Skip to content

Observations and Synoptic Charts

CSIR NET Part C meteorology: surface and upper-air observations, radar and satellite, station model, chart analysis, thickness and thermodynamic diagrams.

  • 20 min read
  • Updated
On this page · 12 sections
  1. Prerequisites
  2. The Hook: A Storm That Built a Network
  3. The Synoptic Observing System
  4. Coding and Plotting: The Station Model
  5. Analysing Surface and Upper-Air Charts
  6. Memory Tricks
  7. Don’t Confuse
  8. Common Mistakes
  9. Practice
  10. Quick Revision Table
  11. Key Takeaways
  12. What’s Next

Prerequisites

The Hook: A Storm That Built a Network

How CSIR NET asks it. Part C questions on this line are of three kinds: decoding (a station model, a wind barb, a pressure code), computing (geostrophic wind from isobar spacing, thickness from mean temperature, radar range and Nyquist velocity, rain rate from reflectivity), and interpreting (which satellite channel shows what, why geostrophic analysis fails near the equator, what a thickness ridge implies).


The Synoptic Observing System

graph TD
    A["Surface stations
manned and AWS"] --> G["Global Telecommunication
System (WMO)"] B["Ships, buoys,
Argo floats"] --> G C["Upper air
radiosonde, pilot balloon,
wind profiler"] --> G D["Aircraft reports"] --> G E["Satellites
imagery, soundings, AMVs,
scatterometer winds"] --> G F["Weather radar
reflectivity, radial velocity"] --> N["Nowcasting"] G --> H["Analysis:
charts and data assimilation"] H --> I["Forecast: synoptic
reasoning and NWP"] F --> H

Surface observations

The World Meteorological Organization (WMO) fixes common observing times in Coordinated Universal Time (UTC) so that every country’s reports are simultaneous.

ItemStandard practice
Main synoptic hours00, 06, 12, 18 UTC
Intermediate synoptic hours03, 09, 15, 21 UTC
Upper-air (radiosonde) main hours00 and 12 UTC
Indian Standard TimeUTC + 5 h 30 min, so 00 UTC = 05:30 IST and 03 UTC = 08:30 IST

Elements observed at a surface synoptic station:

ElementInstrument or methodReported as
Station pressure, then MSL pressureBarometer (aneroid or digital; mercury historically)hPa to 0.1
Pressure tendencyBarograph or successive readingschange over the past 3 h, with a characteristic symbol
Dry- and wet-bulb temperatureThermometers in a Stevenson screen about 1.25–2 m above ground°C; dew point and relative humidity derived
Maximum and minimum temperatureMax and min thermometers°C
WindAnemometer and wind vane, standard height 10 mdirection the wind blows from (degrees true) and speed (knots in synoptic codes)
RainfallRain gaugemm; in India the daily total is read at 03 UTC (08:30 IST)
CloudVisualtotal cover in oktas (eighths), type of low, middle and high cloud, base height
VisibilityVisual or visibility meterm or km
Present and past weatherVisualcode figures (ww 00–99 for present weather)

Automatic weather stations (AWS) report the measurable elements (pressure, temperature, humidity, wind, rain, radiation) at short intervals; they cannot report cloud type or many present-weather categories. Ships, moored and drifting buoys and Argo floats supply the oceans; commercial aircraft supply wind and temperature along flight routes and in ascent and descent profiles.

Upper-air observations

SystemWhat it givesNotes
RadiosondePressure, temperature, humidity profiles; wind when tracked (rawinsonde)Balloon-borne; tracked by GPS in modern sondes (earlier by radar or radio theodolite); ascends to burst, typically in the stratosphere
Pilot balloon (pibal)Wind onlyOptical theodolite tracking of a balloon with assumed ascent rate; fails in cloud
Wind profilerContinuous wind profileGround-based Doppler radar looking up
AircraftWind and temperatureDense along air routes and near airports
Satellite soundingsTemperature and humidity profiles from IR and microwave radiances; GPS radio occultationGlobal coverage; weaker vertical resolution near the surface

Weather radar

A pulse radar sends a short burst and times the echo: range \( r = c\,t/2 \). Doppler weather radars (DWR) also measure the phase shift between pulses, giving the radial velocity of the targets (towards or away from the radar, never across the beam).

QuantityDefinitionUse
Reflectivity factor \( Z \)\( Z = \sum D^6 \) per unit volume (mm⁶ m⁻³), quoted as dBZ \( = 10\log_{10} Z \)rainfall intensity, hail cores, storm structure
Z–R relation\( Z = aR^b \); Marshall–Palmer: \( Z = 200R^{1.6} \) (R in mm h⁻¹)quantitative precipitation estimation
Radial velocityfrom pulse-to-pulse phase changewind fields, mesocyclones, convergence lines
Maximum unambiguous range\( r_{max} = c/(2\,\mathrm{PRF}) \)echoes beyond it fold back (second-trip echoes)
Nyquist velocity\( v_N = \lambda\,\mathrm{PRF}/4 \)faster radial winds alias (fold)

The Doppler dilemma follows by multiplying the last two: \( r_{max}v_N = c\lambda/8 \). For a fixed wavelength you cannot raise both. A longer wavelength (S band, about 10 cm) helps; C band (about 5 cm) and X band (about 3 cm) radars are cheaper but attenuate more in heavy rain.

Weather satellites

FeatureGeostationaryPolar-orbiting (sun-synchronous)
Altitudeabout 35,800 km above the equatorseveral hundred km (typically around 800 km)
Coveragesame disc continuously; poor beyond about 60–70° latitudewhole globe in strips
Repeatimages every few minutes to half an houreach place about twice a day per satellite
Resolutioncoarserfiner; carries microwave sounders and imagers
Best fortracking cyclones, convection, cloud motion windssoundings, high-latitude imagery, microwave rain and SST

India’s geostationary meteorological satellites (the INSAT series) carry imagers and sounders; scatterometer missions give ocean surface winds.

ChannelWavelength (approx.)What it shows
Visibleabout 0.6 µmreflected sunlight; thick cloud bright; daytime only
Thermal IR windowabout 10.5–12.5 µmbrightness temperature of the cloud top or surface; colder = higher; works day and night
Water vapourabout 6.7 µmemission from mid-to-upper tropospheric moisture; dark = dry, so it reveals jet streams, troughs and dry intrusions even in clear air
MicrowaveGHz frequenciessees through non-precipitating cloud: rain, surface wind, sea-surface temperature, temperature profiles

Derived products used daily: atmospheric motion vectors (winds from tracked cloud and water-vapour features), outgoing longwave radiation (low OLR marks deep convection), sea-surface temperature, rainfall estimates and cyclone intensity by the Dvorak technique (see Tropical Weather Systems).


Coding and Plotting: The Station Model

Observations travel in WMO code forms: SYNOP (surface land station), SHIP, TEMP (radiosonde), PILOT (upper winds), METAR (aviation routine report). Exchange is moving to the table-driven binary format BUFR. On a chart each station’s report is plotted around the station circle in a fixed pattern.

PositionElementDecoding rule
Circle shadingTotal cloud coveroktas 0 (empty) to 8 (full); a cross means sky obscured
Shaft from circleWind directionpoints towards the direction the wind comes from
Barbs on the shaftWind speed (knots)full barb 10 kt, half barb 5 kt, pennant (triangle) 50 kt; a circle around the station = calm
Upper leftAir temperature°C
Lower leftDew point°C
Middle leftPresent weather symbole.g. dots = rain, commas = drizzle, asterisks = snow, ≡ = fog, a “Γ”-like arrow with dots = thunderstorm
Upper rightMSL pressurelast three digits in tenths of hPa: 132 → 1013.2 hPa; 987 → 998.7 hPa
Middle rightPressure tendencychange over 3 h in tenths of hPa, with a symbol for its shape
Below / aroundCloud types, visibility, past weatherstandard symbols

Pressure decoding rule: prefix 10 if the three digits are below about 500, and 9 if above. So 046 → 1004.6 hPa and 962 → 996.2 hPa.

Wind barb example: a shaft from the north-west with one pennant, two full barbs and one half barb is a north-westerly of 50 + 20 + 5 = 75 kt.


Analysing Surface and Upper-Air Charts

Surface (MSL) chart

  1. Reduce pressure to mean sea level. Station pressure is extrapolated down through a fictitious air column using the hypsometric equation and an assumed column temperature. Over high, hot or cold plateaus (Tibet, the Iranian plateau) this produces artificial highs and lows, so MSL isobars there are treated with caution.
  2. Draw isobars at a fixed interval (commonly 2 hPa in the tropics, 4 hPa in mid-latitudes). Isobars never cross or branch; they close around highs and lows; they are smooth.
  3. Locate systems: lows, highs, troughs (elongated lows), ridges (elongated highs), cols (saddle between two highs and two lows).
  4. Locate fronts in mid-latitudes from temperature and dew-point contrasts, wind shifts, pressure troughs and tendencies, and cloud and weather (see Air Masses, Fronts and Extratropical Cyclones).
  5. Check consistency with the previous chart (continuity) and with satellite and radar.

Buys Ballot’s law (Northern Hemisphere): stand with your back to the wind and low pressure is on your left. In the Southern Hemisphere it is on your right.

Geostrophic wind from isobar spacing. Outside the tropics, above the friction layer, the wind blows nearly parallel to the isobars with speed

$$V_g = \frac{1}{\rho f}\frac{\Delta p}{\Delta n}, \qquad f = 2\Omega\sin\phi,\ \ \Omega = 7.292\times10^{-5}\ \mathrm{s^{-1}}$$

Closer isobars mean stronger wind. Near the surface, friction makes the actual wind weaker than \( V_g \) and turns it across the isobars towards low pressure.

Upper-air (constant-pressure) charts

On an isobaric surface the analysed field is geopotential height \( Z \), drawn as contours. The geostrophic relation becomes

$$V_g = \frac{g}{f}\frac{\Delta Z}{\Delta n}$$

with no density, which is one reason isobaric charts are used aloft.

ChartApprox. height in the standard atmosphereTypical use
1000 hPanear sea level (about 0.1 km)surface-like analysis; thickness base
850 hPaabout 1.5 kmlow-level temperature and moisture advection; low-level jets; monsoon westerlies
700 hPaabout 3.0 kmmid-level moisture; steering of shallow systems
500 hPaabout 5.6 kmtroughs and ridges of the Rossby waves; steering of cyclones; vorticity
300 and 250 hPaabout 9.2 and 10.4 kmmid-latitude jet streams
200 hPaabout 11.8 kmsubtropical jet; tropical upper-level outflow; Tibetan anticyclone
100–150 hPaabout 16 km at 100 hPatropical easterly jet

Tropical heights are a little higher than these standard-atmosphere values because the tropical column is warmer.

Thickness charts

The thickness between two pressure levels depends only on the mean virtual temperature of the layer (hypsometric equation):

$$\Delta Z = Z_2 - Z_1 = \frac{R_d\,\bar{T}_v}{g}\ln\frac{p_1}{p_2}$$
  • A thickness ridge marks warm air, a thickness trough cold air. Thickness contours act as isotherms of the layer.
  • Wind blowing across thickness contours from high to low thickness is warm advection; the reverse is cold advection.
  • The thermal wind (vector difference of geostrophic winds between the two levels) blows parallel to the thickness contours with low thickness (cold air) on its left in the Northern Hemisphere.
  • In mid-latitudes the 5400 m (540 dam) 1000–500 hPa thickness line is used as a rough rain–snow guide; it corresponds to a layer-mean temperature of about 266 K.

Analysis in the tropics: streamlines and isotachs

Near the equator \( f \to 0 \), the Rossby number is large and pressure gradients are tiny (a few hPa across thousands of km), so isobars are a poor guide to the wind. Tropical forecasters therefore analyse the wind field directly:

  • Streamlines: lines everywhere parallel to the instantaneous wind.
  • Isotachs: lines of equal wind speed.
  • Singular points: cyclonic and anticyclonic circulation centres, cols (neutral points), and asymptotes of confluence (where streamlines converge, often along the ITCZ) or diffluence.

Over India, the 850 hPa and 200 hPa streamline charts show the monsoon westerlies below and the easterlies, including the tropical easterly jet, above (see The Southwest and Northeast Monsoon).

Thermodynamic diagrams

A radiosonde ascent is plotted on a thermodynamic diagram so that stability, cloud base and convective energy can be read graphically.

DiagramAxesEqual-area?Where used
TephigramT against ln θ (entropy)yesIndia, UK and Commonwealth services
Skew-T log-pT (skewed) against −ln papproximatelyUSA and many others
EmagramT against −ln pyesparts of Europe
StüveT against \( p^{R/c_p} \)noolder; dry adiabats straight lines

On each you find isobars, isotherms, dry adiabats (lines of constant θ), saturated adiabats (constant \( \theta_e \) or \( \theta_w \)) and saturation mixing-ratio lines. Equal area means an area enclosed on the diagram is proportional to energy, so CAPE can be estimated by counting area.

Normand’s rule: the lifting condensation level (LCL) lies where the dry adiabat through the surface temperature meets the saturation mixing-ratio line through the surface dew point. A handy estimate is

$$z_{LCL} \approx 125\,(T - T_d)\ \ \mathrm{m}$$

Other levels read from a sounding: convective condensation level (CCL), convective temperature (surface temperature needed for free convection from the CCL), level of free convection (LFC), equilibrium level (EL). The stability indices built from these are used in Weather Forecasting and Hazards.

Other analysis tools

  • Vertical cross-sections (height or pressure against distance) through fronts and jets.
  • Time sections (height against time at one station) to follow a passing trough.
  • Hodographs: wind vectors at successive heights joined tip to tip; curvature and length indicate vertical wind shear and storm type.
  • Isallobars: lines of equal pressure tendency; a strong isallobaric low tends to lie ahead of a moving low.

Memory Tricks

Don’t Confuse

ThisvsThat
Isobar on an MSL chart (constant pressure on a level surface)vsContour on a 500 hPa chart (constant height on a pressure surface)
Station pressure (measured)vsMSL pressure (reduced; artificial over plateaus)
Radiosonde: p, T, humidity (plus wind if tracked)vsPilot balloon: wind only
Visible image: albedo, daytime onlyvsIR image: cloud-top temperature, day and night
Water-vapour image: upper-tropospheric moisture, works in clear airvsIR window image: surface or cloud top
Reflectivity (how much is there)vsRadial velocity (how fast it moves along the beam)
Streamline (direction of the wind now)vsTrajectory (path of a parcel over time); equal only in steady flow
Thickness (layer-mean temperature)vsHeight of one surface (depends on all layers below it)
Tephigram (equal area, T vs ln θ)vsStüve (not equal area)

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. What are the four main synoptic hours?
  2. A station plots 046 for pressure. What is the MSL pressure?
  3. Which satellite channel shows moisture in the upper troposphere even in cloud-free air?
Answers
  1. 00, 06, 12 and 18 UTC.
  2. 1004.6 hPa (below 500, so prefix 10).
  3. The water-vapour channel, about 6.7 µm.

Level 2: Part B Style

Q1 (practice). On a 500 hPa chart at 45° N, height contours drawn at 60 m intervals are 300 km apart. Taking \( g = 9.81 \) m s⁻² and \( \Omega = 7.292\times10^{-5} \) s⁻¹, the geostrophic wind is closest to:

  • (a) 9.5 m s⁻¹
  • (b) 19 m s⁻¹
  • (c) 27 m s⁻¹
  • (d) 38 m s⁻¹
Answer and explanation

(b). \( f = 2\Omega\sin45^\circ = 1.031\times10^{-4} \) s⁻¹. \( V_g = \dfrac{g\,\Delta Z}{f\,\Delta n} = \dfrac{9.81\times60}{1.031\times10^{-4}\times3\times10^5} = 19.0 \) m s⁻¹.

Q2 (practice). A Doppler weather radar operates at a pulse repetition frequency of 1000 Hz and a wavelength of 10 cm. Its maximum unambiguous range and Nyquist velocity are:

  • (a) 150 km and 25 m s⁻¹
  • (b) 300 km and 25 m s⁻¹
  • (c) 150 km and 50 m s⁻¹
  • (d) 300 km and 12.5 m s⁻¹
Answer and explanation

(a). \( r_{max} = c/(2\,\mathrm{PRF}) = 3\times10^8/2000 = 1.5\times10^5 \) m = 150 km. \( v_N = \lambda\,\mathrm{PRF}/4 = 0.10\times1000/4 = 25 \) m s⁻¹. Halving the PRF would double the range to 300 km but halve \( v_N \) to 12.5 m s⁻¹, which is option (d)’s trap.

Q3 (practice). At night a forecaster sees a large area that is bright in a visible image taken just after sunrise but almost indistinguishable from the land in the IR image. The feature is most likely:

  • (a) a cirrus shield
  • (b) a cumulonimbus cluster
  • (c) fog or low stratus
  • (d) a dust plume at 500 hPa
Answer and explanation

(c). Fog and low stratus reflect strongly (bright in visible) but their tops are nearly as warm as the ground (grey in IR). Cirrus would be the reverse; cumulonimbus is bright in both.

Q4 (practice). Surface air temperature is 34 °C and dew point 24 °C. Using the standard approximation, the lifting condensation level is at about:

  • (a) 250 m
  • (b) 600 m
  • (c) 1250 m
  • (d) 2500 m
Answer and explanation

(c). \( z_{LCL} \approx 125(T - T_d) = 125\times10 = 1250 \) m. The approximation comes from the dry-adiabatic lapse rate (about 9.8 K km⁻¹) and the dew-point lapse rate (about 1.8 K km⁻¹) converging at about 8 K km⁻¹.

Level 3: Part C Style

Q1 (practice). Two nearby radiosonde ascents give the following 1000–500 hPa thicknesses: station P 5475 m, station Q 5272 m. Take \( R_d = 287 \) J kg⁻¹ K⁻¹ and \( g = 9.81 \) m s⁻². (i) Find the layer-mean temperature at each station. (ii) If P lies 500 km due south of Q at 45° N, find the magnitude and direction of the thermal wind in the layer. (iii) If the 1000 hPa geostrophic wind is from the south, is the region between the stations under warm or cold advection?

Answer and worked solution
  1. \( \bar{T} = \dfrac{g\,\Delta Z}{R_d\ln 2} \). P: \( 9.81\times5475/(287\times0.6931) = 270 \) K. Q: \( 9.81\times5272/(287\times0.6931) = 260 \) K.
  2. The thickness gradient is \( 203 \) m per 500 km, decreasing northward. Thermal wind \( V_T = \dfrac{g}{f}\dfrac{\Delta(\Delta Z)}{\Delta n} = \dfrac{9.81\times203}{1.031\times10^{-4}\times5\times10^5} \approx 38.6 \) m s⁻¹. Equivalently \( V_T = \dfrac{R_d}{f}\ln2\,\dfrac{\Delta\bar{T}}{\Delta n} \) with 10 K per 500 km, which gives the same 38.6 m s⁻¹. It blows from west to east (a westerly thermal wind), parallel to the thickness contours with cold air (Q) on the left.
  3. A southerly wind blows from high thickness (P, warm) towards low thickness (Q, cold): warm advection. With the thermal wind westerly, the wind must veer (turn clockwise) with height, the usual signature of warm advection in the Northern Hemisphere.

Q2 (practice). A C-band radar (λ = 5.3 cm) reports reflectivities of 30 dBZ, 40 dBZ and 55 dBZ in three parts of a storm. Use \( Z = 200R^{1.6} \).

(i) Compute the rain rates. (ii) The 55 dBZ core is observed at a height well above the freezing level and has a differential reflectivity near zero. What does this suggest? (iii) The operator wants to measure radial velocities up to 25 m s⁻¹ without folding. What PRF is needed, and what is the maximum unambiguous range then?

Answer and worked solution
  1. \( R = (Z/200)^{1/1.6} \) with \( Z = 10^{\mathrm{dBZ}/10} \):
    • 30 dBZ: Z = 1000 → R ≈ 2.7 mm h⁻¹
    • 40 dBZ: Z = 10⁴ → R ≈ 11.5 mm h⁻¹
    • 55 dBZ: Z ≈ 3.16 × 10⁵ → R ≈ 100 mm h⁻¹ (if it were rain)
  2. Very high Z above the freezing level with \( Z_{DR} \approx 0 \) (tumbling, nearly spherical targets rather than flattened raindrops) points to hail. The Z–R estimate there is meaningless; hail cores overestimate rain.
  3. \( \mathrm{PRF} = 4v_N/\lambda = 4\times25/0.053 \approx 1890 \) Hz. Then \( r_{max} = c/(2\,\mathrm{PRF}) = 3\times10^8/3774 \approx 79 \) km. A C-band radar cannot give both long range and high Nyquist velocity: the Doppler dilemma. Operational radars use dual-PRF schemes to unfold velocities.

Q3 (practice). Which of the following statements are correct?

(A) A pressure plotted as 962 on a station model means 996.2 hPa. (B) For the same pressure gradient, the geostrophic wind at 10° N is about three times that at 30° N. (C) A geostationary satellite gives a new image of the same scene every few minutes but cannot view the polar regions well. (D) On a tephigram the area between the parcel curve and the environmental curve is proportional to energy.

  • (a) A and C only
  • (b) A, C and D only
  • (c) A, B, C and D
  • (d) B and D only
Answer and worked solution

(c) A, B, C and D.

  • (A) 962 is above 500, so prefix 9: 996.2 hPa. Correct.
  • (B) \( V_g \propto 1/\sin\phi \): \( \sin30^\circ/\sin10^\circ = 0.5/0.174 = 2.88 \), about three times. Correct as arithmetic (which is exactly why geostrophy is not trusted in the low tropics). For example 4 hPa per 400 km with ρ = 1.2 kg m⁻³ gives 11.4 m s⁻¹ at 30° N and 32.9 m s⁻¹ at 10° N.
  • (C) Correct.
  • (D) The tephigram is an equal-area diagram. Correct.

Quick Revision Table

ItemFact
Synoptic hours00, 06, 12, 18 UTC main; 03, 09, 15, 21 intermediate; sondes 00 and 12 UTC
ISTUTC + 5:30
Windfrom direction; 10 m height; barb 10 kt, half 5 kt, pennant 50 kt
Cloud coveroktas 0–8
Pressure code3 digits, tenths; < 500 → 10xx.x; > 500 → 9xx.x
CodesSYNOP, SHIP, TEMP, PILOT, METAR; moving to BUFR
Geostrophic wind\( V_g = \Delta p/(\rho f\Delta n) = g\Delta Z/(f\Delta n) \)
Thickness\( \Delta Z = (R_d\bar{T}_v/g)\ln(p_1/p_2) \); 1000–500 hPa ≈ 20.3 m per K of mean T
Radar\( r_{max} = c/2\mathrm{PRF} \); \( v_N = \lambda\mathrm{PRF}/4 \); \( Z = 200R^{1.6} \); dBZ = 10 log Z
SatellitesGEO about 35,800 km, continuous; polar about 800 km, global, twice daily
ChannelsVIS albedo; IR cloud-top T; WV 6.7 µm upper moisture; microwave through cloud
Tropicsstreamlines and isotachs, not isobars
Diagramstephigram (T, ln θ, equal area); skew-T; emagram; Stüve not equal area
LCLNormand’s rule; \( z \approx 125(T - T_d) \) m

Key Takeaways

What’s Next