Skip to content

Marine and Environmental Biotechnology

Marine natural products, biofilms, wastewater treatment, biofertilizers, biopesticides, biofuels, bioremediation and phytoremediation for CSIR NET.

  • 34 min read
  • Updated
On this page · 11 sections
  1. Prerequisites
  2. The Hook: Two Kinds of Dilute
  3. Part 1: Marine Biotechnology
  4. Part 2: Environmental Biotechnology
  5. Memory Tricks
  6. Don’t Confuse
  7. Common Mistakes
  8. Practice
  9. Quick Revision Table
  10. Key Takeaways
  11. What’s Next

Prerequisites

The Hook: Two Kinds of Dilute

How CSIR NET asks it. Part B: which organism gives which product, biofilm stages and the role of EPS, the stages of wastewater treatment and what each removes, BOD vs COD, biofertilizer organism–crop pairings, the four steps of anaerobic digestion, biofuel generations, bioaugmentation vs biostimulation, phytoremediation categories. Part C: BOD/COD and removal-efficiency arithmetic, F/M, SRT, HRT and SVI calculations, C/N mixing for a digester, ethanol and hydrogen yields against theoretical maxima, interpreting field biostimulation data, and phytoextraction mass balances.


Part 1: Marine Biotechnology

Why the sea

The oceans cover about 70% of the planet and hold habitats that have no terrestrial equivalent — hydrothermal vents, cold seeps, the deep abyss, polar sea ice, hypersaline basins. Three consequences matter for biotechnology:

  1. Chemical novelty. Many marine invertebrates are soft-bodied, sessile and defenceless, so they rely on chemistry. Their metabolites are unusual (halogenated, highly oxygenated, peptide-rich) and often potent.
  2. Genetic novelty. Most marine microbial diversity has never been cultured, so metagenomics and single-cell genomics, not culture collections, are the main route to its genes.
  3. Extremozymes. Cold-active, salt-tolerant, pressure-tolerant and thermostable enzymes come from organisms adapted to those conditions — thermostable DNA polymerases underpin PCR, and some high-fidelity enzymes (Pfu, Vent) come from marine hyperthermophilic archaea of hydrothermal vents.
GroupRepresentative biotechnological value
MacroalgaeAgar and agarose (Gelidium, Gracilaria), carrageenan (Chondrus, Kappaphycus), alginate (brown algae such as Laminaria); food, feed and hydrocolloids
Microalgae and diatomsβ-carotene (Dunaliella salina), omega-3 (EPA/DHA) from Schizochytrium and relatives, pigments, lipids for biodiesel, feed for aquaculture
CyanobacteriaArthrospira (“spirulina”) as food/feed protein; a rich source of bioactive peptides and polyketides
Marine bacteria and actinomycetesAntibiotics and cytotoxins; the marine actinomycete genus Salinispora yielded salinosporamide A, a proteasome inhibitor taken into clinical study
Archaea (vents, deep sea)Thermostable polymerases (e.g. Pfu, Vent) and other extremozymes
Invertebrates (sponges, tunicates, molluscs, bryozoans, cnidarians)The great majority of marine natural-product leads
JellyfishGFP from Aequorea victoria — the reporter that transformed cell biology (2008 Chemistry Nobel: Shimomura, Chalfie, Tsien)
Crustacean processing wasteChitin and chitosan — films, flocculants, wound dressings, delivery systems

Marine natural products and pharmacology

Established, well-documented examples only:

ProductMarine originAction / use
Cytarabine (ara-C) and vidarabine (ara-A)Developed from the unusual arabinosyl nucleosides (spongothymidine, spongouridine) found in a Caribbean spongeNucleoside analogues; cytarabine is a long-established antileukaemic agent
ZiconotideA synthetic version of ω-conotoxin MVIIA from the cone snail Conus magusBlocks N-type (Cav2.2) voltage-gated calcium channels; intrathecal analgesic for severe chronic pain
Trabectedin (ET-743)Originally from the tunicate Ecteinascidia turbinata; now made semisyntheticallyDNA-minor-groove binder used in soft-tissue sarcoma
EribulinA synthetic analogue of halichondrin B from the sponge Halichondria okadaiMicrotubule dynamics inhibitor
Monomethyl auristatin E (in antibody–drug conjugates)A synthetic analogue of dolastatin 10, originally from the sea hare Dolabella auricularia (and traced to a cyanobacterium)Tubulin-binding cytotoxic payload delivered by an antibody
Omega-3 fatty acid preparationsFish and microalgal oilsLipid-lowering and nutritional use

Research tools matter as much as drugs: tetrodotoxin and saxitoxin are the classic voltage-gated sodium-channel blockers, okadaic acid (from a dinoflagellate, concentrated in sponges) is the standard serine/threonine phosphatase (PP1/PP2A) inhibitor, and conotoxins are used as subtype-selective channel probes. Much of what is known about ion channels was established with marine toxins.

Biofilms

A biofilm is a surface-attached microbial community embedded in a self-produced matrix of extracellular polymeric substances (EPS). Most microbial life in nature is in biofilms, not free-swimming.

graph LR
    A["Conditioning film
organic molecules adsorb
to the clean surface"] --> B["1. Reversible attachment
planktonic cells, flagella,
weak forces"] B --> C["2. Irreversible attachment
adhesins, pili, EPS begins;
motility genes switched off"] C --> D["3. Microcolony formation
division + recruitment;
c-di-GMP high"] D --> E["4. Maturation
3D architecture, water channels,
gradients, quorum sensing"] E --> F["5. Dispersal
matrix degradation, motility restored,
cells seed new surfaces"]
ElementDetail
EPS compositionExopolysaccharides, proteins (including adhesins and amyloid fibres), extracellular DNA, lipids; typically the great majority of the biofilm’s dry mass and almost all its volume
Functions of the matrixMechanical stability, adhesion, water retention, nutrient capture, protection from phagocytes and biocides, a scaffold for enzymes, retention of extracellular DNA for horizontal gene transfer
Regulationc-di-GMP is the key intracellular second messenger: high levels favour the sessile, matrix-producing state, low levels favour motility. Quorum sensing (AHLs in Gram-negatives, autoinducing peptides in Gram-positives, AI-2 across species) coordinates maturation and dispersal
Internal gradientsOxygen, nutrient and pH gradients create physiological heterogeneity — active cells at the surface, slow-growing and dormant cells deeper
Drug behaviourBiofilms show tolerance, not (necessarily) resistance: slow penetration through the matrix, slow growth, and many persisters mean the MIC of the dispersed cells can be unchanged. The distinction is on the AMR page

Biofouling is the unwanted colonisation of submerged surfaces, and it follows a succession:

  1. Conditioning film of adsorbed organics (within minutes to hours)
  2. Microfouling — bacteria, then diatoms, forming a slime layer (hours to days)
  3. Macrofouling — algal spores and invertebrate larvae settling, then barnacles, mussels, tubeworms, bryozoans and macroalgae (weeks onward)

Costs: increased hull drag and fuel consumption, blocked pipes and heat exchangers, microbially influenced corrosion, and the transport of invasive species on hulls and in ballast water. Control: antifouling coatings — organotin (TBT) paints were effective and are now prohibited internationally because of their environmental toxicity, leaving copper-based paints, foul-release silicone coatings, mechanical cleaning, and research approaches such as natural antifoulants and quorum-quenching enzymes.

Beneficial biofilms are everywhere in environmental biotechnology: trickling filters, rotating biological contactors, moving-bed biofilm reactors, biofilters for odour and VOCs, anaerobic granules in UASB reactors, and the anodic biofilms of microbial fuel cells.


Part 2: Environmental Biotechnology

Characterising a wastewater

ParameterMeaning
BOD (usually BOD₅ at 20 °C)Oxygen consumed by microorganisms oxidising biodegradable organics in a fixed incubation; a biological measure, takes days
CODOxygen equivalent of all chemically oxidisable matter (dichromate digestion); fast, always ≥ BOD, includes non-biodegradable matter
TOCTotal organic carbon, by combustion
TSS / VSSTotal and volatile suspended solids
BOD/COD ratioBiodegradability index: roughly > 0.5 readily biodegradable, < 0.3 poorly biodegradable (needs physico-chemical treatment or acclimated cultures)
$$\text{Removal efficiency (\%)} = \frac{S_{\text{in}} - S_{\text{out}}}{S_{\text{in}}} \times 100$$

Stages of treatment

StageOperationsRemoves
PreliminaryScreening, grit removal, oil and grease skimmingRags, grit, floatables
PrimaryPlain sedimentation (sometimes chemically assisted)Most settleable solids and a modest share of BOD (typically about a quarter to two-fifths), chiefly the particulate fraction
Secondary (biological)Activated sludge, trickling filter, rotating biological contactor, oxidation ponds/lagoons, UASBThe bulk of soluble and colloidal BOD; the biomass produced is then settled out
Tertiary / advancedNutrient removal (nitrification–denitrification for N, biological or chemical P removal), filtration, membranes, adsorption, disinfection (chlorine, UV, ozone)Nutrients, residual solids and organics, pathogens

Activated sludge, quantitatively

An aeration tank plus a secondary clarifier, with return activated sludge recycling biomass and waste activated sludge setting the sludge age.

QuantityFormulaTypical meaning
HRT\(\theta = V/Q\)Hours; how long the liquid stays
SRT (sludge age, MCRT)\(\theta_c = VX / (Q_w X_r)\)Days; how long the biomass stays — set independently of HRT, which is the whole point of recycle
F/M ratio\(F/M = Q S_0 / (V X)\)kg BOD per kg MLSS per day; the organic loading per unit of biomass
MLSS / MLVSS—Mixed-liquor (volatile) suspended solids, i.e. the biomass concentration \(X\)
SVI\(\text{SVI} = \dfrac{\text{settled sludge volume (mL/L)} \times 1000}{\text{MLSS (mg/L)}}\)mL/g; settleability. Low values settle well, high values indicate bulking

Operating problems to recognise:

  • Filamentous bulking — filamentous organisms overgrow at low F/M, low dissolved oxygen or nutrient deficiency; SVI rises and sludge carries over into the effluent.
  • Foaming — hydrophobic, filamentous actinomycete-like organisms (e.g. Nocardia-type) give stable brown foam.
  • Rising sludge — denitrification in the clarifier produces N₂ bubbles that float settled sludge.
  • Pin-point floc and deflocculation — at very high F/M or after toxic shock.

Nitrogen removal is two-step and sequential: aerobic nitrification by autotrophs (ammonia → nitrite by Nitrosomonas-type organisms, nitrite → nitrate by Nitrobacter-type organisms; these are slow growers, so nitrification needs a long SRT) followed by anoxic denitrification by heterotrophs reducing nitrate to N₂ with an organic electron donor. Anammox organisms combine ammonium and nitrite directly to N₂ and are exploited for high-ammonia, low-carbon streams. Biological phosphorus removal uses polyphosphate-accumulating organisms cycled between anaerobic and aerobic zones.

Attached growth and anaerobic treatment

Trickling filter: wastewater is distributed over a bed of rock or plastic media carrying a biofilm (the “zoogleal film”); air moves through the voids. Low energy, robust, tolerant of shock loads, but less controllable and with more sloughing than activated sludge. Nitrifiers dominate the lower, low-BOD depths.

Anaerobic digestion proceeds in four microbial steps:

graph TD
    A["Complex polymers
carbohydrates, proteins, lipids"] -->|"1. Hydrolysis
extracellular enzymes"| B["Sugars, amino acids,
long-chain fatty acids"] B -->|"2. Acidogenesis
fermentative bacteria"| C["Volatile fatty acids,
alcohols, H2, CO2"] C -->|"3. Acetogenesis
syntrophic acetogens;
needs low H2"| D["Acetate, H2, CO2"] D -->|"4a. Acetoclastic
methanogens"| E["CH4 + CO2"] D -->|"4b. Hydrogenotrophic
methanogens"| E
FeatureValue / note
Biogas compositionMostly methane with carbon dioxide — roughly half to three-quarters CH₄ — plus traces of H₂S, water vapour and N₂
Temperature regimesMesophilic around 35 °C (stable, common) and thermophilic around 55 °C (faster, better pathogen reduction, more sensitive)
Optimal C/N of feedAbout 20–30 : 1. Too low (N-rich, e.g. poultry litter) → ammonia inhibition; too high (C-rich, e.g. straw) → N limitation. Mixing feedstocks (“co-digestion”) is the usual fix
pHNear neutral; a drop signals VFA accumulation outrunning methanogenesis
SyntrophyAcetogens are thermodynamically feasible only if methanogens keep H₂ partial pressure low — interspecies hydrogen transfer. This coupling is why digesters fail “from the methanogen end”
Reactor typesCSTR digesters, plug-flow, UASB (self-granulating sludge, high loading), anaerobic filters and membrane reactors
Why anaerobicProduces energy instead of consuming it, and yields far less sludge than aerobic treatment; slower, and poorer effluent quality, so it is often followed by aerobic polishing

Biofertilizers

OrganismRelationshipCrop / use
Rhizobium / Bradyrhizobium / MesorhizobiumSymbiotic, forms root nodules; nif genes, leghaemoglobin buffers O₂Legumes, with host specificity (cross-inoculation groups)
FrankiaSymbiotic actinobacterium, actinorhizal nodulesCasuarina, Alnus and other non-legume trees
AzotobacterFree-living aerobic diazotrophBroad-spectrum soil inoculant; also makes growth substances
AzospirillumAssociative (rhizosphere/root surface), microaerophilicCereals, millets, sugarcane
Cyanobacteria (Nostoc, Anabaena), Azolla–Anabaena azollaeFree-living and symbiotic; heterocysts fix N₂Flooded rice
Acetobacter diazotrophicus (Gluconacetobacter)EndophyticSugarcane
Mycorrhiza — arbuscular (AM/endo)Obligate symbiosis (Glomeromycota); hyphae penetrate cortical cells forming arbuscules and vesiclesMassive extension of the absorbing surface; chiefly phosphorus uptake, plus Zn, Cu, water and stress tolerance
Mycorrhiza — ectomycorrhizaFungal mantle around the root plus a Hartig net between cells; no intracellular penetrationPines, oaks, Eucalyptus
Phosphate-solubilising bacteria/fungi (PSB) — Bacillus, Pseudomonas, AspergillusFree-livingSecrete organic acids (gluconic, citric) that dissolve Ca/Fe/Al phosphates, plus phosphatases for organic P
Potassium and zinc mobilisers; PGPR generallyFree-livingNutrient mobilisation plus hormones, siderophores and induced resistance

Formulation matters as much as the organism: a carrier (lignite, charcoal, peat, or liquid and granular formulations), a guaranteed viable count, and an honest shelf life. Biofertilizers supplement fertiliser; they do not replace it at high yield targets.

Biopesticides

AgentTypeMode of action
Bacillus thuringiensis formulationsBacterialCry protoxins solubilised and activated in the alkaline insect midgut, bound to specific midgut receptors, forming pores. Subspecies differ in which insects they affect — kurstaki for caterpillars, israelensis for mosquito and black-fly larvae
Trichoderma harzianum / T. virideFungal antagonistMycoparasitism (coiling, lytic chitinases and glucanases), antibiosis, competition for space and nutrients, and induced systemic resistance in the plant; also growth promotion
Pseudomonas fluorescensBacterial antagonistSiderophores (iron competition), antibiotics, induced systemic resistance
Beauveria bassiana, Metarhizium anisopliaeEntomopathogenic fungiSpores adhere to and penetrate the insect cuticle enzymatically, then proliferate internally; humidity-dependent
Paecilomyces lilacinus, PurpureocilliumNematophagous fungusEgg and juvenile parasitism of plant-parasitic nematodes
Nucleopolyhedroviruses (NPV) — as a conceptInsect baculovirusesInsect baculoviruses used as biocontrol agents; the exam interest is their narrow target-insect spectrum and their place in integrated pest management, nothing more. Consult a standard microbiology text for detail
Neem — azadirachtinBotanicalAntifeedant, repellent, oviposition deterrent and insect growth regulator interfering with moulting; broad activity, low mammalian toxicity
Pheromones and semiochemicalsBehaviouralMonitoring, mass trapping, mating disruption
Parasitoids and predators (Trichogramma, coccinellids)Macrobial biocontrolEgg parasitism and predation

Biopesticides are specific and environmentally benign but act slowly, are sensitive to UV, temperature and formulation, and have short shelf lives — which is why they fit IPM rather than replacing chemicals outright.

Biofuels

GenerationFeedstockIssue
FirstSugar and starch crops (sugarcane, maize, molasses); vegetable oil for biodieselMature and cheap, but competes with food and land
SecondLignocellulosic residues — straw, bagasse, wood, energy grassesNo food competition, but needs pretreatment (steam explosion, dilute acid, alkali) to open lignin–hemicellulose, costly cellulases, and fermentation of pentoses (xylose), which wild S. cerevisiae cannot use. Process options: SHF, SSF, and consolidated bioprocessing (CBP)
ThirdMicroalgaeVery high areal productivity and no arable land needed; limited by harvesting and dewatering energy, lipid extraction cost and contamination
FourthEngineered organisms and carbon-capture-coupled routesMostly conceptual at scale

Bioethanol. The alcoholic fermentation of glucose is

$$\mathrm{C_6H_{12}O_6 \rightarrow 2\,C_2H_5OH + 2\,CO_2}$$

so the theoretical (Gay-Lussac) yield is

$$\frac{2 \times 46.07}{180.16} = 0.511\ \text{g ethanol per g glucose} \qquad (\text{and } 0.489\ \text{g CO}_2)$$

Real fermentations reach roughly 90–95% of this. Saccharomyces cerevisiae ferments hexoses; Zymomonas mobilis uses the Entner–Doudoroff route and gives a higher ethanol yield per glucose than yeast because it makes less biomass; engineered strains add xylose and arabinose utilisation. India’s Ethanol Blended Petrol programme set a 20% blending target, with the timeline advanced to the mid-2020s — quote the current notification rather than a remembered year.

Biodiesel is made by transesterification: triglyceride + 3 methanol → 3 fatty acid methyl esters (FAME) + glycerol, catalysed by KOH/NaOH (alkali, fast, needs low free fatty acid feed), acid (tolerates FFA), or lipase (mild, expensive, tolerant). Feedstocks: non-edible oils (Jatropha, Pongamia), used cooking oil, animal fats, algal lipids. Key fuel properties are cetane number, viscosity and cloud/pour point; glycerol is the major co-product.

Biogas is anaerobic digestion applied as an energy technology — in India through family-sized and community plants (floating-drum and fixed-dome designs) and increasingly as compressed biogas from agricultural and municipal waste.

Biohydrogen

RouteOrganismsLimit
Direct biophotolysisGreen algae (Chlamydomonas) — hydrogenase linked to photosynthetic electron transportHydrogenase is severely O₂-sensitive; sulfur deprivation is used to suppress O₂ evolution temporarily
Indirect biophotolysisCyanobacteria — carbon fixed in the light, H₂ released in a separate phase, often via nitrogenaseSeparates O₂ and H₂ production in time; low rates
PhotofermentationPurple non-sulfur bacteria (Rhodobacter) on organic acids, using nitrogenaseHigh theoretical conversion, poor light-conversion efficiency
Dark fermentationClostridium, EnterobacterNo light needed and fast, but the stoichiometric ceiling is 4 mol H₂ per mol glucose on the acetate route (2 mol on the butyrate route); real yields are well below this, and the leftover acids need a second stage (methanogenesis or photofermentation)
Microbial electrolysis cellsAnodic biofilm + small applied voltageOvercomes the fermentation barrier; still developmental

Bioremediation

Bioremediation uses organisms to destroy, transform or immobilise contaminants.

ApproachWhereExamples
In situTreat in place; cheaper, less disruptive, slower, harder to controlNatural attenuation (monitored), biostimulation, bioaugmentation, bioventing (air to the unsaturated zone), biosparging (air below the water table), permeable reactive barriers, phytoremediation
Ex situExcavate or pump, then treat; faster and controllable, costlyLandfarming, biopiles, composting, slurry-phase bioreactors, constructed beds

What is treatable, and how

Contaminant classBiology
Petroleum hydrocarbonsAerobic degradation by Pseudomonas, Rhodococcus, Acinetobacter and the obligate hydrocarbonoclastic Alcanivorax; alkane monooxygenases and ring dioxygenases. Degradability falls: n-alkanes > branched > low-ring aromatics > cycloalkanes > high-ring PAHs > asphaltenes
PAHsDioxygenase ring attack; high-molecular-weight PAHs are slow and bioavailability-limited (sorption to soil organic matter)
PCBsHighly chlorinated congeners are dechlorinated anaerobically (reductive dechlorination); the lower-chlorinated products are then mineralised aerobically via biphenyl dioxygenase — hence sequential anaerobic–aerobic treatment
Chlorinated solvents (TCE, PCE)Anaerobic reductive dechlorination to ethene by Dehalococcoides-type organisms (incomplete dechlorination stalls at toxic vinyl chloride); aerobic co-metabolism by methanotrophs via soluble methane monooxygenase
Pesticides, explosives, dyes, surfactantsVariable; often co-metabolic, often requiring acclimated consortia
PlasticsEnzymatic hydrolysis of polyesters — the Ideonella sakaiensis PET hydrolase and engineered variants are the active research front
Metals and metalloidsCannot be degraded. Only transformed or relocated: biosorption to cell surfaces, bioaccumulation, bioleaching (Acidithiobacillus ferrooxidans/thiooxidans mobilising copper and uranium), enzymatic reduction (Cr(VI) → less toxic and less mobile Cr(III); mercuric reductase, merA), and precipitation as metal sulfides by sulfate-reducing bacteria

Rate-limiting factors in the field are rarely enzymology: bioavailability (sorption, NAPL phase), electron acceptor supply, nutrients (the classic C:N:P imbalance of a spill), temperature, pH, moisture, and inhibitory co-contaminants.

Field landmarks. The 1989 Exxon Valdez spill in Prince William Sound became the best-documented demonstration that nutrient addition (biostimulation) accelerates shoreline hydrocarbon loss. After the 2010 Deepwater Horizon blowout, deep-sea plumes showed rapid blooms of hydrocarbon-degrading Oceanospirillales, Alcanivorax and Colwellia, confirming that oceanic communities respond within days. In patent and policy history, Ananda Chakrabarty’s oil-degrading Pseudomonas led to the US Supreme Court decision (Diamond v. Chakrabarty, 1980) that a genetically engineered living organism is patentable; in India, TERI’s “Oilzapper” bacterial consortium is the widely cited applied example.

Phytoremediation

MechanismWhat the plant doesTypical targets and examples
PhytoextractionTakes the contaminant up into harvestable shoots, which are then removedMetals. Hyperaccumulators: Noccaea (Thlaspi) caerulescens for Zn/Cd, Alyssum species for Ni, the fern Pteris vittata for arsenic; Brassica juncea with chelate assistance for Pb
RhizofiltrationRoots adsorb and absorb contaminants from waterMetals and radionuclides in groundwater and effluent; sunflower, Indian mustard in hydroponic systems
PhytostabilisationImmobilises contaminants in the root zone (precipitation, sorption, redox change) and prevents erosion and leaching — it does not remove themMine spoil, tailings, heavily metal-loaded soil
Phytodegradation / phytotransformationMetabolises the contaminant inside plant tissuesSome organics, munitions, chlorinated solvents
RhizodegradationRoot exudates and the rhizosphere community degrade the contaminant outside the plantPetroleum hydrocarbons, PAHs; grasses with dense fibrous roots
PhytovolatilisationTakes up and releases the contaminant (or a derivative) to the air through transpirationSe, Hg, some VOCs; transfers rather than destroys, so it is contentious
Constructed wetlandsCombined plant–microbe treatment of wastewater and mine drainageReeds (Phragmites), Typha, Canna; BOD, N, P and metals

A hyperaccumulator is defined by accumulating a metal in shoot dry matter at concentrations one to two orders of magnitude above normal plants — conventionally above about 1,000 µg g⁻¹ for Ni, Cu or Pb, above 10,000 µg g⁻¹ for Zn or Mn, and above 100 µg g⁻¹ for Cd — while growing normally.

  • Advantages: very low cost, solar-driven, in situ, improves soil structure and carbon, publicly acceptable, and the harvested biomass can be processed for metal recovery (phytomining).
  • Limits: slow (years to decades), restricted to the root zone depth, dependent on bioavailability of the contaminant, sensitive to climate and phytotoxicity, and it creates a contaminated-biomass disposal problem.

Memory Tricks

Don’t Confuse

ThisvsThat
BOD (biological, days, biodegradable fraction)vsCOD (chemical, hours, everything oxidisable; COD ≥ BOD)
HRT (liquid residence time, \(V/Q\))vsSRT (sludge/biomass age, set by wasting)
F/M ratio (loading per unit biomass)vsOrganic loading rate (per unit volume)
Bulking (poor settling, high SVI)vsRising sludge (denitrification gas lifts settled sludge)
Primary treatment (physical settling)vsSecondary treatment (biological oxidation)
Nitrification (aerobic, autotrophic, slow — needs long SRT)vsDenitrification (anoxic, heterotrophic, needs a carbon source)
Acetoclastic methanogens (acetate → CH₄)vsHydrogenotrophic methanogens (H₂ + CO₂ → CH₄)
Rhizobium (symbiotic, nodules, legumes)vsAzotobacter (free-living) and Azospirillum (associative, cereals)
AM mycorrhiza — arbuscules, intracellular, mainly P uptakevsEctomycorrhiza — mantle + Hartig net, intercellular, forest trees
PSB (solubilise existing soil P)vsDiazotrophs (fix atmospheric N₂)
Bt (bacterial toxin protein)vsTrichoderma (fungal antagonist) and NPV (insect baculovirus, narrow target spectrum)
Azadirachtin (antifeedant + growth regulator)vsPheromone (behavioural, no toxicity)
First-generation (food crops)vsSecond-generation (lignocellulose, needs pretreatment and pentose fermentation)
Dark fermentation (no light, ≤ 4 mol H₂/mol glucose)vsPhotofermentation (light, higher conversion, slow)
Biostimulation (add nutrients/O₂)vsBioaugmentation (add organisms)
Bioventing (air to unsaturated zone)vsBiosparging (air below the water table)
Bioleaching (mobilise metals into solution)vsBiosorption/biomineralisation (immobilise them)
Phytoextraction (removes the metal in shoots)vsPhytostabilisation (leaves it in place, immobilised)
Phytodegradation (inside the plant)vsRhizodegradation (by rhizosphere microbes)
Biofilm tolerance (matrix, slow growth, persisters; MIC may be unchanged)vsGenetic resistance (MIC raised, heritable)

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. Which marine invertebrate group has supplied the largest share of marine natural-product drug leads, and what is the chief obstacle to developing them?
  2. Name the four sequential microbial steps of anaerobic digestion.
  3. State the difference between biostimulation and bioaugmentation in one sentence.
Answers
  1. Sponges (with tunicates, molluscs and bryozoans close behind). The chief obstacle is supply: the metabolite is present at microgram-per-kilogram levels, so development needs total synthesis, semisynthesis, culture of the producer, or heterologous expression of the (often symbiont) biosynthetic genes.
  2. Hydrolysis → acidogenesis → acetogenesis → methanogenesis.
  3. Biostimulation supplies what the resident degraders lack (nutrients, oxygen or another electron acceptor, a co-substrate); bioaugmentation introduces the degrading organisms themselves.

Level 2: Part B Style

Q1 (practice). A treatment plant receives wastewater at 300 mg/L BOD₅ and discharges at 30 mg/L. The BOD removal efficiency is:

  • (a) 10%
  • (b) 30%
  • (c) 90%
  • (d) 270%
Answer and explanation

(c). \((300-30)/300 \times 100 = 90\%\). Option (d) is the common error of reporting the removed load (270 mg/L) as a percentage.

Q2 (practice). A 1 L sample of mixed liquor with MLSS 2,500 mg/L settles to 250 mL in 30 minutes. The sludge volume index is:

  • (a) 10 mL/g
  • (b) 100 mL/g
  • (c) 250 mL/g
  • (d) 625 mL/g
Answer and explanation

(b). \(\text{SVI} = 250 \times 1000 / 2500 = 100\) mL/g — a well-settling sludge. Values well above about 150 mL/g suggest bulking.

Q3 (practice). Which pairing of biofertilizer and relationship is incorrect?

  • (a) Rhizobium — symbiotic nodule former on legumes
  • (b) Azospirillum — associative, rhizosphere of cereals
  • (c) Anabaena azollae — symbiont of the water fern Azolla, used in rice
  • (d) Arbuscular mycorrhizal fungi — symbiotic nitrogen fixers
Answer and explanation

(d). AM fungi are symbionts, but they do not fix nitrogen — they greatly extend the absorbing surface and mainly improve phosphorus acquisition. Nitrogen fixation is confined to prokaryotes.

Q4 (practice). The theoretical maximum yield of ethanol from glucose by alcoholic fermentation is closest to:

  • (a) 0.33 g/g
  • (b) 0.44 g/g
  • (c) 0.51 g/g
  • (d) 0.67 g/g
Answer and explanation

(c). \(\mathrm{C_6H_{12}O_6 \rightarrow 2\,C_2H_5OH + 2\,CO_2}\): \(2 \times 46.07/180.16 = 0.511\) g/g, with the remaining 0.489 g/g as CO₂.

Q5 (practice). Highly chlorinated PCB congeners are most effectively attacked by:

  • (a) aerobic biphenyl dioxygenase attack
  • (b) anaerobic reductive dechlorination, followed by aerobic mineralisation of the less-chlorinated products
  • (c) photolysis alone
  • (d) bioleaching by Acidithiobacillus
Answer and explanation

(b). Heavy chlorination blocks aerobic dioxygenase attack but makes the molecule a good electron acceptor, so anaerobic reductive dechlorination goes first; the lower-chlorinated products are then mineralised aerobically. This is why sequential anaerobic–aerobic treatment is the design of choice. Bioleaching applies to metals, not organics.

Level 3: Part C Style

Q1 (practice). An activated-sludge unit operates at: influent flow \(Q\) = 5,000 m³/d, influent BOD \(S_0\) = 250 mg/L, aeration tank volume \(V\) = 1,250 m³, MLSS \(X\) = 2,500 mg/L, waste sludge flow \(Q_w\) = 50 m³/d at \(X_r\) = 10,000 mg/L. Effluent suspended solids are negligible.

(i) Compute HRT, F/M and SRT. (ii) The plant must now nitrify, which requires an SRT of at least 10 days at this temperature. What single operating change achieves this, and what is its side effect? (iii) Which statements are correct?

(A) HRT is 6 hours and F/M is 0.4 kg BOD per kg MLSS per day. (B) SRT is 6.25 days, so nitrification will be incomplete. (C) Reducing sludge wasting to 31 m³/d would raise SRT above 10 days. (D) Raising MLSS at constant wasting rate also raises SRT, and additionally lowers F/M.

  • (a) A, B and C
  • (b) A, B, C and D
  • (c) B, C and D
  • (d) A and B only
Answer and worked solution

(b).

  • (i) HRT \(= V/Q = 1250/5000 = 0.25\) d = 6 h. F/M \(= QS_0/(VX) = (5000 \times 250)/(1250 \times 2500) = 1.25\times10^{6}/3.125\times10^{6} =\) 0.4 d⁻¹. SRT \(= VX/(Q_wX_r) = 3.125\times10^{6}/(50 \times 10{,}000) =\) 6.25 d.
  • (ii) Waste less sludge (lower \(Q_w\)), which raises sludge age. Side effects: MLSS rises, F/M falls, oxygen demand per unit BOD increases, more inert material accumulates, and the clarifier is loaded harder — the classic trade of nitrification against solids handling.
  • (iii) (A) and (B) are the computed values. (C): required \(Q_w = VX/(\theta_c X_r) = 3.125\times10^{6}/(10 \times 10{,}000) = 31.25\) m³/d, so 31 m³/d gives slightly more than 10 days. Correct. (D): SRT \(\propto X\) at fixed \(Q_wX_r\), and F/M \(\propto 1/X\), so both statements hold.

Q2 (practice). Two feedstocks are available for a biogas digester:

FeedstockCarbon (% of dry mass)Nitrogen (% of dry mass)
A (livestock slurry solids)402.0
B (cereal straw)450.5

(i) Compute the C/N ratio of each feedstock. (ii) In what mass ratio (A:B, dry basis) should they be mixed to give a C/N of 30:1? (iii) Which statements are correct?

(A) Feedstock A alone would risk ammonia inhibition; B alone would be nitrogen-limited. (B) The required mix is A:B = 1.5:1 by dry mass. (C) A C/N of 30:1 lies within the generally recommended range for anaerobic digestion. (D) If the mixture soured, with falling pH and rising volatile fatty acids, the correct first response is to increase the organic loading rate.

  • (a) A, B and C
  • (b) A, B, C and D
  • (c) B and C only
  • (d) A, C and D
Answer and worked solution

(a).

  • (i) A: \(40/2.0 =\) 20:1. B: \(45/0.5 =\) 90:1.
  • (ii) For \(x\) kg of A and \(y\) kg of B: \(\dfrac{0.40x + 0.45y}{0.020x + 0.005y} = 30\). Cross-multiplying: \(0.40x + 0.45y = 0.60x + 0.15y\), so \(0.30y = 0.20x\) and \(x = 1.5y\) — i.e. A:B = 1.5:1. Check with 150 kg A + 100 kg B: C = 60 + 45 = 105 kg, N = 3.0 + 0.5 = 3.5 kg, ratio = 30.0, as required.
  • (iii) (A) is the standard rationale for co-digestion. (B) is the computed answer. (C) — 20–30:1 is the usual recommendation. (D) is wrong and dangerous: souring means acidogenesis is already outrunning methanogenesis, so the response is to reduce loading, buffer the pH, and let the methanogens recover.

Q3 (practice). A hydrocarbon-contaminated shoreline is divided into four plots and monitored for 60 days. “Degraders” are hydrocarbon-degrading CFU per g; TPH is total petroleum hydrocarbons.

PlotTreatmentDegraders, day 0Degraders, day 60TPH removed (%)
1Untreated control2 × 10⁵4 × 10⁵14
2N + P fertiliser2 × 10⁵9 × 10⁷62
3Inoculum of a commercial degrader consortium2 × 10⁵6 × 10⁵18
4Inoculum + N + P fertiliser2 × 10⁵1 × 10⁸64

(i) What was limiting degradation at this site? (ii) Explain the plot 3 result. (iii) Which statements are correct?

(A) The site was nutrient-limited, not limited by the absence of degrading organisms. (B) Bioaugmentation added little over biostimulation, as the plot 2 and plot 4 results are close. (C) The rise in degraders in plot 2 without any inoculum shows that competent organisms were already present. (D) Plot 1’s 14% loss is best attributed to a combination of natural attenuation and abiotic losses such as evaporation and washout.

  • (a) A, B, C and D
  • (b) A and C only
  • (c) B, C and D
  • (d) A, B and D
Answer and worked solution

(a). All four statements hold, and together they are the textbook argument for biostimulation at hydrocarbon spills.

  • (i) Nitrogen and phosphorus. A fresh spill delivers a large carbon load with no matching N or P, so the C:N:P ratio is wildly unbalanced. Supplying N and P raised degraders about 225-fold relative to the control (4 × 10⁵ to 9 × 10⁷ CFU/g) and increased TPH removal more than fourfold (14% to 62%).
  • (ii) The introduced consortium barely established (6 × 10⁵ vs 4 × 10⁵ in the control) and gave almost no extra removal, because (a) the indigenous community already had the catabolic capability and (b) the introduced strains faced the same nutrient limitation plus predation, competition and unfamiliar physical conditions. Inoculation helps mainly when the required pathway is genuinely absent — for example some chlorinated-solvent dechlorination.
  • (iii) (B) 62% vs 64% is within field variability. (C) is the key inference. (D) weathering and physical loss always contribute, so an untreated control is essential before crediting biology.

Q4 (practice). A field of 1 hectare is contaminated with cadmium at 10 mg/kg soil in the plough layer (depth 0.20 m, bulk density 1.3 g/cm³). A phytoextraction crop yields 20 t/ha of dry shoot biomass per harvest, accumulating Cd at 100 mg/kg dry mass. The target is to bring soil Cd down to 5 mg/kg.

(i) Compute the mass of soil treated and the total Cd present. (ii) Compute Cd removed per harvest and the number of harvests needed. (iii) Which statements are correct?

(A) The plough layer holds about 2,600 t of soil and about 26 kg of Cd. (B) Each harvest removes about 2 kg of Cd, so about 7 harvests are needed. (C) The calculation assumes all soil Cd is equally available to the plant, which is usually optimistic. (D) The harvested biomass can be discarded as ordinary green waste.

  • (a) A, B and C
  • (b) A, B, C and D
  • (c) B, C and D
  • (d) A and C only
Answer and worked solution

(a).

  • (i) Soil volume \(= 10{,}000\ \mathrm{m^2} \times 0.20\ \mathrm{m} = 2{,}000\ \mathrm{m^3}\); at 1.3 g/cm³ = 1,300 kg/m³, mass \(= 2.6 \times 10^{6}\) kg = 2,600 t. Cd \(= 2.6\times10^{6}\ \mathrm{kg} \times 10\ \mathrm{mg/kg} = 2.6\times10^{7}\) mg = 26 kg.
  • (ii) Per harvest: \(20{,}000\ \mathrm{kg} \times 100\ \mathrm{mg/kg} = 2\times10^{6}\) mg = 2 kg Cd. To go from 10 to 5 mg/kg, remove half of 26 kg = 13 kg, so \(13/2 = 6.5 \rightarrow\) 7 harvests (one growing season each, so 7 seasons at best).
  • (iii) (C) is the crucial caveat: only the bioavailable fraction is extractable, so real timelines are longer and often plateau; chelate assistance raises availability but risks leaching. (D) is wrong — the biomass is a concentrated metal waste requiring controlled disposal, or processing for metal recovery (phytomining). This arithmetic is exactly why phytoextraction suits large, shallow, moderately contaminated areas and not hotspots.

Q5 (practice). A dark-fermentative culture on glucose gives 1.8 mol H₂ per mol glucose, with acetate and butyrate as the main liquid products.

(i) What is the stoichiometric maximum for dark fermentation, and on which product route? (ii) What fraction of that maximum was achieved? (iii) Which statements are correct?

(A) The theoretical ceiling is 4 mol H₂ per mol glucose, on the acetate route; the butyrate route gives 2. (B) The culture achieved 45% of the acetate-route maximum, consistent with a mixed acetate–butyrate fermentation. (C) Most of the glucose’s energy remains in the liquid products, so a second stage (methanogenesis or photofermentation) raises overall energy recovery. (D) Raising the hydrogen partial pressure in the headspace would increase the H₂ yield.

  • (a) A, B and C
  • (b) A, B, C and D
  • (c) B and C only
  • (d) A, C and D
Answer and worked solution

(a).

  • (i) 4 mol H₂ per mol glucose when acetate is the sole product; 2 mol on the butyrate route. These are hard stoichiometric limits for fermentative hydrogen production.
  • (ii) \(1.8/4 =\) 45%. A mixture of the two routes, plus biomass and other reduced products, explains a value between the two ceilings.
  • (iii) (D) is false and is the point of the question: hydrogen-producing reactions are thermodynamically inhibited by their own product, so high H₂ partial pressure shifts metabolism away from H₂ towards more reduced products (lactate, ethanol). Practice runs the opposite way — sparging or gas removal to keep H₂ partial pressure low. This is the same thermodynamic coupling that makes syntrophic acetogenesis depend on methanogens consuming H₂.

Quick Revision Table

ItemFact
Marine valueChemical and genetic novelty; most marine microbes uncultured → metagenomics; extremozymes (e.g. Pfu and Vent polymerases from vent archaea)
Algal productsAgar/agarose (Gelidium, Gracilaria), carrageenan (Chondrus, Kappaphycus), alginate (brown algae), β-carotene (Dunaliella), omega-3 from microalgae
Marine drugsCytarabine (sponge arabinosyl nucleosides), ziconotide (cone snail ω-conotoxin, N-type Ca²⁺ channel), trabectedin (tunicate), eribulin (halichondrin B analogue), auristatin ADC payloads (dolastatin lineage)
Marine toolsTetrodotoxin/saxitoxin (Na⁺ channels), okadaic acid (PP1/PP2A), conotoxins (channel subtypes), GFP from Aequorea
Supply problemTotal synthesis, semisynthesis, aquaculture/cell culture, or heterologous expression of symbiont gene clusters
Biofilm stagesConditioning film → reversible → irreversible attachment → microcolony → maturation → dispersal; c-di-GMP high = sessile
EPSPolysaccharide, protein, eDNA, lipid; protection, adhesion, HGT, gradients, persisters → tolerance not resistance
BiofoulingConditioning film → bacteria/diatoms → larvae and spores → barnacles/mussels; drag, fuel, corrosion, invasives; TBT banned, Cu and foul-release coatings
BOD vs CODBOD biological and slow (BOD₅ at 20 °C); COD chemical and fast; COD ≥ BOD; BOD/COD = biodegradability
Treatment stagesPreliminary (screens/grit) → primary (settling) → secondary (biological) → tertiary (nutrients, disinfection)
Activated sludgeHRT = V/Q; SRT = VX/(Q_wX_r); F/M = QS₀/(VX); SVI = settled mL/L × 1000 / MLSS; bulking, foaming, rising sludge
N removalAerobic nitrification (slow autotrophs, long SRT) then anoxic denitrification; anammox for high-N low-C streams
Anaerobic digestionHydrolysis → acidogenesis → acetogenesis → methanogenesis; C/N 20–30:1; mesophilic 35 °C / thermophilic 55 °C; syntrophic H₂ transfer; UASB granules
BiofertilizersRhizobium (symbiotic), Azotobacter (free-living), Azospirillum (associative), cyanobacteria/Azolla (rice), Frankia (trees), AM mycorrhiza (P, not N), PSB (organic acids)
BiopesticidesBt (alkaline gut, Cry receptors; kurstaki vs israelensis), Trichoderma (mycoparasitism + ISR), Pseudomonas fluorescens, Beauveria/Metarhizium, NPV (narrow target spectrum), neem/azadirachtin
Biofuel generations1st food crops; 2nd lignocellulose (pretreatment, cellulase, pentoses); 3rd algae (harvesting cost); 4th engineered
Ethanol0.511 g/g theoretical (+0.489 g CO₂); S. cerevisiae hexoses, Zymomonas Entner–Doudoroff
BiodieselTransesterification → FAME + glycerol; alkali, acid or lipase catalysis; cetane, cloud point
BiohydrogenDirect/indirect biophotolysis (O₂-sensitive hydrogenase), photofermentation (Rhodobacter), dark fermentation (≤ 4 mol H₂/mol glucose, acetate route), MECs
BioremediationIn situ (attenuation, biostimulation, bioaugmentation, bioventing, biosparging) vs ex situ (landfarming, biopiles, composting, bioreactors)
Key distinctionBiostimulation = feed the natives; bioaugmentation = seed new organisms
RecalcitrantsPAHs (bioavailability), PCBs (anaerobic dechlorination then aerobic), TCE (Dehalococcoides; methanotroph co-metabolism), PET hydrolase
MetalsNot degradable: biosorption, bioaccumulation, bioleaching (Acidithiobacillus), Cr(VI)→Cr(III), merA, sulfide precipitation by SRB
Field landmarksExxon Valdez 1989 (nutrient biostimulation); Deepwater Horizon 2010 (Alcanivorax, Colwellia, Oceanospirillales); Diamond v. Chakrabarty 1980; Oilzapper (India)
PhytoremediationPhytoextraction (hyperaccumulators: Noccaea Zn/Cd, Alyssum Ni, Pteris vittata As), rhizofiltration, phytostabilisation, phyto-/rhizodegradation, phytovolatilisation, constructed wetlands
Hyperaccumulator thresholdsRoughly > 1,000 µg/g (Ni, Cu, Pb), > 10,000 µg/g (Zn, Mn), > 100 µg/g (Cd) in shoot dry matter

Key Takeaways

What’s Next

Advertisement
Advertisement