Structural Geology and Geotectonics Short Notes
CSIR NET Geology Part C revision: Mohr circle, failure and reactivation, strain, deformation mechanisms, shear zones, folds, tectonic regimes, Himalaya.
- 9 min
On this page · 12 sections
Every formula, classification and trap from Stress, Mohr Circle, Failure Criteria and Fault Reactivation, Strain Ellipsoid, Tectonic Fabrics and Strain Analysis, Deformation Mechanisms and Shear Zones, Folds, Boudins, Foliations, Lineations and Superposed Folding, Extensional, Compressional and Strike-Slip Terrains; Mantle Plumes and Himalayan Orogeny and Supercontinents, on one page.
Part C in one table
Per the NTA information bulletin for December 2026, Earth Sciences Part C:
| Given | Attempt | Correct | Wrong | Maximum |
|---|---|---|---|---|
| 80 | 25 | +4 | −1.32 | 100 |
Part C is split by discipline; this unit is in the Geology section. Full pattern on the Earth Sciences overview. The Part B basics behind this unit are in Stress, Strain, Folds, Joints and Faults.
Stress and the Mohr circle
Compression positive; \( \sigma_1 \geq \sigma_2 \geq \sigma_3 \). \( \theta \) = angle between \( \sigma_1 \) and the plane’s normal.
$$\boxed{\sigma_n = \frac{\sigma_1 + \sigma_3}{2} + \frac{\sigma_1 - \sigma_3}{2}\cos 2\theta} \qquad \boxed{\tau = \frac{\sigma_1 - \sigma_3}{2}\sin 2\theta}$$| Item | Value |
|---|---|
| Mean stress | \( (\sigma_1 + \sigma_2 + \sigma_3)/3 \) |
| Differential stress | \( \sigma_1 - \sigma_3 \) (circle diameter) |
| Stress ratio | \( \Phi = (\sigma_2 - \sigma_3)/(\sigma_1 - \sigma_3) \) |
| Lithostatic gradient | about 26.5 MPa km\(^{-1}\) (\( \rho = 2{,}700 \)); hydrostatic about 9.8 MPa km\(^{-1}\) |
| Uniaxial-strain horizontal stress | \( \sigma_h = \frac{\nu}{1-\nu}\sigma_v \) |
| 3D Mohr | three circles; \( \tau_{\max} = (\sigma_1 - \sigma_3)/2 \) on planes containing \( \sigma_2 \) |
Failure, fracture and reactivation
$$\boxed{\sigma_c = \sqrt{\frac{2E\gamma}{\pi a}}} \qquad \boxed{\tau^2 = 4T(\sigma_n + T)} \qquad \boxed{\tau = C + \mu\sigma_n}$$$$\boxed{\sigma_1 = \sigma_3\tan^2\left(45° + \frac{\phi}{2}\right) + 2C\tan\left(45° + \frac{\phi}{2}\right)} \qquad \boxed{\alpha_f = 45° - \frac{\phi}{2}\ \text{to}\ \sigma_1}$$| Item | Value |
|---|---|
| Fracture modes | I opening (joints, veins, dykes); II sliding; III tearing |
| Griffith UCS | \( 8T \) (2D) |
| Extension / hybrid / shear | \( \Delta\sigma < 4T \) / \( 4T \)–\( 5.66T \) / \( > 5.66T \) |
| Byerlee | \( \tau = 0.85\sigma_n \) (< 200 MPa); \( 50 + 0.6\sigma_n \) (200–1,700 MPa); clays weaker |
| Effective stress | \( \sigma' = \sigma - P_f \); circle shifts left, same size; \( \lambda_v = P_f/\sigma_v \) (hydrostatic about 0.4) |
| Frictional crust (\( \mu = 0.6 \)) | \( \sigma'_1/\sigma'_3 \approx 3.12 \); about 3 times stronger in thrust than normal regime |
| Reactivation | \( R = \frac{1 + \mu_s\cot\theta_r}{1 - \mu_s\tan\theta_r} \); optimum about 29.5°, lock-up about 59° (\( \mu_s = 0.6 \)) |
| Slip / dilation tendency | \( T_s = \tau/\sigma'_n \); \( T_d = (\sigma_1 - \sigma_n)/(\sigma_1 - \sigma_3) \) |
| Joints | T-junction: abutting joint younger; spacing scales with bed thickness; plumose structure points propagation |
| Veins | crack–seal: \( P_f > \sigma_3 + T \), repeated |
| Fault-valve | steep reverse faults, near-lithostatic \( P_f \), rupture–drain–seal cycles, gold–quartz veins |
| Stress indicators | breakouts ∥ \( \sigma_{h\min} \); induced tensile fractures ∥ \( \sigma_{H\max} \); shut-in pressure = \( \sigma_{h\min} \); focal mechanism P, T axes; Wallace–Bott inversion |
Strain
| Measure | Formula |
|---|---|
| Extension, stretch, quadratic elongation | \( e = \Delta l/l_0 \), \( S = 1 + e \), \( \lambda = S^2 \) |
| Shear strain | \( \gamma = \tan\psi \) |
| Natural strain | \( \bar{\varepsilon} = \ln S \) |
| Volume change | \( S_1S_2S_3 - 1 \) |
| \( \gamma \) | 1 | 2 | 3 |
|---|---|---|---|
| \( R_s \) | 2.62 | 5.83 | 10.9 |
| \( \theta' \) | 31.7° | 22.5° | 16.8° |
| Shape and kinematics | Value |
|---|---|
| Flinn | \( a = X/Y \), \( b = Y/Z \), \( k = (a-1)/(b-1) \): 0 oblate (S), 1 plane (L-S), \( \infty \) prolate (L) |
| Ramsay | \( K = \ln a/\ln b \) |
| Lode | \( \nu = (2\bar{\varepsilon}_2 - \bar{\varepsilon}_1 - \bar{\varepsilon}_3)/(\bar{\varepsilon}_1 - \bar{\varepsilon}_3) \): \( -1 \) prolate, \( +1 \) oblate |
| Vorticity | \( W_k = 0 \) pure, 1 simple; \( W_k = \cos(\text{apophysis angle}) \) |
| ISA in simple shear | fixed at 45°; finite axes rotate towards shear plane |
| Fabric symmetry | monoclinic = non-coaxial (shear sense); orthorhombic = coaxial |
| Rf/\( \phi \) | \( R_s = \sqrt{R_{f\max}R_{f\min}} \), \( R_i = \sqrt{R_{f\max}/R_{f\min}} \) |
| Other methods | Fry (central vacancy), centre-to-centre, Wellman, Breddin, boudinaged belemnites, fibres (incremental) |
Deformation mechanisms
| Mechanism | Signs | Conditions |
|---|---|---|
| Cataclasis | angular fragments, dilatancy | low T, shallow |
| Pressure solution | stylolites, seams, overgrowths, volume loss | fluid, low T |
| Twinning | calcite e-twins (thin = cooler) | low T in calcite |
| Dislocation creep | undulose extinction, subgrains, CPO | quartz from about 280–300 °C |
| BLG / SGR / GBM (quartz) | bulges, core–mantle / subgrain-sized new grains / lobate grains | about 280–400 / 400–500 / > 500 °C |
| Diffusion creep | equant grains, weak CPO | fine grains, low stress |
| Static recrystallisation | foam texture, 120° junctions | after deformation |
Dislocation: \( n \approx 3 \)–5, \( m = 0 \). Nabarro–Herring: \( n = 1, m = 2 \). Coble: \( n = 1, m = 3 \). Grain-size reduction → diffusion creep → softening → localisation. Greenschist mylonite: quartz plastic, feldspar brittle. Brittle–ductile transition about 10–15 km (about 300 °C for quartz).
Shear zones and fault rocks
$$\boxed{\gamma = \frac{2}{\tan 2\theta'}} \qquad \boxed{D = \int_0^W\gamma\,dy}$$| Fault rocks (Sibson 1977) | Matrix % |
|---|---|
| Breccia / gouge | incohesive; fragments over / under about 30% |
| Protocataclasite, cataclasite, ultracataclasite | 10–50, 50–90, 90–100 (random fabric) |
| Protomylonite, mylonite, ultramylonite | 10–50, 50–90, 90–100 (foliated) |
| Pseudotachylyte | frictional melt = palaeo-earthquake |
Shear-sense indicators (read in XZ): S-C (S rotated towards C), C′ shear bands (synthetic), σ-clasts (tails step up in the shear direction), δ-clasts (tails wrap and cross), mica fish, oblique grain-shape foliation, asymmetric quartz c-axis girdles, domino and shearband boudins, rotated porphyroblasts, sigmoidal tension gashes.
Folds, boudins, foliations, lineations
| Classification | Values |
|---|---|
| Interlimb (Fleuty) | gentle 180–120, open 120–70, close 70–30, tight 30–0, isoclinal 0, elastica < 0 |
| Axial-surface dip | upright 80–90, steeply 60–80, moderately 30–60, gently 10–30, recumbent 0–10 |
| Ramsay classes | 1A \( t' > 1 \); 1B \( t' = 1 \) (parallel); 1C \( \cos\alpha < t' < 1 \); 2 \( t' = \cos\alpha \), \( T' = 1 \) (similar); 3 \( t' < \cos\alpha \) |
| π-diagram | poles to bedding on a great circle; pole to it = fold axis |
| Parasitic folds | Z (left limb), M (hinge), S (right limb) across an antiform, looking down plunge |
Fold mechanisms: flexural slip, flexural flow, tangential longitudinal strain (neutral surface), passive (similar), kink, bending; sheath folds at high shear strain (hinges ∥ \( X \)).
Boudins: pinch-and-swell (low contrast), drawn, torn (high contrast), chocolate tablet (two-way extension), domino and shearband (asymmetric). Necks ⟂ \( X \).
Foliations: spaced (pressure solution), slaty, schistosity, crenulation (S\(_2\)), gneissic, mylonitic. Bedding–cleavage: cleavage steeper than bedding (same dip direction) = right way up; bedding steeper = overturned.
Lineations: intersection and crenulation (∥ hinge); stretching (∥ \( X \)); mineral; boudin neck (⟂ \( X \)); mullions, rods; slickenlines (∥ slip).
Interference: Type 0 coaxial–coplanar; Type 1 dome-and-basin; Type 2 mushroom/crescent; Type 3 hook. Refolded L\(_1\): small circle (flexural F\(_2\)), great circle (passive F\(_2\)).
Tectonic regimes
| Extensional | Compressional | Strike-slip | |
|---|---|---|---|
| Vertical stress | \( \sigma_1 \) | \( \sigma_3 \) | \( \sigma_2 \) |
| Key structures | domino, listric, rollover, half-graben, core complex | ramp–flat, duplex, imbricate, nappe, klippe, window | Riedel, en echelon, flowers, pull-aparts, push-ups |
| Item | Value |
|---|---|
| Rift models | McKenzie pure shear (symmetric, thermal subsidence over tens of Myr); Wernicke simple shear (asymmetric) |
| Margins | volcanic (seaward-dipping reflectors) versus magma-poor (exhumed mantle) |
| Thrust rules | up-section towards foreland; piggy-back; thin- versus thick-skinned |
| Duplexes | hinterland-dipping, antiformal stack, foreland-dipping |
| Riedel (\( \phi = 30° \)) | R 15° synthetic; R′ 75° antithetic; P mirror of R; T 45°; Y ∥ |
| Step-overs | dextral + right step = releasing (pull-apart); dextral + left step = restraining |
| Transform | slip opposite to ridge offset; fracture zones inactive |
| Inversion | positive (normal → reverse, harpoon); negative |
Mantle plumes
Wilson (1963) hotspots; Morgan (1971) plumes; Campbell and Griffiths (1990) head–tail. Head → LIP; tail → age-progressive track (older away from the hotspot). Signs: swell about 1,000 km wide and about 1 km high, excess temperature about 100–300 °C, OIB, high \( ^3\text{He}/^4\text{He} \), low-velocity columns. Rate = distance / age difference (100 km Myr\(^{-1}\) = 10 cm yr\(^{-1}\)). Hawaiian–Emperor bend about 47 Ma. India: Deccan about 66 Ma (Réunion; Chagos–Laccadive, Mascarene), Rajmahal about 118 Ma (Kerguelen; Ninetyeast Ridge). The plume model is widely used but debated.
Himalaya
| South → north | Unit | Fault at its southern edge |
|---|---|---|
| 1 | Sub-Himalaya (Siwalik molasse) | MFT (active) |
| 2 | Lesser Himalaya (Proterozoic, low grade) | MBT |
| 3 | Higher Himalayan Crystallines (kyanite–sillimanite, leucogranites) | MCT (ductile, top-to-south) |
| 4 | Tethyan Himalaya (fossiliferous Neoproterozoic–Eocene) | STDS (normal, top-to-north) |
| 5 | Indus–Tsangpo Suture (ophiolites: Spontang, Nidar) | — |
| 6 | Transhimalaya (Ladakh–Gangdese batholiths, Asian margin) | — |
- Thrusts young southward; all root into the Main Himalayan Thrust.
- Collision onset: most estimates about 50–55 Ma (debated). Convergence across Himalaya about 2 cm yr\(^{-1}\).
- Inverted metamorphism across MCT; channel flow, wedge extrusion and critical taper models.
- Tibet: about 5 km high, about 70 km crust (Airy: \( h = \Delta T(\rho_m - \rho_c)/\rho_m \approx 5.3 \) km for 35 km extra); lateral escape (Molnar and Tapponnier, 1975).
- UHP coesite eclogites: Tso Morari, Kaghan. Syntaxes: Nanga Parbat, Namche Barwa.
Supercontinents
| Supercontinent | About | Built by |
|---|---|---|
| Kenorland / Superia | 2.7–2.5 Ga (debated) | Neoarchean cratonisation |
| Columbia / Nuna | 1.8–1.5 Ga | Paleoproterozoic orogens (2.1–1.8 Ga) |
| Rodinia | 1.0–0.75 Ga | Grenvillian orogens |
| Gondwana (Pannotia) | from 0.55 Ga | Pan-African, Brasiliano, East African Orogen |
| Pangea | 0.32–0.18 Ga | Variscan, Alleghanian, Uralian |
Wilson cycle: rift → narrow ocean → mature ocean → subduction → closure → collision. Assembly by introversion, extroversion or orthoversion. Evidence: APWPs, matching belts, detrital zircon peaks, tillites, fossils. India: Eastern Ghats–Rayner (Rodinia); Pan-African Southern Granulite Terrane (Gondwana); rifted in the Cretaceous; palaeolatitude from \( \tan I = 2\tan\lambda \).
Related pages
- Gravity, Geomagnetism, Heat Flow and Isostasy for Airy isostasy and the dipole formula used here.
- Seismology Basics and Earth’s Internal Structure for the mantle and earthquake background.
- Back to the Structural Geology and Geotectonics overview.