Skip to content

Himalayan Orogeny and Supercontinents

CSIR NET Geology Part C: India-Asia collision, Himalayan units and thrusts, inverted metamorphism, channel flow, Tibet; Wilson cycle, Rodinia, Gondwana, Pangea.

  • 18 min read
  • Updated
On this page · 11 sections
  1. Prerequisites
  2. The Hook: Marine Fossils at 8,000 Metres
  3. The India–Asia Collision
  4. Supercontinents
  5. Memory Tricks
  6. Don’t Confuse
  7. Common Mistakes
  8. Practice
  9. Quick Revision Table
  10. Key Takeaways
  11. What’s Next

Prerequisites

The Hook: Marine Fossils at 8,000 Metres

The India–Asia Collision

From Gondwana to Asia

After India rifted from Gondwana in the Cretaceous, it moved rapidly north, closing the Neo-Tethys ocean by subduction beneath the southern margin of Asia. Subduction built an Andean-type magmatic arc along Asia’s margin: the Transhimalayan batholiths (Ladakh batholith in India, Gangdese batholith in Tibet), mainly Cretaceous to Eocene. In the west, an intra-oceanic island arc (the Kohistan–Ladakh arc) was caught between the two continents.

When continental India arrived at the trench, its buoyant crust could not be subducted far. Collision began, India’s northward speed dropped sharply, and convergence continued by crustal thickening, thrusting and lateral escape of Asian crust.

EventApproximate timing (most cited estimates)
India separates from Antarctica–AustraliaEarly Cretaceous
India separates from MadagascarLate Cretaceous
Fast northward drift of IndiaLate Cretaceous to early Paleogene
Deccan Traps erupt; Seychelles separate from Indiaaround 66–62 Ma
Onset of India–Asia collisionmost estimates about 50–55 Ma; a range from about 60 to about 35 Ma has been argued
Main Central Thrust and South Tibetan Detachment active; leucogranites emplacedMiocene
Present convergence across the Himalayaabout 2 cm yr\(^{-1}\) (GPS)

The timing of collision is debated because “collision” can be dated in different ways: the first arrival of Asian detritus on India, the end of marine sedimentation, the slowdown in India’s motion, or the age of ultrahigh-pressure metamorphism.

Tectonic units from south to north

graph TD
    A[Indo-Gangetic foreland basin] -->|Main Frontal Thrust| B[Sub-Himalaya: Siwalik Group molasse]
    B -->|Main Boundary Thrust| C[Lesser Himalaya: mainly Proterozoic low-grade sediments]
    C -->|Main Central Thrust| D[Higher Himalayan Crystallines: high-grade gneiss, migmatite, leucogranite]
    D -->|South Tibetan Detachment System, normal sense| E[Tethyan Himalaya: fossiliferous Neoproterozoic to Eocene sediments]
    E -->|Indus-Tsangpo Suture Zone| F[Transhimalaya: Ladakh and Gangdese batholiths, Asian margin]
UnitRocksBounding fault (to the south)
Sub-Himalaya (Siwaliks)Neogene–Quaternary fluvial molasse (sandstone, mudstone, conglomerate) shed from the rising mountains; folded and thrustMain Frontal Thrust (MFT, also Himalayan Frontal Thrust): the youngest, active thrust at the mountain front
Lesser Himalayamainly Proterozoic sedimentary and low-grade metasedimentary rocks, with some granites and klippen of crystalline rocksMain Boundary Thrust (MBT)
Higher (Greater) Himalayan Crystallineskyanite- and sillimanite-grade gneisses, migmatites, Miocene leucogranitesMain Central Thrust (MCT): a thick ductile shear zone with top-to-south sense
Tethyan (Tethys) Himalayathick Neoproterozoic to Eocene passive-margin sediments of India’s northern margin, rich in fossils (Spiti and Zanskar are classic sections)South Tibetan Detachment System (STDS): north-dipping, normal-sense (top-to-north) faults and shear zones
Indus–Tsangpo Suture Zoneophiolites (for example Spontang and Nidar in Ladakh), mélange, Indus molassethe suture between India and Asia
TranshimalayaLadakh–Gangdese batholiths, arc volcanicsAsian plate

Sequence of thrusting: the thrusts get younger towards the south (foreland): MCT (mainly Miocene) → MBT → MFT (active). This is the piggy-back (in-sequence) order of a foreland-propagating thrust belt.

The Main Himalayan Thrust (MHT) is the basal décollement. The MFT, MBT and MCT all root into it at depth. Great Himalayan earthquakes, including the 2015 Gorkha (Nepal) earthquake of about \( M_w \) 7.8, rupture parts of the MHT.

Inverted metamorphism

Across the MCT zone, metamorphic grade increases structurally upward: from chlorite and biotite zones in the Lesser Himalaya through garnet, staurolite and kyanite to sillimanite and migmatite in the Higher Himalaya. Hotter rocks lie above colder ones, the reverse of a normal geotherm.

ModelIdea
Hot-iron (thrusting of hot over cold)the hot Higher Himalayan slab heats the rocks below it
Shear heatingfrictional and viscous heating on the MCT
Post-metamorphic folding or imbricationnormal isograds folded or stacked by later thrusts
Channel flow and ductile extrusionthe high-grade sequence was extruded as a coherent slab, preserving its metamorphic profile upside-down relative to the units below

How the Higher Himalaya was exhumed

  • Channel flow (C. Beaumont and co-workers, 2001): mid-crustal rocks beneath Tibet were partly molten and weak; they flowed south in a channel bounded by the MCT below and the STDS above, and focused erosion at the Himalayan front drew them to the surface.
  • Wedge extrusion: a rigid or ductile wedge extruded between the two faults.
  • Critical taper: the Himalaya as a wedge growing by accretion at its front and duplexing at depth (for example the Lesser Himalayan duplex), with out-of-sequence thrusting to maintain taper.

These are not mutually exclusive; many workers see channel flow in the Miocene followed by wedge behaviour later.

Tibet and lateral escape

The Tibetan Plateau averages about 5 km in elevation over crust about twice the normal thickness (about 70 km). Two classic ideas explain how India’s continued penetration is accommodated:

  • Crustal thickening of Tibet, isostatically supporting the plateau.
  • Lateral extrusion (escape tectonics): P. Molnar and P. Tapponnier (1975) compared India to a rigid indenter pushing into Asia, with blocks of Asia squeezed east along great strike-slip faults (Altyn Tagh, Kunlun, Red River and others). The Karakoram Fault in the west is dextral; the Altyn Tagh is sinistral.

Southern Tibet today is extending east–west on north–south rifts, showing that the plateau has reached a height at which gravitational forces resist further thickening.

Other features

  • Ultrahigh-pressure (UHP) rocks: coesite-bearing eclogites at Tso Morari (Ladakh) and Kaghan (Pakistan) show that the leading edge of India was subducted to depths of about 100 km or more early in the collision and then returned to the surface.
  • Syntaxes: at its western (Nanga Parbat) and eastern (Namche Barwa) ends, the range bends sharply. Both syntaxes have exceptionally young metamorphism and rapid exhumation, linked to deep river incision (the Indus and the Yarlung Tsangpo–Brahmaputra).
  • Foreland basin: the Indo-Gangetic plain is a flexural foreland basin formed as the Indian plate bends under the load of the mountains.
  • Great earthquakes (commonly cited magnitudes): 1905 Kangra (about \( M \) 7.8), 1934 Bihar–Nepal (about 8), 1950 Assam (about 8.6), 2005 Kashmir (about 7.6), 2015 Gorkha (about 7.8). A long stretch of the central Himalaya without a great earthquake in historical times is called the central seismic gap.

Supercontinents

The Wilson cycle and the supercontinent cycle

J. T. Wilson (1966) asked whether the Atlantic had closed and then reopened, after noting that fossils and rocks on either side of the Caledonian–Appalachian belt matched the “wrong” continents. The Wilson cycle is the life cycle of an ocean basin:

  1. Continental rifting (East Africa)
  2. Young narrow ocean (Red Sea)
  3. Mature ocean with passive margins (Atlantic)
  4. Subduction begins; ocean shrinks (Pacific)
  5. Narrow remnant ocean (Mediterranean)
  6. Continental collision and suture (Himalaya)
  7. Peneplanation, then rifting again, often along the old suture

The supercontinent cycle is the larger rhythm in which most continental crust repeatedly gathers into one mass and disperses, over a few hundred million years.

The supercontinents

SupercontinentApproximate time of existenceAssembled byNotes
Kenorland / Superia (Neoarchean)about 2.7–2.5 GaNeoarchean cratonisationdebated: one supercontinent or several separate “supercratons”
Columbia (Nuna)about 1.8–1.5 Gaworldwide collisional orogens about 2.1–1.8 Ga (Paleoproterozoic)names proposed by Rogers and Santosh (Columbia) and Hoffman (Nuna)
Rodiniaabout 1.0–0.75 GaGrenvillian-age orogens about 1.3–0.9 Gabreakup in the Neoproterozoic, around the Cryogenian (“Snowball Earth”) glaciations
Gondwana (with Pannotia, a short-lived possible supercontinent)from about 0.55 GaPan-African and Brasiliano orogens (including the East African Orogen), about 0.65–0.5 Gasouthern continents: South America, Africa, Arabia, Madagascar, India, Sri Lanka, Antarctica, Australia
Pangeaabout 0.32–0.18 GaVariscan (Hercynian), Alleghanian and Uralian orogens (Gondwana + Laurussia + Siberia)breakup from the Early Jurassic; the Central Atlantic opened first
Futurein perhaps 200–250 Myr—Amasia, Pangea Proxima (Ultima), Novopangea and Aurica are competing models

Laurasia was the northern half of Pangea (North America, Europe, Asia); Gondwana the southern half, separated by the Tethys. The name Gondwana comes from the Gond region of central India, where the Gondwana Supergroup (with Glossopteris flora) was described.

How supercontinents assemble

Two end-member modes have been proposed:

ModeOceans that closeExample often given
Introversionthe young, interior oceans formed by the previous breakupPangea (closure of the Iapetus and Rheic oceans)
Extroversionthe old, exterior ocean that surrounded the previous supercontinentGondwana / Pannotia

A third, orthoversion, puts the new supercontinent about 90° away from the centre of the previous one, along the great circle of subduction around it.

Evidence for past supercontinents

EvidenceWhat it shows
Palaeomagnetism and apparent polar wander paths (APWPs)when two continents share a segment of APWP, they moved together
Matching orogenic belts, cratons and dyke swarms across now-separated continentsformer continuity
Detrital zircon U–Pb age peakscrust preserved in pulses that coincide with supercontinent assembly (roughly 2.7, 1.9, 1.0, 0.6 and 0.3 Ga)
Passive-margin recordmany margins form at breakup, few during assembly
Glacial deposits (tillites) and fossils (Glossopteris, Mesosaurus, Lystrosaurus)Gondwana configuration
Global sea level and seawater \( ^{87}\text{Sr}/^{86}\text{Sr} \)change with continental erosion and ridge activity

India in the supercontinents

  • Gondwana: India lay between Madagascar (west), East Antarctica (south-east) and Australia, with Sri Lanka to the south. The Pan-African (about 0.55 Ga) high-grade belts of southern India (the Southern Granulite Terrane, Kerala Khondalite Belt) continue into Madagascar, Sri Lanka and East Antarctica.
  • Rodinia: the Eastern Ghats Belt of India is commonly correlated with the Rayner Complex of East Antarctica, both recording granulite metamorphism around 1.0 Ga.
  • Columbia/Nuna: the Indian cratons (Dharwar, Bastar, Singhbhum, Bundelkhand–Aravalli) are thought to have been part of it, but their exact position is debated.
  • Breakup: India–Madagascar left Antarctica–Australia in the Early Cretaceous (the Rajmahal Traps and the Kerguelen plume are associated); India separated from Madagascar in the Late Cretaceous; the Seychelles separated from India around the time of the Deccan eruptions; India then drifted north to collide with Asia.

Memory Tricks

Don’t Confuse

ThisWith thisDifference
MCTMBTbetween Higher Himalaya and Lesser Himalaya (ductile, Miocene) versus between Lesser Himalaya and Siwaliks (younger, more brittle)
MFTMHTemergent frontal thrust at the mountain front versus the basal décollement into which all thrusts root
STDSMCTnormal sense, north-dipping, top of the slab versus thrust sense, base of the slab
Indus–Tsangpo SutureShyok sutureIndia–arc (or India–Asia) suture versus arc–Asia suture north of Ladakh
Tethyan HimalayaTranshimalayaIndian passive-margin sediments versus Asian arc batholiths
GondwanaPangeasouthern supercontinent, assembled about 0.55 Ga versus all continents, about 0.32–0.18 Ga
RodiniaColumbiaabout 1.0 Ga, Grenvillian versus about 1.8–1.5 Ga, Paleoproterozoic orogens
Wilson cycleSupercontinent cycleone ocean basin’s life versus global assembly and dispersal

Common Mistakes

Practice

All questions below are original practice questions written for these notes.

Level 1: Foundation

  1. Practice. Which fault separates the Lesser Himalaya from the Higher Himalayan Crystallines?
  2. Practice. Which major Himalayan fault system has a normal sense of movement?
  3. Practice. Which supercontinent was assembled by Grenvillian-age orogens around 1.0 Ga?
Answers
  1. The Main Central Thrust (MCT).
  2. The South Tibetan Detachment System (STDS).
  3. Rodinia.

Level 2: Part B Style

Practice Q4. The correct south-to-north order of Himalayan tectonic units is:

(a) Siwaliks → Higher Himalaya → Lesser Himalaya → Tethyan Himalaya (b) Siwaliks → Lesser Himalaya → Higher Himalaya → Tethyan Himalaya (c) Lesser Himalaya → Siwaliks → Tethyan Himalaya → Higher Himalaya (d) Tethyan Himalaya → Higher Himalaya → Lesser Himalaya → Siwaliks

Answer: (b)

Siwaliks (south of the MBT), Lesser Himalaya (between MBT and MCT), Higher Himalaya (between MCT and STDS), Tethyan Himalaya (north of the STDS, south of the suture). Option (d) is the north-to-south order.

Practice Q5. If continental crust 35 km thick is doubled in thickness and is in Airy isostatic equilibrium (\( \rho_c = 2{,}800 \), \( \rho_m = 3{,}300 \) kg m\(^{-3}\)), the surface rises by about:

(a) 2.0 km (b) 5.3 km (c) 17.5 km (d) 35 km

Answer: (b)

\( h = \Delta T(\rho_m - \rho_c)/\rho_m = 35\times 500/3300 \approx 5.3 \) km. The remaining 29.7 km is the root.

Practice Q6. A palaeomagnetic sample has an inclination of magnitude 40°. Assuming a geocentric axial dipole, its palaeolatitude is about:

(a) 11° (b) 20° (c) 23° (d) 40°

Answer: (c)

\( \tan\lambda = \tan 40°/2 = 0.42 \), \( \lambda \approx 22.8° \). Setting latitude equal to inclination (d) is the standard error.

Practice Q7. The Pan-African orogeny is most directly associated with the assembly of:

(a) Columbia (b) Rodinia (c) Gondwana (d) Pangea

Answer: (c)

Pan-African and Brasiliano orogens (about 0.65–0.5 Ga) welded East and West Gondwana. Rodinia is linked to Grenvillian orogens; Pangea to Variscan, Alleghanian and Uralian orogens.

Level 3: Part C Style

Practice Q8. A traverse from the Lesser Himalaya into the Higher Himalayan Crystallines shows mineral zones in this structural order (base to top): chlorite → biotite → garnet → kyanite → sillimanite + melt. Shear-sense indicators in the MCT zone show top-to-south; those in a shear zone at the top of the crystallines show top-to-north. Which statements are correct?

  1. The metamorphic sequence is inverted.
  2. The opposite shear senses at the base and top are consistent with southward extrusion of the crystalline slab.
  3. The top-to-north shear zone is part of the South Tibetan Detachment System.
  4. Inverted metamorphism proves that the Higher Himalayan rocks were metamorphosed after thrusting.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  • 1 true: grade increases upward.
  • 2 true: thrust below and normal sense above means the slab moved south relative to both its floor and its roof.
  • 3 true: the STDS is the top-to-north (normal) system at the top of the Higher Himalaya.
  • 4 false: inverted metamorphism has several explanations (hot-iron thrusting, shear heating, folding of isograds, extrusion of a pre-metamorphosed slab). It does not prove a single sequence.

Practice Q9. Using the data of the worked example (site now at 20° N, a 60 Ma sample with inclination −40°, normal polarity), which statements are correct?

  1. The site was at about 23° S at 60 Ma.
  2. The average northward drift rate since 60 Ma is about 8 cm yr\(^{-1}\).
  3. Palaeomagnetism alone also gives the palaeolongitude of the site.
  4. If collision slowed India at about 50 Ma, the true pre-collision rate was greater than the average.

(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 4 only
  • 1 true: \( \lambda = \tan^{-1}(\tan 40°/2) \approx 22.8° \) S (negative inclination, normal polarity).
  • 2 true: \( 42.8° \times 111 \) km \( \approx 4{,}750 \) km in 60 Myr \( \approx 7.9 \) cm yr\(^{-1}\).
  • 3 false: a geocentric axial dipole is symmetric about the spin axis, so palaeomagnetism gives latitude and rotation, not longitude.
  • 4 true: if the later part was slow, the earlier part had to be faster than the average to cover the same distance.

Practice Q10. GPS shows that a segment of the Main Himalayan Thrust is locked and accumulating a slip deficit of 18 mm yr\(^{-1}\). The last great earthquake on it was 500 years ago. If all of the deficit is released in one earthquake rupturing an area 200 km × 80 km (shear modulus \( 3\times 10^{10} \) Pa, \( M_w = \frac{2}{3}(\log_{10}M_0 - 9.1) \), \( M_0 \) in N m), its magnitude is closest to:

(a) 7.4 (b) 7.8 (c) 8.4 (d) 9.0

Answer: (c)

Slip deficit \( D = 0.018\times 500 = 9 \) m.

\( M_0 = \mu A D = 3\times 10^{10}\times(2\times 10^{5}\times 8\times 10^{4})\times 9 = 4.32\times 10^{21} \) N m.

\( M_w = \frac{2}{3}(21.64 - 9.1) \approx 8.36 \), so about 8.4. This kind of calculation is why the central seismic gap is a concern; real ruptures may release the deficit in several smaller events, and part of the convergence may be taken up aseismically.

Quick Revision Table

IdeaFact
Units S to NSiwaliks, Lesser Himalaya, Higher Himalayan Crystallines, Tethyan Himalaya, Indus–Tsangpo Suture, Transhimalaya
Faults S to NMFT, MBT, MCT (thrusts, young southward); STDS (normal); ITSZ (suture)
Basal décollementMain Himalayan Thrust; MFT, MBT, MCT root into it
Collision onsetmost estimates about 50–55 Ma (debated)
Present convergence across Himalayaabout 2 cm yr\(^{-1}\)
Inverted metamorphismgrade rises structurally upward across the MCT zone
Exhumation modelschannel flow (Beaumont et al.), wedge extrusion, critical taper
UHPcoesite eclogites at Tso Morari and Kaghan
OphiolitesSpontang, Nidar (Ladakh) in the suture zone
Tibetabout 5 km high, about 70 km crust; lateral extrusion (Molnar and Tapponnier); E–W extension today
SyntaxesNanga Parbat (west), Namche Barwa (east)
SupercontinentsKenorland (about 2.7–2.5 Ga, debated), Columbia/Nuna (about 1.8–1.5 Ga), Rodinia (about 1.0–0.75 Ga), Gondwana (from about 0.55 Ga), Pangea (about 0.32–0.18 Ga)
Building orogensPaleoproterozoic (Columbia), Grenvillian (Rodinia), Pan-African (Gondwana), Variscan/Alleghanian/Uralian (Pangea)
India linksEastern Ghats–Rayner (Rodinia); Southern Granulite Terrane Pan-African (Gondwana)
Assembly modesintroversion, extroversion, orthoversion

Key Takeaways

What’s Next

Advertisement
Advertisement