Well Logging
CSIR NET Earth Sciences Part C geophysics: open-hole, cased-hole and production logging, SP, resistivity, porosity logs, Archie saturation and LWD.
- 4
- Topics
- 87
- Min read
- 01 Logging Operations: Open-Hole, Cased-Hole, Production Logging and LWDStart here Borehole environment, invasion zones, open-hole and cased-hole suites, cement bond and pulsed-neutron logs, production logging and LWD for CSIR NET.
- 02 Electrical, SP and Temperature Logs Resistivity tools (normal, lateral, laterolog, induction, micro), invasion profiles, the SP and Rw, Arps correction and temperature logs for CSIR NET.
- 03 Porosity Logs: Sonic, Density, Neutron and Gamma Ray Sonic (Wyllie, Raymer), density and Pe, neutron hydrogen index, gas crossover, gamma ray, spectral GR and shale volume for CSIR NET Earth Sciences.
- 04 Formation Evaluation: Formation Factor, Porosity, Permeability, Saturation and Lithology Archie's formation factor and saturation equations, Rwa and Pickett plots, moveable hydrocarbons, log permeability and lithology crossplots for CSIR NET.
- Well Logging Short Notes Revise The whole chapter on one page.
Chapter Overview
Well Logging is a unit of the Geophysics section of Part C in CSIR NET Earth, Atmospheric, Ocean and Planetary Sciences (subject code 702). A well log is a continuous record, against depth, of a physical property of the rocks and fluids around a borehole. Logs are the main source of subsurface porosity, fluid saturation, lithology and correlation in petroleum, groundwater and mineral exploration, and they tie wells to seismic sections.
The unit is applied physics: electrochemistry for the SP, electromagnetism for resistivity and induction tools, nuclear physics for the gamma-ray, density and neutron tools, acoustics for the sonic, and heat conduction for temperature logs. It then becomes calculation: Archie’s equations turn resistivity and porosity into water saturation. Questions mix tool physics, log-pattern reading and short multi-step numericals.
What You’ll Learn
By the end of this chapter you will be able to:
- Describe the invasion profile and choose tools for open-hole, cased-hole and production logging, and for logging while drilling
- Explain laterolog and induction responses, read invasion from shallow and deep curves, and correct for temperature
- Derive \( R_w \) from the SP, explain its polarity and its reduction by shale
- Use temperature logs: gradients, Horner extrapolation, cement tops and fluid entries
- Compute porosity from sonic, density and neutron logs, detect gas and shale on a neutron–density overlay, and estimate shale volume from gamma ray
- Apply the formation factor and Archie’s equation, use \( R_{wa} \), Pickett plots and moveable-hydrocarbon checks
- Estimate permeability from logs and identify lithology from crossplots, Pe and M–N plots
- Analyse spinner, holdup and pulsed-neutron data for production and saturation monitoring
Prerequisites
- Reservoirs, traps and the exploration sequence: Petroleum Geology and Indian Basins
- Darcy’s law, porosity and surface resistivity methods: Hydrogeology: Darcy’s Law, Aquifers, Groundwater Exploration and Pollution
- Radioactivity and gamma emission: Radioactive Decay and Selection Rules
- Seismic velocities and the convolutional trace model: Seismology Basics and Earth’s Internal Structure and Signal Processing
Learning Path
The topics follow the order of the official syllabus lines, with logging while drilling taken together with the other acquisition modes:
graph TD
A["1. Logging Operations
open-hole, cased-hole,
production logging, LWD"] --> B["2. Electrical, SP and
Temperature Logs
Rt, Rxo, Rw, gradients"]
A --> C["3. Porosity Logs
sonic, density, neutron,
gamma ray"]
B --> D["4. Formation Evaluation
formation factor, Archie,
permeability, lithology"]
C --> D
D --> E["Quick Revision"]Topics in This Chapter
| # | Topic | What it covers | Time |
|---|---|---|---|
| 1 | Logging Operations: Open-Hole, Cased-Hole, Production Logging and LWD | wireline acquisition, borehole environment and invasion zones, tool–mud compatibility, open-hole suite, image and NMR logs, cased-hole GR/CCL, cement bond and VDL, pulsed-neutron sigma and C/O, production-logging tools, spinner and holdup analysis, MWD and LWD, telemetry, propagation resistivity, geosteering | 35 min |
| 2 | Electrical, SP and Temperature Logs | conduction in rocks, Arps correction, normal and lateral devices, laterolog and induction (series vs parallel), micro-resistivity, invasion profiles, SP origin and equation, polarity, shale reduction, \( R_w \) from SP, geothermal gradient and conductivity, Horner plot, uses of temperature logs | 35 min |
| 3 | Porosity Logs: Sonic, Density, Neutron and Gamma Ray | sonic principle, Wyllie and Raymer, secondary porosity, density and Pe, electron density, neutron and hydrogen index, matrix and gas effects, neutron–density overlay and crossover, gamma-ray physics, \( I_{GR} \) and Larionov, spectral GR, log shapes | 40 min |
| 4 | Formation Evaluation: Formation Factor, Porosity, Permeability, Saturation and Lithology | interpretation workflow, \( F = R_o/R_w = a/\phi^m \), Archie saturation, flushed zone and movability, ratio method, \( R_w \) and \( R_{wa} \), Pickett and Hingle plots, bulk volume water, shaly sands, log permeability (Timur, NMR, testers), crossplots, M–N and apparent-matrix plots, net pay | 40 min |
| — | Quick Revision | every formula, value and trap on one page | 10 min |
Official Syllabus Lines and Where They Are Covered
| Official topic line | Covered in |
|---|---|
| Open-hole, cased-hole, production logging | Logging Operations (all three modes, cement bond, pulsed neutron, spinner and holdup) |
| Electrical, SP, temperature logs | Electrical, SP and Temperature Logs; temperature in production logging also in Logging Operations |
| Porosity logs: sonic, density, neutron; gamma | Porosity Logs: Sonic, Density, Neutron and Gamma Ray |
| Formation factor, porosity, permeability, saturation, lithology | Formation Evaluation; porosity calculation from each tool in Porosity Logs |
| Logging while drilling | Logging Operations (MWD vs LWD, telemetry, propagation resistivity, comparison with wireline, geosteering) |
How CSIR NET Asks It
Per the NTA information bulletin for December 2026, Earth Sciences Part C has 80 questions, of which 25 are to be attempted, at 4 marks each with −1.32 for a wrong answer, a maximum of 100 marks (full table on the Earth Sciences overview). If more than 25 Part C questions are answered, only the first 25 answered are evaluated. The bulletin gives no count of questions per unit. From the syllabus wording, expect these kinds of question:
| Question type | Typical content | Where to practise |
|---|---|---|
| Tool physics | what each tool measures; source and interaction (Cs-137 and Compton scattering, Am-Be and hydrogen); series vs parallel resistivity response; origin of the SP | Level 1 and 2 on each page |
| Tool selection and conditions | oil-based mud, air-filled hole, cased hole; laterolog or induction; sigma or C/O | Logging Operations, Electrical logs |
| Log-pattern reading | invasion profiles; SP polarity; neutron–density crossover; CBL amplitude; GR shapes; temperature anomalies | Level 2 and 3 |
| One- and multi-step numericals | \( R_w \) from SSP; Arps; Horner; porosity from \( \Delta t \), \( \rho_b \), gas zones; \( I_{GR} \) and \( V_{sh} \); \( F \), \( R_o \), \( S_w \), \( R_{wa} \), \( S_{xo} \); Pickett slope; zone contributions; holdup; sigma saturation | Level 3 |
| Statement evaluation | assumptions of Archie and Wyllie; what the sonic misses; LWD vs wireline; shaly-sand errors | Level 3 |
Quick Reference
| Quantity | Value or formula |
|---|---|
| Archie | \( S_w^n = aR_w/(\phi^m R_t) \); \( F = R_o/R_w = a/\phi^m \) |
| SP | \( \text{SSP} = -K\log_{10}(R_{mf}/R_w) \), \( K \approx 65 + 0.24T(^\circ\text{C}) \) |
| Arps | \( R_2 = R_1(T_1 + 21.5)/(T_2 + 21.5) \) (°C) |
| Sonic (Wyllie) | \( \phi = (\Delta t - \Delta t_{ma})/(\Delta t_f - \Delta t_{ma}) \); 55.5, 47.5, 43.5, 189 µs/ft |
| Density | \( \phi = (\rho_{ma} - \rho_b)/(\rho_{ma} - \rho_f) \); 2.65, 2.71, 2.87 g/cm³ |
| Pe | sandstone 1.8, dolomite 3.1, limestone 5.1 |
| Gas porosity | \( \sqrt{(\phi_N^2 + \phi_D^2)/2} \) |
| GR index | \( (GR - GR_{\min})/(GR_{\max} - GR_{\min}) \) |
| Sigma | \( \Sigma = (1-\phi)\Sigma_{ma} + \phi S_w\Sigma_w + \phi(1-S_w)\Sigma_h \) |
| Spinner | \( Q = C v_a A \), \( C \approx 0.83 \) turbulent |
| Holdup | \( y_w = (\rho_m - \rho_o)/(\rho_w - \rho_o) \) |
Related chapters: Petroleum Geology and Indian Basins · Signal Processing · Hydrogeology
Start Learning
Begin with the first topic:
→ Logging Operations: Open-Hole, Cased-Hole, Production Logging and LWD