Skip to content

Chemistry and Materials in Everyday Life

CSIR NET Part A general science: air and water, acids, bases and pH, common compounds, rusting, combustion, solutions, soaps, polymers and dating.

  • 14 min read
  • Updated
On this page · 17 sections
  1. Prerequisites
  2. The Hook: Salt on the Road, Salt in the Pickle
  3. Air and Water
  4. Acids, Bases and pH
  5. Common Compounds and Their Names
  6. Oxidation, Rusting and Corrosion
  7. Combustion and Fuels
  8. Solutions, Mixtures and Colligative Effects
  9. Elements and Materials
  10. Radioactivity and Dating
  11. Memory Tricks
  12. Don’t Confuse
  13. Common Mistakes
  14. Practice
  15. Quick Revision Table
  16. Key Takeaways
  17. What’s Next

Prerequisites

The Hook: Salt on the Road, Salt in the Pickle

Air and Water

Composition of dry air (by volume, approximate)

GasShare
Nitrogen (N₂)about 78 %
Oxygen (O₂)about 21 %
Argon (Ar)about 0.9 %
Carbon dioxide (CO₂)about 0.04 %
Others (Ne, He, CH₄, …)traces

Water vapour is extra and variable, from almost nothing to a few per cent.

Water: the universal solvent

Water dissolves ionic and polar substances well because the molecule is polar and forms hydrogen bonds. Its high boiling point for so small a molecule, its high specific heat and its density maximum near 4 °C all come from hydrogen bonding.

Electrolysis of water gives hydrogen at the cathode and oxygen at the anode in a 2 : 1 volume ratio, matching the formula H₂O:

$$2\text{H}_2\text{O} \rightarrow 2\text{H}_2 + \text{O}_2$$

Hard water

TypeCaused byRemoved by
Temporary hardnesshydrogencarbonates (bicarbonates) of Ca²⁺ and Mg²⁺boiling (they decompose to insoluble carbonates); adding lime
Permanent hardnesschlorides and sulfates of Ca²⁺ and Mg²⁺washing soda, ion-exchange resins

Hard water wastes soap: Ca²⁺ and Mg²⁺ precipitate soap as an insoluble scum. Kettle “fur” is calcium carbonate left by boiling temporarily hard water.

Making water safe

  • Alum helps suspended particles clump and settle (coagulation).
  • Chlorination kills microbes.
  • Boiling kills most pathogens.

Acids, Bases and pH

$$\boxed{\text{pH} = -\log_{10}[\text{H}^+]}$$
  • At 25 °C, pure water has pH 7 (neutral); below 7 is acidic, above 7 basic.
  • One pH unit is a factor of ten in [H⁺]. pH 3 is 1000 times more acidic than pH 6.
SubstanceApproximate pH
Stomach acidabout 1–3
Lemon juiceabout 2
Vinegarabout 2.5–3
Unpolluted rainabout 5.6 (dissolved CO₂)
Pure water (25 °C)7
Human blood7.35–7.45
Sea waterabout 8
Baking soda solutionabout 8–9
Household ammoniaabout 11–12
Bleachabout 12–13

Rain with pH below about 5.6 is called acid rain; sulfur dioxide and nitrogen oxides from burning fuels are the main causes. It corrodes marble and limestone (calcium carbonate) and acidifies lakes.

Indicators

IndicatorIn acidIn base
Litmusredblue
Phenolphthaleincolourlesspink
Methyl orangeredyellow

Neutralisation in daily life

  • Antacids (magnesium hydroxide, sodium hydrogencarbonate) neutralise excess stomach acid.
  • An ant sting injects methanoic (formic) acid; a mild base such as baking soda soothes it.
  • Farmers add lime to acidic soil.

Common Compounds and Their Names

Common nameChemical nameFormulaUse
Common saltsodium chlorideNaClfood, raw material for NaOH and Cl₂
Baking sodasodium hydrogencarbonateNaHCO₃baking, antacid, fire extinguishers
Washing sodasodium carbonate decahydrateNa₂CO₃·10H₂Oremoving permanent hardness, cleaning
Caustic sodasodium hydroxideNaOHsoap-making
Bleaching powdercalcium oxychlorideCaOCl₂disinfecting water, bleaching
Plaster of Pariscalcium sulfate hemihydrateCaSO₄·½H₂Ocasts for fractures, moulds
Gypsumcalcium sulfate dihydrateCaSO₄·2H₂Ocement, plaster
Quicklimecalcium oxideCaOreacts vigorously with water
Slaked limecalcium hydroxideCa(OH)₂whitewash, soil treatment
Limestone, marble, chalkcalcium carbonateCaCO₃building, cement
Dry icesolid carbon dioxideCO₂refrigeration; sublimes
Laughing gasdinitrogen oxideN₂Oanaesthetic
Heavy waterdeuterium oxideD₂Omoderator in some nuclear reactors
  • Baking soda raises dough because on heating (or with an acid) it releases CO₂: \( 2\text{NaHCO}_3 \rightarrow \text{Na}_2\text{CO}_3 + \text{H}_2\text{O} + \text{CO}_2 \). Baking powder is baking soda mixed with a mild solid acid.
  • Plaster of Paris sets by taking up water and turning back into gypsum.
  • Whitewash shines because slaked lime slowly absorbs CO₂ from air and forms a thin coat of calcium carbonate.

Oxidation, Rusting and Corrosion

Oxidation is loss of electrons (or gain of oxygen); reduction is the reverse. They always happen together (redox).

Rusting of iron needs both oxygen and water. Rust is hydrated iron(III) oxide, \( \text{Fe}_2\text{O}_3 \cdot x\text{H}_2\text{O} \). Salt water and acid speed it up, which is why cars rust faster near the sea.

ProtectionHow it works
Paint, oil, greasekeeps out air and water
Galvanising (zinc coat)zinc is more reactive and corrodes first, protecting iron even where scratched
Tin platingtin is less reactive; protects only while the coat is unbroken
Alloying (stainless steel)chromium (with nickel) forms a protective oxide film
Cathodic protectiona block of a more reactive metal (e.g. magnesium) is sacrificed

Other metals: copper develops a green coating (basic copper carbonate), silver tarnishes black (silver sulfide), and aluminium is protected by a thin, tough oxide layer, which is why it does not crumble like rusted iron.

Combustion and Fuels

Burning needs three things, the fire triangle: fuel, oxygen and heat (to reach the ignition temperature). Remove any one and the fire goes out.

Extinguishing methodRemoves
Waterheat (cools below ignition temperature)
CO₂ extinguisher, sand, blanketoxygen (smothers)
Shutting off a gas valvefuel

Water should not be used on electrical fires (it conducts) or on burning oil (oil floats and spreads the fire). CO₂ is used instead.

  • Complete combustion of a hydrocarbon gives CO₂ and water. Limited air gives carbon monoxide, a poisonous gas that binds haemoglobin much more strongly than oxygen does.
  • LPG is mainly propane and butane; a strong-smelling sulfur compound is added so leaks can be detected, since the gas itself has almost no smell. CNG is mainly methane.
  • Burning methane: \( \text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O} \). 16 g of methane gives 44 g of CO₂.

Exothermic and endothermic

Exothermic (releases heat)Endothermic (absorbs heat)
combustion, respirationphotosynthesis
quicklime + waterdissolving ammonium nitrate (instant cold packs)
neutralisationmelting, evaporation

Solutions, Mixtures and Colligative Effects

Separating mixtures

MethodSeparatesExample
Filtrationinsoluble solid from liquidsand from water
Evaporation, crystallisationdissolved solid from solventsalt from sea water
Distillationliquids with different boiling pointspurifying water
Chromatographycomponents that move at different ratespigments in ink or leaves
Centrifugationparticles by densitycream from milk
Sublimationa subliming solid from otherscamphor, naphthalene, iodine

Solubility

Most solids dissolve better in hot water. Gases dissolve less in warm water: a warm soft drink goes flat faster, and warm water holds less oxygen for fish. Pressure increases gas solubility, so a sealed soda bottle fizzes when opened.

Colligative properties

These depend on the number of dissolved particles, not their identity.

EffectEveryday example
Freezing-point depressionsalt on icy roads; ice + salt to freeze ice-cream; antifreeze in car radiators
Boiling-point elevationsalted water boils slightly above 100 °C
Osmosis (water moves to the more concentrated side through a semi-permeable membrane)pickles and salted fish resist microbes; raisins swell in water; red cells burst in pure water

Osmosis in cells is taken further on the Life and Health Science page.

Soaps and detergents

A soap is the sodium or potassium salt of a long-chain fatty acid, made by heating fat with alkali (saponification). Each molecule has a water-loving ionic head and an oil-loving hydrocarbon tail. In water they form micelles: tails inward around a drop of grease, heads outward, so the grease is carried away.

Soap forms scum with hard water; synthetic detergents do not, so they work in hard water.

Elements and Materials

Quick facts about elements

FactElement
Most abundant in Earth’s crust (by mass)oxygen, then silicon
Most abundant in the universehydrogen, then helium
Most abundant gas in airnitrogen
Metal liquid at room temperaturemercury
Non-metal liquid at room temperaturebromine
Metal that melts in the hand (about 30 °C)gallium
Used in balloons (light, non-flammable)helium

Noble gases are unreactive: argon fills incandescent bulbs, neon glows red in signs.

Carbon’s allotropes

AllotropeStructureProperty
Diamondeach C bonded to four others in 3-Dhardest natural substance; electrical insulator
Graphiteflat layers of hexagonssoft, slippery (lubricant, pencils); conducts electricity
Fullerene (C₆₀)hollow cagemolecular form of carbon
Graphenesingle graphite layervery strong; excellent conductor

Polymers

  • Natural: cellulose, starch, proteins, natural rubber, DNA.
  • Synthetic: polythene, PVC, nylon, polyester, Teflon.
  • Thermoplastics soften on heating and can be remoulded (polythene, PVC); thermosets set permanently (Bakelite, used in switches and handles).
  • Vulcanisation cross-links rubber with sulfur, making it harder and more durable (tyres).

Radioactivity and Dating

Isotopes have the same atomic number but different mass numbers (carbon-12, carbon-13, carbon-14). Radioactive isotopes decay with a fixed half-life.

$$\boxed{N = N_0\left(\tfrac{1}{2}\right)^{t/T_{1/2}}}$$

Radiocarbon dating: living things keep taking up carbon-14; after death the carbon-14 decays with a half-life of about 5730 years. If a sample has \( \tfrac{1}{8} \) of the carbon-14 of living tissue, three half-lives have passed: about 17 000 years. The method works for once-living material up to some tens of thousands of years; older rocks are dated with longer-lived isotopes. (The Earth Sciences chapter covers radiometric dating in detail.)

Memory Tricks

Don’t Confuse

ThisvsThat
Baking soda, NaHCO₃washing soda, Na₂CO₃·10H₂O
Quicklime, CaOslaked lime, Ca(OH)₂
Plaster of Paris, ½H₂Ogypsum, 2H₂O
Temporary hardness (bicarbonates)permanent hardness (chlorides, sulfates)
Galvanising (zinc, sacrificial)tin plating (barrier only)
Solids: more soluble when hotgases: less soluble when hot
Isotopes: same Z, different Aisobars: same A, different Z

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Give the formula of baking soda.
  2. What is the pH of pure water at 25 °C?
  3. Which gas makes up the largest share of dry air?
Answers
  1. NaHCO₃ (sodium hydrogencarbonate).
  2. 7.
  3. Nitrogen, about 78 % by volume.

Level 2: Part A Style

Practice Q1. The hydrogen-ion concentration of a solution of pH 3 is how many times that of a solution of pH 6?

(a) 2 (b) 3 (c) 100 (d) 1000

Answer: (d) 1000

\( [\text{H}^+] = 10^{-\text{pH}} \). Ratio \( = 10^{-3}/10^{-6} = 10^3 \). Option (a) reads pH as linear.

Practice Q2. Water with hardness caused by calcium hydrogencarbonate can be softened simply by:

(a) filtering (b) boiling (c) adding common salt (d) chlorinating

Answer: (b) boiling

On boiling, \( \text{Ca(HCO}_3)_2 \rightarrow \text{CaCO}_3 \downarrow + \text{H}_2\text{O} + \text{CO}_2 \). The carbonate precipitates (kettle fur). This is temporary hardness.

Practice Q3. In the electrolysis of acidified water, the volumes of hydrogen and oxygen collected are in the ratio:

(a) 1 : 1 (b) 1 : 2 (c) 2 : 1 (d) 8 : 1

Answer: (c) 2 : 1

\( 2\text{H}_2\text{O} \rightarrow 2\text{H}_2 + \text{O}_2 \). Equal volumes of gases hold equal numbers of molecules, so 2 : 1. Option (d) is the oxygen-to-hydrogen mass ratio (32 : 4), not a volume ratio.

Practice Q4. Salt is spread on icy roads because it:

(a) raises the boiling point of water (b) lowers the freezing point of water (c) reacts exothermically with ice (d) increases friction only

Answer: (b) lowers the freezing point of water

Dissolved ions depress the freezing point (a colligative effect), so ice in contact with salt melts at temperatures a little below 0 °C.

Level 3: Multi-Step (Part C depth)

Practice Q5. A solution of hydrochloric acid has pH 2. Consider the statements:

  1. Diluting it 100-fold with pure water gives pH 4.
  2. Diluting it a million-fold gives pH 8.
  3. Its [H⁺] is 100 times that of a solution of pH 4.
  4. Adding excess sodium hydroxide can raise its pH above 7.

Which are correct?

(a) 1 and 3 only (b) 1, 3 and 4 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 3 and 4 only
  1. [H⁺] falls from \( 10^{-2} \) to \( 10^{-4} \) M. Correct.
  2. Dilution alone cannot make an acid basic; the pH approaches 7 from below. Wrong.
  3. \( 10^{-2}/10^{-4} = 100 \). Correct.
  4. Once the acid is neutralised, any extra strong base makes the solution basic. Correct. (Adding a base is a reaction, not a dilution, so statement 2’s limit does not apply.)

Practice Q6. A piece of charcoal from an ancient hearth has one-eighth of the carbon-14 activity of fresh wood. Taking the half-life of carbon-14 as 5730 years, its age is closest to:

(a) 5700 years (b) 11 500 years (c) 17 200 years (d) 45 800 years

Answer: (c) 17 200 years

\( \tfrac{1}{8} = \left(\tfrac{1}{2}\right)^3 \): three half-lives, \( 3 \times 5730 = 17\,190 \) years. Option (d) multiplies by 8 instead of using the exponent.

Practice Q7. Consider these statements about corrosion:

  1. A galvanised iron bucket keeps resisting rust even where the zinc coat is scratched.
  2. A tin-plated iron can, once scratched, rusts at the scratch.
  3. Iron nails kept in boiled water sealed under a layer of oil do not rust readily.
  4. Rust is anhydrous iron(II) oxide.

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  1. Zinc is more reactive than iron and corrodes sacrificially. Correct.
  2. Tin is less reactive than iron; at a scratch the exposed iron corrodes. Correct.
  3. Boiling removes dissolved air and oil stops it re-entering; without oxygen, rusting is very slow. Correct.
  4. Rust is hydrated iron(III) oxide. Wrong.

Practice Q8. When 32 g of methane burns completely in oxygen (C = 12, H = 1, O = 16), the mass of carbon dioxide formed is:

(a) 44 g (b) 64 g (c) 88 g (d) 128 g

Answer: (c) 88 g

\( \text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O} \). 32 g CH₄ is 2 mol, giving 2 mol CO₂ \( = 2 \times 44 = 88 \) g. Option (d) is the mass of oxygen consumed (4 mol × 32 g).

Quick Revision Table

IdeaFact
Dry airN₂ ≈ 78 %, O₂ ≈ 21 %, Ar ≈ 0.9 %, CO₂ ≈ 0.04 %
pH\( -\log[\text{H}^+] \); one unit = ×10; neutral 7 at 25 °C
Clean rain / blood≈ 5.6 / 7.35–7.45
Electrolysis of waterH₂ : O₂ = 2 : 1 by volume
Hardnesstemporary (bicarbonates, boil); permanent (Cl⁻, SO₄²⁻)
Rustingneeds O₂ + H₂O; rust = Fe₂O₃·xH₂O
Galvanisingzinc, sacrificial; works even if scratched
Fire trianglefuel, oxygen, heat
Gas solubilityfalls with temperature, rises with pressure
Colligativefreezing point down, boiling point up, osmosis
SoapNa/K salt of fatty acid; micelles; scum in hard water
Carbon-14half-life ≈ 5730 y

Key Takeaways

What’s Next

Advertisement
Advertisement