Skip to content

Engineering Principles and Bioprocess Thermodynamics

Material and energy balances, degree of reduction, transport phenomena, heat and mass transfer and non-equilibrium thermodynamics for CSIR NET.

  • 22 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: The Fermenter That Cooked Itself
  3. Mathematics You Actually Use
  4. Material Balances
  5. Energy Balances
  6. Transport Phenomena
  7. Thermodynamics of Living Systems
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: The Fermenter That Cooked Itself

How CSIR NET asks it. Part B: what a degree of reduction is, which transport analogy goes with which dimensionless group, the sign of entropy production, whether a given coupled reaction can run. Part C: close a stoichiometric balance to get the oxygen demand or the cooling duty, solve a growth ODE, read a dimensionless-number definition and decide what happens when a parameter doubles.


Mathematics You Actually Use

The revised syllabus opens with “introductory mathematics” because every later unit is quantitative. The exam does not test theorems; it tests whether you can set up and solve the four or five standard forms.

ToolBioprocess useStandard result to have ready
DifferentiationFinding maxima: optimal dilution rate, optimal harvest timeSet \( \mathrm{d}(DX)/\mathrm{d}D = 0 \)
IntegrationBatch time from a rate law; cumulative product\( t = \int \mathrm{d}X / r_X \)
First-order ODEExponential growth and death, washout, first-order decay\( \mathrm{d}X/\mathrm{d}t = \mu X \Rightarrow X = X_0 e^{\mu t} \)
Linear ODE with inputWell-mixed tank with feed: \( \mathrm{d}C/\mathrm{d}t = D(C_{in} - C) \)Response time \( 1/D \); 95% of step in \( 3/D \)
Coupled ODEsSubstrate–biomass–product; predator–prey; oscillating glycolysisSteady state = set all derivatives to zero
Linear algebraElemental balances, flux balance analysis, stoichiometric matrix \( \mathbf{S}\mathbf{v} = 0 \)Underdetermined systems need extra measurements or an objective
Numerical methodsEuler and Runge–Kutta for non-analytic kinetics; least squares for \( K_m \), \( V_{max} \); Newton–Raphson for implicit equationsEuler: \( y_{n+1} = y_n + h f(y_n) \), error \( O(h) \)
StatisticsFitting kinetic constants, design of experiments, error propagationLinearised plots bias the fit (see enzyme kinetics)

Doubling time. From \( X = X_0 e^{\mu t} \), \( t_d = \ln 2/\mu = 0.693/\mu \). A culture with \( \mu = 0.5\ \mathrm{h^{-1}} \) doubles in 1.39 h. Specific rates are per unit biomass: \( \mu = (1/X)(\mathrm{d}X/\mathrm{d}t) \), units h⁻¹. Volumetric rates (\( r_X = \mu X \), g L⁻¹ h⁻¹) are what a plant manager cares about; specific rates are what a physiologist cares about. Confusing them is the commonest unit error in Part C.

Stoichiometric matrix. Write every reaction as a column of stoichiometric coefficients, metabolites as rows. At metabolic steady state \( \mathbf{S}\mathbf{v} = \mathbf{0} \): the flux vector lies in the null space of \( \mathbf{S} \). Because there are usually more reactions than metabolites, the system is underdetermined, which is precisely why flux balance analysis needs an objective function (see metabolic engineering). Rank arguments from linear algebra decide how many extra measurements you need: degrees of freedom = (number of fluxes) − rank(\( \mathbf{S} \)).


Material Balances

The master statement for any control volume:

$$\text{Accumulation} = \text{In} - \text{Out} + \text{Generation} - \text{Consumption}$$

At steady state accumulation is zero (a chemostat). In a batch vessel In and Out are zero and everything is accumulation. The art is choosing the control volume (whole fermenter, gas phase only, cell only) and the basis (1 h, 1 L, 1 mol substrate, 1 C-mol).

Yield coefficients

SymbolDefinitionTypical aerobic value on glucose
\( Y_{X/S} \)g biomass per g substrate0.4–0.5 g/g
\( Y_{X/O} \)g biomass per g O₂roughly 1 g/g
\( Y_{P/S} \)g product per g substratecompare with the theoretical maximum
\( Y_{ATP} \)g biomass per mol ATPoften quoted near 10 g/mol for anaerobes
\( RQ \)mol CO₂ evolved / mol O₂ consumedabout 1 on glucose; > 1 signals fermentation or lipogenesis

Anaerobic ethanol yield. C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂. Theoretical \( Y_{P/S} = 2(46.07)/180.16 = 0.511 \) g/g, with 0.489 g/g of CO₂. A real yeast plant reaches roughly 90–93% of this because some carbon goes to biomass and glycerol. Quoting 0.51 g/g from memory is worth a mark on its own.

Elemental balance with a biomass formula

Biomass is written as a C-mole formula, commonly \( \mathrm{CH_{1.8}O_{0.5}N_{0.2}} \) (formula weight 24.6 g per C-mol). Balance C, H, O and N across

$$\mathrm{C_6H_{12}O_6} + a\,\mathrm{O_2} + b\,\mathrm{NH_3} \rightarrow c\,\mathrm{CH_{1.8}O_{0.5}N_{0.2}} + d\,\mathrm{CO_2} + e\,\mathrm{H_2O}$$

With four element balances and five unknowns, one measurement (usually \( Y_{X/S} \) or the RQ) closes the system — a straight linear-algebra problem.

Degree of reduction: the shortcut

Define the degree of reduction \( \gamma \) per C-atom, counting C = 4, H = 1, O = −2, N = −3 (with NH₃ as the nitrogen reference), so that CO₂, H₂O and NH₃ all have \( \gamma = 0 \) and each O₂ molecule accepts 4 electrons:

Compound\( \gamma \) per C-mol
Glucose4.00
Ethanol6.00
Acetic acid4.00
Methane8.00
Biomass \( \mathrm{CH_{1.8}O_{0.5}N_{0.2}} \)\( 4 + 1.8 - 1.0 - 0.6 = 4.20 \)

Available-electron balance: electrons entering in substrate = electrons in products + electrons passed to O₂ (4 electrons per O₂):

$$\gamma_S n_S = \gamma_X n_X + \gamma_P n_P + 4 n_{O_2}$$

This single equation gives the oxygen demand without touching H and O balances, which is why examiners like it.


Energy Balances

For a flow system the general statement is the first law; for a fermenter the practical form is

$$Q_{removed} = Q_{metabolic} + Q_{agitation} + Q_{gassing} - Q_{evaporation} - Q_{sensible}$$
  • Metabolic heat scales with oxygen consumption: about 460 kJ per mol O₂ (the “oxycalorific” rule, roughly constant across substrates because the electrons all end at O₂). Anaerobic fermentations release far less heat per unit substrate — most of the free energy stays in the ethanol.
  • Agitation power appears as heat, typically 1–5 kW m⁻³ in a stirred aerated vessel.
  • Heat removal through a jacket or coil obeys \( Q = UA\,\Delta T_{lm} \), with overall coefficient \( U \) and log-mean temperature difference.
  • Cooling-water duty from \( Q = \dot{m}\,c_p\,\Delta T \), with \( c_p \approx 4.18 \) kJ kg⁻¹ K⁻¹.

The scale problem in one line. Heat generation scales with volume (\( L^3 \)); jacket area scales as \( L^2 \). The area-to-volume ratio falls as \( 1/L \), so a 100 m³ vessel is far harder to cool than a 10 L one. The same geometry argument explains why mixing and oxygen transfer, not biology, usually limit scale-up.


Transport Phenomena

Three transports, one mathematical form — a flux proportional to a gradient:

TransportLawFluxDiffusivityDimensionless group
MomentumNewton: \( \tau = -\mu\,\mathrm{d}u/\mathrm{d}y \)momentum\( \nu = \mu/\rho \)Reynolds \( Re = \rho u L/\mu \)
HeatFourier: \( q = -k\,\mathrm{d}T/\mathrm{d}y \)energy\( \alpha = k/\rho c_p \)Prandtl \( Pr = \nu/\alpha \), Nusselt \( Nu = hL/k \)
MassFick: \( J = -D\,\mathrm{d}C/\mathrm{d}y \)moles\( D \)Schmidt \( Sc = \nu/D \), Sherwood \( Sh = k_c L/D \)

Rheology matters. Water-like broths are Newtonian; mycelial and polysaccharide broths (xanthan, Streptomyces, Aspergillus) are non-Newtonian and usually pseudoplastic (shear-thinning), often fitted by the power law \( \tau = K\dot{\gamma}^n \) with \( n < 1 \). Apparent viscosity is then high far from the impeller, so the vessel develops a well-mixed cavern near the impeller and stagnant, oxygen-starved zones elsewhere. Bingham plastics need a yield stress before they flow at all.

Flow regimes. In a stirred tank the relevant Reynolds number uses the impeller: \( Re_i = \rho N D_i^2/\mu \), with \( N \) in revolutions per second. Turbulent above roughly 10⁴, laminar below about 10.

Mass transfer across a gas–liquid film

Oxygen is the limiting nutrient in almost every aerobic process because it is so sparingly soluble — of the order of 7–8 mg L⁻¹ in water in equilibrium with air at 25–30 °C, which a dense culture consumes in seconds. The two-film model gives

$$\mathrm{OTR} = k_L a\,(C^* - C_L)$$
  • \( k_L \) is the liquid-film coefficient, \( a \) the interfacial area per unit volume; they are lumped because \( a \) cannot be measured independently in a bubbling tank. Units of \( k_La \): h⁻¹ (or s⁻¹).
  • \( C^* \) comes from Henry’s law, so it rises with oxygen partial pressure (hence oxygen enrichment and back-pressure as process levers) and falls with temperature and dissolved solutes.
  • The liquid film dominates because oxygen is sparingly soluble; for a highly soluble gas such as ammonia the gas film controls.
  • At steady state OTR must equal OUR \( = q_{O_2}X \). Below the critical dissolved oxygen (a small fraction of saturation for most organisms) respiration becomes oxygen-limited.

Measuring \( k_La \): dynamic gassing-out (stop aeration, watch DO fall at the rate of OUR, resume and fit the rise), sulfite oxidation, or gas-phase O₂/CO₂ balancing with off-gas analysis — the last is non-invasive and works during a real fermentation.


Thermodynamics of Living Systems

Classical thermodynamics describes equilibrium. A cell is never at equilibrium: equilibrium is death. The right framework is non-equilibrium (irreversible) thermodynamics, in which a cell is an open system held in a steady state far from equilibrium by continuous flows of matter and energy.

Entropy production and coupling

For each process, write a flow \( J_i \) and its conjugate force \( X_i \) (a chemical-potential difference, an electrochemical gradient, a temperature difference). The entropy production per unit volume is

$$\sigma = \sum_i J_i X_i \ \ge\ 0$$

The second law demands only that the sum is non-negative. An individual term may be negative — that is exactly what coupling means: an exergonic process (large positive \( J X \)) drags an endergonic one (negative \( J X \)) uphill. Near equilibrium the flows are linear in the forces, \( J_i = \sum_k L_{ik}X_k \), and Onsager reciprocity states \( L_{ik} = L_{ki} \). The degree of coupling derived from these coefficients sets the maximum efficiency of a free-energy converter such as oxidative phosphorylation.

IdeaStatementBiological example
Open systemExchanges matter and energy; can hold a steady state with \( \mathrm{d}S_{internal}/\mathrm{d}t > 0 \) while its own entropy stays constantAny growing cell; a chemostat
Local equilibriumThermodynamic variables defined locally even though the whole system is not at equilibriumBasis of all metabolic thermodynamics
Entropy exportOrder inside is paid for by larger disorder exported (heat, CO₂, water)Growth does not violate the second law
CouplingNegative \( \Delta G \) of one reaction drives a positive \( \Delta G \) of another through a shared intermediateATP-driven biosynthesis; Na⁺/glucose symport
Prigogine’s minimum entropy productionNear equilibrium, a steady state is the state of least entropy productionA linear-regime statement; far-from-equilibrium systems need not obey it
Dissipative structureOrdered pattern maintained only by dissipationOscillating glycolysis; chemical waves

Coupled reactions in practice. Reactions share a common intermediate; the free energies add. Glucose + Pᵢ → glucose 6-phosphate is endergonic, ATP hydrolysis is strongly exergonic, and hexokinase couples them so that the sum is negative. Always compare the actual \( \Delta G \) (which includes the cellular \( Q \)) and not \( \Delta G^{\circ\prime} \): in the cell, ATP hydrolysis delivers appreciably more than its standard value because [ATP]/([ADP][Pᵢ]) is held far from equilibrium.

Glycolytic oscillations

Suspensions of yeast cells, or yeast extracts fed glucose, show sustained oscillations in NADH fluorescence (and in ATP, F6P, FBP and pH) with a period of the order of minutes. The accepted core mechanism is the autocatalytic, allosteric regulation of phosphofructokinase: PFK-1 is activated by its own downstream product ADP (and by AMP and F2,6BP) and inhibited by ATP, giving positive feedback plus a delay — the classic recipe for a limit cycle. Whole-cell suspensions can synchronise through a secreted metabolite, so the population oscillates in phase and the signal is visible in a cuvette.

Why the exam cares: it is the textbook demonstration that a metabolic network far from equilibrium is a dynamical system. Expect questions asking which enzyme is responsible, which species oscillate in antiphase (ATP against ADP; NAD⁺ against NADH), and what the mathematics requires (non-linear feedback plus a delay; a steady state that has gone unstable, not a damped relaxation).


Memory Tricks

Don’t Confuse

ThisvsThat
Specific rate \( \mu \) (h⁻¹), per unit biomassvsVolumetric rate \( r_X = \mu X \) (g L⁻¹ h⁻¹)
Yield \( Y_{X/S} \), a ratio of amountsvsProductivity, an amount per volume per time
\( \Delta G^{\circ\prime} \), standard conditionsvs\( \Delta G \), with actual cellular concentrations
Equilibrium (all forces zero, no flow)vsSteady state (forces non-zero, flows constant, entropy produced)
\( k_L \) (m s⁻¹), a film coefficientvs\( k_La \) (h⁻¹), lumped with interfacial area
\( C^* \), saturation set by Henry’s lawvs\( C_L \), the measured dissolved oxygen
Newtonian broth, constant viscosityvsPseudoplastic mycelial broth, apparent viscosity falls with shear
RQ (CO₂/O₂, dimensionless)vsOUR (volumetric, mmol L⁻¹ h⁻¹)

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. Write the degree of reduction of biomass \( \mathrm{CH_{1.8}O_{0.5}N_{0.2}} \) (ammonia as the nitrogen reference).
  2. A culture grows with \( \mu = 0.35\ \mathrm{h^{-1}} \). What is its doubling time?
  3. Which film controls the transfer of oxygen into a fermentation broth, and why?
Answers
  1. \( \gamma = 4 + 1.8 - 2(0.5) - 3(0.2) = \mathbf{4.2} \).
  2. \( t_d = 0.693/0.35 = \mathbf{1.98\ h} \).
  3. The liquid film, because oxygen is sparingly soluble in water; the resistance sits on the liquid side, which is why the lumped coefficient \( k_La \) is defined with a liquid-phase driving force.

Level 2: Part B Style

Q1 (practice). A yeast plant ferments 1,000 kg of glucose anaerobically and recovers 450 kg of ethanol. The yield as a percentage of the theoretical maximum is closest to:

  • (a) 45%
  • (b) 72%
  • (c) 88%
  • (d) 98%
Answer and explanation

(c). Theoretical \( Y_{P/S} = 2 \times 46.07/180.16 = 0.511 \) g/g, so 1,000 kg glucose gives at most 511 kg ethanol. 450/511 = 0.881, i.e. about 88% of theoretical. Option (a) is the trap of comparing with 1 kg per kg.

Q2 (practice). In a stirred tank the impeller Reynolds number is \( Re_i = \rho N D_i^2/\mu \). If the impeller speed is doubled and the broth’s apparent viscosity simultaneously falls to half (shear-thinning), \( Re_i \) changes by a factor of:

  • (a) 1
  • (b) 2
  • (c) 4
  • (d) 0.5
Answer and explanation

(c). \( Re_i \propto N/\mu \). Doubling \( N \) doubles it; halving \( \mu \) doubles it again: \( 2 \times 2 = \mathbf{4} \). Shear-thinning is self-reinforcing in this sense — faster stirring thins the broth, which raises the effective Reynolds number more than the speed change alone.

Q3 (practice). Which statement about a cell as a thermodynamic system is correct?

  • (a) A growing cell is at equilibrium with its medium.
  • (b) A cell maintains a steady state far from equilibrium and exports entropy.
  • (c) Coupling allows the total entropy production to be negative.
  • (d) Onsager reciprocity applies to all reactions regardless of distance from equilibrium.
Answer and explanation

(b). (a) is false — equilibrium means no net flows, i.e. death. (c) is false: \( \sum J_iX_i \ge 0 \) always; coupling only lets an individual term be negative. (d) is false: the linear phenomenological laws and reciprocal relations are a near-equilibrium result.

Q4 (practice). Sustained oscillations of NADH in a yeast suspension fed glucose are attributed primarily to:

  • (a) substrate limitation of hexokinase
  • (b) allosteric, autocatalytic regulation of phosphofructokinase
  • (c) slow oxygen transfer in the cuvette
  • (d) periodic transcription of glycolytic genes
Answer and explanation

(b). PFK-1 is activated by ADP, AMP and F2,6BP (the first two being products of ATP use that build up as ATP is consumed) and inhibited by ATP: positive feedback plus a delay, the standard requirements for a limit cycle. Transcriptional cycling is far too slow for a period of minutes, and the phenomenon is seen in cell-free extracts where transcription is absent.

Level 3: Part C Style

Q1 (practice). A bacterium grows aerobically on glucose with ammonia as nitrogen source and biomass composition \( \mathrm{CH_{1.8}O_{0.5}N_{0.2}} \) (24.6 g per C-mol). The measured biomass yield is \( Y_{X/S} = 0.50 \) g per g glucose and no extracellular product is formed.

(i) How many C-moles of biomass form per mole of glucose? (ii) Calculate the oxygen requirement in mol O₂ per mol glucose and in g O₂ per g glucose. (iii) Calculate the respiratory quotient. (iv) If the culture reaches 20 g L⁻¹ biomass with \( \mu = 0.20\ \mathrm{h^{-1}} \), estimate the volumetric metabolic heat load in kJ L⁻¹ h⁻¹, taking 460 kJ per mol O₂.

Answer and worked solution

(i) Biomass per mole glucose = 0.50 × 180.16 = 90.08 g = 90.08/24.6 = 3.66 C-mol.

(ii) Available-electron balance with \( \gamma_{glucose} = 4 \), \( \gamma_X = 4.2 \):

$$6(4) = 3.66(4.2) + 4a \Rightarrow 24 = 15.38 + 4a \Rightarrow a = \mathbf{2.16\ mol\ O_2}$$

Mass basis: \( 2.16 \times 32/180.16 = \mathbf{0.38\ g\ O_2\ per\ g\ glucose} \). (Equivalently \( Y_{X/O} = 90.08/(2.16 \times 32) = 1.3 \) g/g.)

(iii) Carbon balance: CO₂ = 6 − 3.66 = 2.34 mol. \( RQ = 2.34/2.16 = \mathbf{1.08} \).

(iv) Glucose consumption rate = \( \mu X/Y_{X/S} = 0.20 \times 20/0.50 = 8.0 \) g L⁻¹ h⁻¹ = 0.0444 mol L⁻¹ h⁻¹. Oxygen uptake = 0.0444 × 2.16 = 0.0959 mol L⁻¹ h⁻¹ ≈ 96 mmol L⁻¹ h⁻¹. Heat = 0.0959 × 460 = 44 kJ L⁻¹ h⁻¹ (about 12 kW per m³ — a serious cooling duty, and a hint that such a high-density culture must be run at reduced growth rate or with a cooled feed).

Q2 (practice). A 1 m³ aerobic fermenter removes heat through a jacket. Metabolic heat is 14,400 kJ h⁻¹ and the agitator delivers 1.0 kW, all of which degrades to heat. Cooling water enters at 15 °C and leaves at 25 °C; the broth is held at 30 °C. Take \( c_p \) = 4.18 kJ kg⁻¹ K⁻¹ and \( U \) = 500 W m⁻² K⁻¹.

(i) Total heat load in kW. (ii) Cooling-water flow in kg h⁻¹. (iii) Using the log-mean temperature difference, the jacket area required.

Answer and worked solution

(i) Metabolic: 14,400 kJ h⁻¹ = 14,400/3,600 = 4.0 kW. Plus agitation 1.0 kW → 5.0 kW (18,000 kJ h⁻¹).

(ii) \( \dot m = Q/(c_p\Delta T) = 18{,}000/(4.18 \times 10) = \mathbf{431\ kg\ h^{-1}} \).

(iii) Temperature differences between broth and water: at the inlet 30 − 15 = 15 K, at the outlet 30 − 25 = 5 K.

$$\Delta T_{lm} = \frac{15-5}{\ln(15/5)} = \frac{10}{1.0986} = 9.10\ \mathrm{K}$$

$$A = \frac{Q}{U\,\Delta T_{lm}} = \frac{5{,}000}{500 \times 9.10} = \mathbf{1.10\ m^2}$$

A 1 m³ vessel has a jacketed side area of roughly this order, so the duty is just feasible — which is exactly why a 100 m³ version of the same process needs internal coils. Note the answer is unchanged if you (wrongly) use the arithmetic mean 10 K only to within 10%: \( A \) = 1.0 m². Examiners choose numbers where that shortcut fails, so use the log mean.

Q3 (practice). A culture consumes oxygen at 1.0 g L⁻¹ h⁻¹. Saturation concentration under the operating gas composition and pressure is \( C^* \) = 7.0 mg L⁻¹, and the dissolved oxygen is to be held at 2.0 mg L⁻¹. Which of the following statements are correct?

(A) The required \( k_La \) is 200 h⁻¹. (B) Enriching the inlet gas to 40% O₂ roughly doubles \( C^* \) and therefore nearly halves the \( k_La \) needed. (C) Letting the dissolved oxygen fall to 1.0 mg L⁻¹ reduces the required \( k_La \) by about 17%. (D) Raising the temperature from 30 °C to 40 °C raises \( C^* \) and eases the transfer problem.

  • (a) A, B and C
  • (b) A and D only
  • (c) B, C and D
  • (d) A, B, C and D
Answer and worked solution

(a) A, B and C.

  • (A): \( \mathrm{OTR} = \mathrm{OUR} = 1.0 \) g L⁻¹ h⁻¹ = 1,000 mg L⁻¹ h⁻¹. \( k_La = 1{,}000/(7.0-2.0) = \mathbf{200\ h^{-1}} \). Correct.
  • (B): \( C^* \) follows Henry’s law and is proportional to the oxygen partial pressure; air is about 21% O₂, so 40% roughly doubles \( C^* \) to 14 mg L⁻¹. New requirement \( = 1{,}000/(14-2) = 83\ \mathrm{h^{-1}} \) — less than half. Correct.
  • (C): new driving force 7.0 − 1.0 = 6.0 mg L⁻¹; \( k_La = 1{,}000/6 = 167\ \mathrm{h^{-1}} \), a fall of \( (200-167)/200 = 16.7\% \). Correct. (In practice you would not do this if 1.0 mg L⁻¹ is below the critical DO.)
  • (D): wrong — gas solubility in water falls with temperature, so \( C^* \) drops and the oxygen problem gets worse, while the cells’ demand rises.

Quick Revision Table

ItemFact
BalanceAccumulation = In − Out + Generation − Consumption
Doubling time\( t_d = 0.693/\mu \)
Specific vs volumetric\( \mu \) (h⁻¹) vs \( r_X = \mu X \) (g L⁻¹ h⁻¹)
Ethanol from glucose0.511 g/g (and 0.489 g/g CO₂)
Biomass C-mol formula\( \mathrm{CH_{1.8}O_{0.5}N_{0.2}} \), 24.6 g per C-mol, \( \gamma = 4.2 \)
Degree of reductionC +4, H +1, O −2, N −3; \( \gamma_S n_S = \gamma_X n_X + \gamma_P n_P + 4n_{O_2} \)
RQmol CO₂ / mol O₂; ≈ 1 on glucose
Metabolic heatabout 460 kJ per mol O₂ consumed
Heat removal\( Q = UA\,\Delta T_{lm} \); \( Q = \dot m c_p \Delta T \), \( c_p \) = 4.18 kJ kg⁻¹ K⁻¹
Scale problemHeat and O₂ demand \( \propto L^3 \); area \( \propto L^2 \)
Transport analogy\( \tau = -\mu\,\mathrm{d}u/\mathrm{d}y \); \( q = -k\,\mathrm{d}T/\mathrm{d}y \); \( J = -D\,\mathrm{d}C/\mathrm{d}y \)
Groups\( Re = \rho uL/\mu \), \( Re_i = \rho N D_i^2/\mu \), \( Pr = \nu/\alpha \), \( Sc = \nu/D \), \( Sh = k_cL/D \), \( Nu = hL/k \)
RheologyMycelial and polysaccharide broths are pseudoplastic (\( n < 1 \) in \( \tau = K\dot\gamma^n \))
Oxygen transfer\( \mathrm{OTR} = k_La(C^*-C_L) \); liquid film controls; \( C^* \) about 7–8 mg L⁻¹ in air-saturated water
Entropy production\( \sigma = \sum J_iX_i \ge 0 \); individual terms may be negative (coupling)
Onsager\( L_{ik} = L_{ki} \), near-equilibrium only
Glycolytic oscillationsPFK-1 feedback; NADH, ATP/ADP oscillate; period of the order of minutes; populations synchronise

Key Takeaways

What’s Next