2\) and L\(_2\). The notation numbers structures in order of formation in that area; F\(_2\) in one area need not be the same age as F\(_2\) somewhere else.

Ramsay’s interference patterns

The pattern depends on the orientations of the F\(_2\) axis and slip direction relative to the F\(_1\) fold:

TypeGeometryOutcrop patternMnemonic
0F\(_2\) coaxial and coplanar with F\(_1\)F\(_1\) simply tightened; no interference visible“zero: you can’t see it”
1F\(_1\) and F\(_2\) both upright with axes at a high angledome-and-basin (egg-carton)“1: one egg box”
2F\(_2\) upright with axis at a high angle to F\(_1\) hinge; F\(_1\) axial surface inclined to recumbentmushroom, crescent, boomerang“2: two caps on a mushroom”
3F\(_2\) axis parallel to F\(_1\) axis; F\(_1\) axial surface recumbent, F\(_2\) uprighthook or refolded isocline (“convergent–divergent”)“3: a fish hook”
graph TD
    A[Two fold generations] --> B{F2 axis parallel to F1 axis?}
    B -- Yes --> C{F1 and F2 axial surfaces parallel?}
    C -- Yes --> D[Type 0: redundant, coaxial]
    C -- No --> E[Type 3: hook]
    B -- No --> F{F1 axial surface upright?}
    F -- Yes --> G[Type 1: dome and basin]
    F -- No, recumbent or inclined --> H[Type 2: mushroom or crescent]

Recognising superposition

  • Refolded axial traces of F\(_1\) on a map; folded S\(_1\) with S\(_2\) crenulation cleavage.
  • L\(_1\) lineations are folded around F\(_2\) hinges. If F\(_2\) folding was flexural, L\(_1\) lies along a small circle about the F\(_2\) axis on a stereonet. If F\(_2\) was passive (similar), L\(_1\) lies on a great circle containing the F\(_2\) slip direction.
  • Overprinting: S\(_2\) cuts S\(_1\); porphyroblasts with internal S\(_1\) inclusion trails and external S\(_2\).
  • Fold axes are spread out on a stereonet (non-cylindrical), and the π-diagram has no single girdle. Divide the area into domains in which F\(_1\) is cylindrical and analyse each separately.

Memory Tricks

Don’t Confuse

ThisWith thisDifference
AntiformAnticlinecloses upward versus older rocks in core
Class 1B (parallel)Class 2 (similar)constant orthogonal thickness versus constant axial-parallel thickness
Fold axisAxial surfacea line versus a plane
VergenceFacingasymmetry sense versus younging direction
Slaty cleavageCrenulation cleavagefirst, continuous foliation versus micro-folding of an earlier foliation
Stretching lineationIntersection lineationparallel to \( X \) versus a geometric intersection
Pinch-and-swellBoudinagelow contrast, no separation versus separation into segments
Type 2 interferenceType 3 interferenceF\(_2\) axis at high angle to F\(_1\) versus coaxial with F\(_1\)

Common Mistakes

Practice

All questions below are original practice questions written for these notes.

Level 1: Foundation

  1. Practice. A fold has an interlimb angle of 50°. Name it by Fleuty’s scheme.
  2. Practice. In which Ramsay class are dip isogons parallel to one another?
  3. Practice. Which interference type gives a dome-and-basin pattern?
Answers
  1. Close (70–30°).
  2. Class 2 (similar folds).
  3. Type 1.

Level 2: Part B Style

Practice Q4. On a limb dipping 40°, the orthogonal thickness of a folded layer is 0.6 times its hinge thickness. The fold class is:

(a) 1A (b) 1C (c) 2 (d) 3

Answer: (d) 3

\( \cos 40° = 0.766 \). \( t'_\alpha = 0.6 < \cos\alpha \), so isogons diverge: class 3, typical of an incompetent layer. A value of 0.766 would be class 2.

Practice Q5. A 20 cm competent layer with viscosity 1,000 times that of the matrix buckles. The dominant wavelength (Biot) is closest to:

(a) 1.3 m (b) 3.5 m (c) 6.9 m (d) 12.6 m

Answer: (c)

\( L_d = 2\pi(0.2)(1000/6)^{1/3} = 1.257\times 5.50 = 6.9 \) m. Option (b) uses \( t = 0.1 \) m; (d) omits the factor 6.

Practice Q6. In an area of upright folds with axial-planar slaty cleavage, an outcrop shows bedding dipping 40° E and cleavage dipping 70° E. Which statement is correct?

(a) The beds are overturned (b) The beds are the right way up (c) The outcrop is in the fold hinge (d) Nothing can be said without fossils

Answer: (b)

Cleavage steeper than bedding with the same dip direction indicates a right-way-up limb. If bedding were steeper than cleavage, the limb would be overturned.

Practice Q7. Poles to bedding measured around a cylindrical fold plot along a great circle striking 090° and dipping 70° N. The fold axis:

(a) plunges 70° towards 000° (b) plunges 20° towards 180° (c) plunges 20° towards 000° (d) is horizontal, trending 090°

Answer: (b)

The fold axis is the pole to the π-circle. A plane dipping 70° N has its pole plunging \( 90° - 70° = 20° \) in the opposite direction, towards 180°.

Level 3: Part C Style

Practice Q8. In a folded multilayer, three isolated sandstone layers in the same shale show:

LayerThickness (cm)Fold wavelength (cm)
A5100
B10205
C20395

Which statements are correct?

  1. The constant ratio \( L/t \approx 20 \) is consistent with buckling governed by the dominant wavelength.
  2. The viscosity ratio of sandstone to shale is roughly 190.
  3. If the layers had folded passively, wavelength would still scale with layer thickness.
  4. Subsequent homogeneous flattening would shorten wavelengths and tighten the folds, moving them towards class 1C.

(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 4 only
  • 1 true: \( L/t \) = 20, 20.5, 19.75, nearly constant, as buckling theory predicts.
  • 2 true: \( \mu_L/\mu_M = 6(L/2\pi t)^3 = 6(3.18)^3 \approx 190 \).
  • 3 false: passive folds have no preferred wavelength linked to thickness; that link is the signature of buckling.
  • 4 true: homogeneous shortening after buckling reduces wavelength and changes parallel folds towards 1C.

Practice Q9. In a gneiss terrain, a map shows closed, crescent-shaped outcrops of a quartzite marker. On a stereonet, F\(_1\) mineral lineations lie on a great circle, and F\(_2\) folds are upright with axes at a high angle to the F\(_1\) hinges. The F\(_1\) folds are recumbent isoclines. The most consistent interpretation is:

(a) Type 1 interference; F\(_2\) folding by flexural slip (b) Type 2 interference; F\(_2\) folding was largely passive (similar) (c) Type 3 interference; F\(_2\) coaxial with F\(_1\) (d) A single fold generation, because crescents form in sheath folds only

Answer: (b)

Recumbent F\(_1\) refolded by upright F\(_2\) with axes at a high angle gives Type 2 (mushroom, crescent). L\(_1\) on a great circle points to passive (similar) F\(_2\) folding; flexural folding would put L\(_1\) on a small circle. Type 3 requires coaxial folds. Sheath folds can also give closed shapes, but the two distinct fold sets with overprinting rule out (d).

Practice Q10. Which statements about boudinage are correct?

  1. Chocolate-tablet boudinage indicates extension in two directions within the layer.
  2. Boudin neck lines are parallel to the stretching direction \( X \).
  3. Torn boudins with sharp fractures imply a larger competence contrast than pinch-and-swell.
  4. Domino and shearband boudins can give a sense of shear.

(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 3 and 4 only
  • 1 true: two sets of necks mean extension in two in-plane directions (flattening strain).
  • 2 false: necks are perpendicular to the extension direction.
  • 3 true: brittle separation needs a strong, stiff layer; pinch-and-swell forms at low contrast.
  • 4 true: asymmetric boudins are kinematic indicators.

Quick Revision Table

IdeaFact or formula
Interlimb anglegentle > 120°, open 120–70°, close 70–30°, tight < 30°, isoclinal 0°, elastica negative
Orientationupright 80–90°, recumbent 0–10° axial-surface dip; plunge classes 10, 30, 60, 80°
Ramsay classes1A \( t' > 1 \); 1B \( t' = 1 \); 1C \( \cos\alpha < t' < 1 \); 2 \( t' = \cos\alpha \); 3 \( t' < \cos\alpha \)
π-diagrampoles to bedding on a great circle; its pole = fold axis
Biot\( L_d = 2\pi t(\mu_L/6\mu_M)^{1/3} \)
Fold mechanismsflexural slip, flexural flow, tangential longitudinal strain, passive, kink, bending
Parasitic foldsZ (left limb), M (hinge), S (right limb) across an antiform looking down plunge; vergence towards the antiform hinge
Boudinspinch-and-swell, drawn, torn, chocolate tablet, domino, shearband; necks normal to \( X \)
Foliationsspaced, slaty, schistosity, crenulation, gneissic, mylonitic
Bedding–cleavagecleavage steeper = normal limb; bedding steeper = overturned
Lineationsintersection, crenulation, mineral, stretching (∥ \( X \)), boudin neck, mullion, rod, slickenline
Interference0 coaxial-coplanar; 1 dome-basin; 2 mushroom; 3 hook
Refolded L\(_1\)small circle (flexural F\(_2\)); great circle (passive F\(_2\))

Key Takeaways

What’s Next