Skip to content

Enzyme and Microbial Technology

Industrial biocatalysis, protein engineering, immobilization methods, Thiele modulus and effectiveness factor for CSIR NET Life Sciences.

  • 19 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: The Enzyme That Got Slower and Better
  3. Why Biocatalysis
  4. Enzyme Stability and Deactivation
  5. Protein Engineering
  6. Immobilisation
  7. Diffusion in Immobilised Systems
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: The Enzyme That Got Slower and Better

How CSIR NET asks it. Part B: which immobilisation method forms covalent bonds, what happens to apparent \( K_m \) on immobilisation, what directed evolution requires, which enzyme makes which industrial product. Part C: compute an effectiveness factor from a Thiele modulus, decide whether a reaction is reaction- or diffusion-limited, compare CSTR and plug-flow residence times for an immobilised-enzyme reactor, interpret a thermal-stability dataset.


Why Biocatalysis

PropertyConsequence for industry
Chemo-, regio- and stereoselectivitySingle enantiomer without protecting groups; this is the main reason the pharmaceutical industry uses enzymes
Mild conditions (aqueous, near-neutral, 20–60 °C)Lower energy, safer plant, fewer side reactions
High rate accelerationSmall reactor volumes
Biodegradable, non-toxic catalystEasier effluent treatment
Narrow operating window; cost; stabilityThe engineering problems this page solves

Isolated enzyme or whole cell?

Isolated enzymeWhole cell
Cofactor regenerationMust be supplied or coupledDone by the cell’s own metabolism
Multi-step conversionsOne enzyme per stepA pathway in one pot
Side reactionsFewSubstrate and product may be metabolised further
Mass transferOnly through the carrierAlso across the cell envelope
DownstreamClean product streamMore impurities

Classic whole-cell transformations: steroid 11α-hydroxylation by fungi, acrylamide from acrylonitrile by nitrile hydratase in Rhodococcus, and 6-aminopenicillanic acid from penicillin G by penicillin acylase (usually used as an immobilised isolated enzyme).

Workhorse industrial enzymes

EnzymeSource typeIndustrial use
α-Amylase, glucoamylaseBacterial, fungalStarch liquefaction and saccharification
Glucose isomeraseBacterial, immobilisedGlucose → fructose (high-fructose syrup)
Proteases (subtilisin)BacillusDetergents; leather; cheese
LipasesFungal, bacterialTransesterification, resolution of racemates, detergents
Cellulases, xylanasesFungalBiofuel saccharification, textiles, paper
PectinasesFungalJuice clarification
Penicillin acylaseBacterial6-APA for semi-synthetic penicillins
Lactase (β-galactosidase)Yeast, fungalLactose-free dairy; whey processing
Glucose oxidaseAspergillusBiosensors, food preservation
DNA polymerases, ligases, restriction enzymesVariousMolecular biology reagents

Enzyme production is a fermentation problem: extracellular enzymes are preferred (no cell disruption), Bacillus and Aspergillus are the classical secretors, induction and catabolite repression control expression, and the broth goes to the downstream train. Many bulk enzymes are sold as crude concentrates: purity costs money and detergent enzymes do not need it.


Enzyme Stability and Deactivation

Thermal inactivation is usually first order in active enzyme:

$$\frac{\mathrm{d}E}{\mathrm{d}t} = -k_dE \quad\Rightarrow\quad E = E_0e^{-k_dt}, \qquad t_{1/2} = \frac{0.693}{k_d}$$
  • \( k_d \) rises sharply with temperature, so there is always an optimum operating temperature: rate rises with \( T \), but so does the loss of catalyst. The apparent “temperature optimum” of an assay depends on how long the assay lasts.
  • Half-life and total turnover number (molecules of product per molecule of enzyme over its working life) are the two numbers that decide enzyme cost per kilogram of product.
  • Stabilisation strategies: immobilisation (especially multipoint covalent attachment), crosslinking, additives (substrate, polyols, Ca²⁺ for α-amylase), non-aqueous media, and protein engineering towards thermostability (more salt bridges, disulfides, proline in loops, a tightly packed core).
  • Thermophilic sources short-cut all of this — Thermus aquaticus polymerase being the most famous example.

Protein Engineering

graph TD
    P["Need a better biocatalyst"] --> R["Rational design
structure known, hypothesis-driven
site-directed mutagenesis"] P --> D["Directed evolution
no structure needed
mutate, screen, repeat"] P --> S["Semi-rational
focused libraries at chosen sites
saturation mutagenesis"] R --> O["Improved stability, selectivity,
activity, pH range,
solvent tolerance"] D --> O S --> O

Rational design needs a structure or a good model: site-directed mutagenesis to change a catalytic or binding residue, disulfide engineering for stability, loop grafting, chimeras, and computational design.

Directed evolution mimics natural selection in the laboratory and needs three things: a library, a link between genotype and phenotype, and a screen or selection that matches what you want.

StepMethods
DiversityError-prone PCR, chemical mutagenesis, DNA shuffling (recombination of homologous genes), StEP, saturation mutagenesis at chosen codons
Genotype–phenotype linkPlasmid in a cell, phage display, ribosome display, mRNA display, in vitro compartmentalisation in emulsion droplets
Selection or screenGrowth complementation (selection, very high throughput), colorimetric or fluorescent plate screens, FACS of droplets or cells, microfluidics
IterationRecombine the best mutants and repeat

The governing maxim: you get what you screen for. Screen at the temperature, solvent and substrate the process will use, or the improvement will not transfer.

Other formats. Consensus design (take the most common residue at each position across a family) for stability; ancestral sequence reconstruction; de novo computational design; fusion to solubility or purification tags; and the production-host question — E. coli for simple proteins, yeasts and fungi for secretion, mammalian cells where glycosylation matters.


Immobilisation

graph TD
    I["Immobilisation"] --> B["Binding to a carrier"]
    I --> E["Entrapment / encapsulation"]
    I --> C["Crosslinking (carrier-free)"]
    B --> B1["Adsorption
weak forces, reversible, cheap,
leaches"] B --> B2["Ionic binding
DEAE/CM supports"] B --> B3["Covalent
via Lys amine, Cys thiol;
CNBr, glutaraldehyde, epoxy;
strong, no leaching, may lose activity"] B --> B4["Affinity / chelate
His-tag on metal support"] E --> E1["Gel entrapment
calcium alginate, carrageenan,
polyacrylamide, chitosan"] E --> E2["Membrane / microcapsule
hollow fibre, liposome"] C --> C1["Glutaraldehyde crosslinking;
CLEA / CLEC"]
MethodBinding strengthActivity retainedLeakageTypical use
AdsorptionWeakHighHighCheap, regenerable supports
IonicMediumHighMedium (salt-sensitive)Reversible immobilisation
CovalentStrongLower (active-site residues at risk)Very lowLong-running columns
EntrapmentPhysicalHigh for the enzymeDepends on pore size and molecular sizeWhole cells (alginate beads)
Encapsulation (membrane)PhysicalHighNone for large moleculesCofactor-dependent systems
Crosslinking (CLEA/CLEC)StrongVariableNoneCarrier-free, high volumetric activity

Advantages: reuse, continuous operation, product free of catalyst, often better thermal and operational stability, and the ability to run at high catalyst density. Costs: the immobilisation step itself, some loss of specific activity, and mass-transfer limitation.

What immobilisation does to the kinetics

ObservationCause
Apparent \( K_m \) rises (\( K_m^{app} > K_m \))Substrate must diffuse in; the concentration the enzyme sees is lower than the bulk
Apparent \( K_m \) falls for a charged substrate on an oppositely charged carrierPartitioning: the carrier concentrates the substrate near the enzyme
pH optimum shiftsA charged microenvironment makes the local pH differ from the bulk; a polyanionic carrier attracts H⁺, so the apparent optimum shifts to higher bulk pH
Apparent activation energy fallsDiffusion has a much lower temperature coefficient than catalysis; under strong diffusion limitation the observed \( E_a \) is roughly half the intrinsic value
Reaction order shifts towards first orderInside a diffusion-limited particle the local substrate is far below \( K_m \)

Diffusion in Immobilised Systems

External (film) limitation

Substrate must cross the stagnant film around the particle: \( J = k_s(S_b - S_s) \). The ratio of maximum reaction rate to maximum transport rate is the Damköhler number:

$$Da = \frac{\text{maximum reaction rate}}{\text{maximum mass-transfer rate}} = \frac{V_{max}}{k_sa\,S_b}$$

\( Da \ll 1 \): reaction-limited (kinetics observed are intrinsic). \( Da \gg 1 \): transport-limited (the rate is set by stirring and particle size, and looks first order in bulk substrate).

Internal diffusion: the Thiele modulus

Inside a porous particle, reaction and diffusion compete. For a first-order reaction in a sphere of radius \( R \), with effective diffusivity \( D_e \) and rate constant \( k \):

$$\boxed{\phi = R\sqrt{\frac{k}{D_e}}}\qquad\qquad \eta = \frac{3}{\phi^2}\left(\phi\coth\phi - 1\right)$$
  • \( \eta \), the effectiveness factor, is the observed rate divided by the rate with no diffusion limitation: \( 0 < \eta \le 1 \).
  • \( \phi \ll 1 \): reaction-limited, \( \eta \to 1 \), substrate penetrates the whole particle.
  • \( \phi \gg 1 \): diffusion-limited, \( \eta \approx 3/\phi \), reaction confined to a thin outer shell; the interior is dead weight.
\( \phi \)\( \eta \) (sphere)Regime
0.30.99Kinetic
1.00.94Mild
1.50.88Mild
3.00.67Intermediate
6.00.42Diffusion-limited
100.27Strongly diffusion-limited (\( 3/\phi = 0.30 \))

The levers. \( \phi \propto R\sqrt{k/D_e} \), so:

  • Halve the particle radius → \( \phi \) halves → \( \eta \) rises. The cheapest fix, limited by pressure drop in a packed bed.
  • Lower the enzyme loading (smaller \( k \)) → \( \eta \) rises, but the total activity may still fall; there is an optimum loading beyond which added enzyme is wasted.
  • More open pores (larger \( D_e \)) → \( \eta \) rises; \( D_e = D\varepsilon/\tau \) with porosity \( \varepsilon \) and tortuosity \( \tau \), so \( D_e \) is always smaller than the bulk diffusivity.

Immobilised-enzyme reactors

ReactorDesign equation (Michaelis–Menten, no diffusion limit)Comment
Batch / plug-flow (PFR, packed bed)\( V_{max}\tau = K_m\ln(S_0/S) + (S_0-S) \)Integrated MM equation; the concentration falls along the bed
CSTR (stirred, with retained beads)\( V_{max}\tau = (S_0-S)(K_m+S)/S \)Whole reactor sits at the exit substrate concentration

Because a CSTR operates everywhere at the low exit concentration, it needs a larger residence time than a PFR for the same conversion of a normal (positive-order) reaction — but it is the better choice under substrate inhibition, where low substrate is an advantage. Packed beds also give plug flow and high catalyst density but suffer pressure drop, channelling and compaction of soft gels; fluidised beds relieve that at the cost of some back-mixing.

Biosensors are the miniature case of the same physics: an enzyme immobilised on a transducer (amperometric, potentiometric, optical, thermal or piezoelectric). The classic is the glucose biosensor — glucose oxidase on an electrode, measuring either the oxygen consumed or the hydrogen peroxide produced, with mediators in later generations. A diffusion-limiting outer membrane is deliberately added so that the response is linear over a wide glucose range and insensitive to stirring.


Memory Tricks

Don’t Confuse

ThisvsThat
Thiele modulus \( \phi \) (internal diffusion)vsDamköhler number \( Da \) (external film)
Effectiveness factor \( \eta \) (\( \le 1 \))vsYield or conversion
\( D \) (bulk diffusivity)vs\( D_e = D\varepsilon/\tau \) (effective, inside pores)
Entrapment (enzyme free inside a gel)vsEncapsulation (enclosed by a membrane)
Covalent immobilisation (no leaching, some activity lost)vsAdsorption (activity kept, leaching likely)
Rational design (structure-led, few mutants)vsDirected evolution (library plus screen, no structure needed)
Error-prone PCR (point mutations)vsDNA shuffling (recombination of homologues)
CSTR (runs at exit concentration)vsPFR / packed bed (gradient along length)
Whole-cell biocatalysis (cofactors recycled)vsIsolated enzyme (cleaner, cofactor must be supplied)

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. Write the Thiele modulus for a first-order reaction in a spherical particle.
  2. Name two methods for generating diversity in a directed-evolution experiment.
  3. Which immobilisation method gives the lowest leakage, and what does it cost?
Answers
  1. \( \phi = R\sqrt{k/D_e} \).
  2. Error-prone PCR and DNA shuffling (also: saturation mutagenesis, StEP, chemical mutagenesis).
  3. Covalent attachment; it risks modifying residues in or near the active site, so specific activity usually falls.

Level 2: Part B Style

Q1 (practice). An enzyme immobilised in porous beads shows a measured reaction rate that increases when the beads are ground to half their diameter. This indicates:

  • (a) the enzyme was denatured by grinding
  • (b) the system is internal-diffusion limited
  • (c) the intrinsic \( K_m \) has changed
  • (d) the reaction is zero order in substrate
Answer and explanation

(b). Halving the radius halves \( \phi \) and raises \( \eta \). A genuinely kinetically limited system gives a rate independent of particle size; dependence on size (or on stirring, for the external film) is the standard diagnostic for mass-transfer limitation.

Q2 (practice). A biocatalyst is immobilised on a polyanionic carrier and its substrate is a cation. Compared with the free enzyme, the apparent \( K_m \) is expected to:

  • (a) increase, because of diffusional resistance only
  • (b) decrease, because the carrier concentrates the substrate near the enzyme
  • (c) be unchanged, since \( K_m \) is an intrinsic constant
  • (d) become undefined
Answer and explanation

(b). Electrostatic partitioning raises the local concentration of a counter-ionic substrate in the carrier phase, so a lower bulk concentration suffices for half-maximal rate. Diffusion pushes the other way; the observed \( K_m^{app} \) is the net of the two, and with strong partitioning it falls below the free-enzyme value.

Q3 (practice). Which statement about whole-cell biocatalysis is correct?

  • (a) Cofactor regeneration must be supplied externally.
  • (b) It is preferred when the conversion needs several enzymes in sequence and a recycled cofactor.
  • (c) It gives a cleaner product stream than an isolated enzyme.
  • (d) It avoids all mass-transfer resistance.
Answer and explanation

(b). The cell regenerates NAD(P)H and ATP with its own metabolism and holds the whole pathway in one compartment. (a) and (c) are the isolated-enzyme situation reversed; (d) is wrong because the cell envelope adds a transport resistance on top of the carrier’s.

Q4 (practice). An enzyme loses activity by first-order decay with \( k_d = 0.010\ \mathrm{h^{-1}} \) at the operating temperature. Its half-life and the fraction of activity remaining after 100 h are:

  • (a) 69 h and 0.37
  • (b) 100 h and 0.50
  • (c) 69 h and 0.50
  • (d) 139 h and 0.37
Answer and explanation

(a). \( t_{1/2} = 0.693/0.010 = \mathbf{69.3\ h} \); residual activity \( = e^{-0.010\times100} = e^{-1} = \mathbf{0.368} \). Note the two numbers are different questions — do not read the half-life off the 100 h point.

Level 3: Part C Style

Q1 (practice). An immobilised enzyme occupies spherical beads of radius 0.50 mm. The intrinsic first-order rate constant is 0.018 s⁻¹ and the effective diffusivity of substrate in the bead is 5.0 × 10⁻¹⁰ m² s⁻¹.

(i) Calculate the Thiele modulus. (ii) Calculate the effectiveness factor, using \( \eta = (3/\phi^2)(\phi\coth\phi - 1) \). (iii) What would \( \eta \) become if the beads were remade at half the radius, and what is the practical penalty of doing so in a packed bed?

Answer and worked solution

(i) \( R = 5.0\times10^{-4} \) m.

$$\phi = R\sqrt{k/D_e} = 5.0\times10^{-4}\sqrt{\frac{0.018}{5.0\times10^{-10}}} = 5.0\times10^{-4}\times\sqrt{3.6\times10^{7}} = 5.0\times10^{-4}\times 6{,}000 = \mathbf{3.0}$$

(ii) \( \coth 3.0 = 1/\tanh 3.0 = 1/0.99505 = 1.00497 \).

$$\eta = \frac{3}{9}\left(3.0\times1.00497 - 1\right) = \frac{1}{3}(2.0149) = \mathbf{0.67}$$

So the beads deliver about two-thirds of the rate the same enzyme would give free in solution.

(iii) Halving \( R \) halves \( \phi \) to 1.5. Then \( \tanh 1.5 = 0.90515 \), \( \coth 1.5 = 1.1048 \), and

$$\eta = \frac{3}{2.25}(1.5\times1.1048 - 1) = 1.3333 \times 0.6572 = \mathbf{0.88}$$

A 31% gain in catalyst utilisation. The penalty: pressure drop in a packed bed rises steeply as particle size falls (roughly with the inverse square of diameter for laminar flow), and fine particles compact, channel and blind the support. That trade-off — utilisation against pressure drop — is the central design decision for packed-bed biocatalysis, and it is why fluidised beds exist.

Q2 (practice). An immobilised enzyme preparation has \( V_{max} = 10 \) mM min⁻¹ and \( K_m = 5 \) mM (both apparent values, already including any diffusional effect). A feed of 50 mM substrate must be taken to 90% conversion.

(i) Find the required residence time in a plug-flow (packed-bed) reactor. (ii) Find it for a CSTR holding the same beads. (iii) Explain the difference, and name one situation where the CSTR would nevertheless be the better choice.

Answer and worked solution

90% conversion means \( S = 0.1 \times 50 = 5 \) mM, so \( S_0 - S = 45 \) mM.

(i) Plug flow (integrated Michaelis–Menten):

$$V_{max}\tau = K_m\ln(S_0/S) + (S_0 - S) = 5\ln(10) + 45 = 5(2.3026) + 45 = 56.51$$

$$\tau = 56.51/10 = \mathbf{5.65\ min}$$

(ii) CSTR:

$$V_{max}\tau = \frac{(S_0-S)(K_m+S)}{S} = \frac{45 \times 10}{5} = 90 \Rightarrow \tau = \mathbf{9.0\ min}$$

(iii) The CSTR needs about 1.6 times the residence time (and therefore reactor volume) because complete back-mixing forces the whole vessel to operate at the lowest substrate concentration in the process — the exit value of 5 mM — where the rate is only \( 10\times5/(5+5) = 5 \) mM min⁻¹. The plug-flow reactor starts at 50 mM, where the rate is \( 10\times50/55 = 9.1 \) mM min⁻¹, and only approaches the slow regime near the outlet.

A CSTR wins when high substrate is harmful: substrate inhibition (where the rate actually falls at high \( S \)), or a feed component that denatures the enzyme, or when the solid must be kept suspended and the bed would otherwise compact. It is also easier to control pH in a stirred vessel, which matters for reactions such as penicillin hydrolysis that release acid.

Q3 (practice). A laboratory evolves a lipase for use in 30% organic cosolvent at 50 °C. Libraries are made by error-prone PCR and screened on a chromogenic ester in aqueous buffer at 30 °C. After four rounds the best variant is 12-fold better in the screen but no better in the process. Which statements are correct?

(A) The screen did not match the process conditions, so the selected improvements need not transfer. (B) Error-prone PCR cannot generate stabilising mutations, so the result was predictable. (C) Recombining beneficial mutations by DNA shuffling and rescreening under process conditions is a rational next step. (D) A stability-focused route such as consensus design or ancestral reconstruction could complement the random approach.

  • (a) A, C and D
  • (b) A and B only
  • (c) B, C and D
  • (d) A, B, C and D
Answer and worked solution

(a) A, C and D.

  • (A) correct — “you get what you screen for” is the governing rule; a chromogenic ester at 30 °C in buffer selects for activity on that substrate under those conditions, which need not correlate with solvent tolerance at 50 °C.
  • (B) incorrect: error-prone PCR introduces point mutations anywhere, stabilising ones included; the failure here is the screen, not the mutagenesis.
  • (C) correct — shuffling recombines beneficial mutations found separately and removes hitch-hiking neutral or deleterious ones, and the rescreen must now be run in 30% cosolvent at 50 °C.
  • (D) correct — consensus design and ancestral sequence reconstruction are established routes to thermostability and can be combined with the random library as a starting scaffold.

Quick Revision Table

ItemFact
Why biocatalysisStereoselectivity, mild conditions, fewer side reactions
Whole cell vs enzymeCofactor recycling and multi-step vs cleaner product
Key enzymesGlucose isomerase (HFCS), penicillin acylase (6-APA), amylases, proteases, lipases, glucose oxidase
Deactivation\( E = E_0e^{-k_dt} \); \( t_{1/2} = 0.693/k_d \); total turnover number sets cost
Protein engineeringRational (structure-led) vs directed evolution (library + screen) vs semi-rational
DiversityError-prone PCR (points), DNA shuffling (recombination), saturation mutagenesis
DisplayPhage, ribosome, mRNA, in vitro compartmentalisation
ImmobilisationAdsorption, ionic, covalent, affinity; entrapment (alginate, carrageenan); crosslinking (CLEA)
Effects\( K_m^{app} \) up (diffusion) or down (partitioning); pH optimum shifts; apparent \( E_a \) falls
External film\( Da = V_{max}/(k_sa S_b) \); \( Da \gg 1 \) means transport control
Thiele\( \phi = R\sqrt{k/D_e} \); \( \eta = (3/\phi^2)(\phi\coth\phi-1) \); \( \eta \approx 3/\phi \) for large \( \phi \)
\( \eta \) values\( \phi \) = 1 → 0.94; 3 → 0.67; 6 → 0.42; 10 → 0.27
Effective diffusivity\( D_e = D\varepsilon/\tau \), always below bulk \( D \)
PFR\( V_{max}\tau = K_m\ln(S_0/S) + (S_0-S) \)
CSTR\( V_{max}\tau = (S_0-S)(K_m+S)/S \); larger \( \tau \), but good for substrate inhibition
BiosensorGlucose oxidase electrode; outer membrane deliberately diffusion-limiting

Key Takeaways

What’s Next