Skip to content

Cell Wall, Membranes, Transport and Electrical Properties

Cell walls, membrane models, lipid bilayer, membrane proteins, diffusion, osmosis, ion channels, pumps, transporters and membrane potential for CSIR NET.

  • 22 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: Two Monolayers Make a Bilayer
  3. Cell Walls
  4. Membrane Models: From Bilayer to Fluid Mosaic
  5. The Lipid Bilayer
  6. Membrane Proteins
  7. Movement Across Membranes
  8. Electrical Properties of Membranes
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: Two Monolayers Make a Bilayer

How CSIR NET asks it. Part B: membrane models, lipid asymmetry, which protein is which transporter type, pump stoichiometry, cell-wall chemistry of Gram-positive and Gram-negative bacteria, water potential. Part C: Nernst and Goldman calculations, FRAP or cell-fusion data, transport kinetics with inhibitors and ionophores, protease-protection experiments that decide membrane topology.


Cell Walls

A wall lies outside the plasma membrane of plants, fungi, most bacteria and archaea. It resists turgor pressure, sets cell shape and is the first barrier to pathogens and drugs.

Plant cell wall

LayerCompositionWhen it forms
Middle lamellaPectins (calcium pectate)At cytokinesis, from the cell plate; cements neighbouring cells
Primary wallCellulose microfibrils in a matrix of hemicellulose (xyloglucan in most dicots) and pectin, with structural proteins (extensins)While the cell grows; thin and extensible
Secondary wallMore cellulose, often in layers with different microfibril angles, plus ligninInside the primary wall, after growth stops (xylem, fibres)
  • Cellulose (β1→4 glucan) is made at the plasma membrane by rosette-shaped cellulose synthase complexes; cortical microtubules guide their movement and so the microfibril orientation. Hemicelluloses and pectins are made in the Golgi and secreted.
  • Acid growth: auxin promotes H⁺ extrusion; low wall pH activates expansins, which loosen hydrogen bonds between cellulose and hemicellulose so turgor can extend the wall.
  • Plasmodesmata cross the wall and connect the cytoplasm of neighbours; the central desmotubule is derived from ER.

Bacterial and archaeal cell walls

Peptidoglycan (murein) is a mesh of glycan strands of alternating N-acetylglucosamine (GlcNAc) and N-acetylmuramic acid (MurNAc), β1→4 linked, with short peptides on MurNAc (L-Ala, D-Glu, meso-diaminopimelic acid or L-Lys, D-Ala) that are cross-linked by transpeptidases (penicillin-binding proteins). Lysozyme cuts the MurNAc–GlcNAc β1→4 bond.

FeatureGram-positiveGram-negative
PeptidoglycanThick, many layersThin, one or few layers
Teichoic and lipoteichoic acidsPresentAbsent
Outer membraneAbsentPresent: inner leaflet phospholipid, outer leaflet lipopolysaccharide (LPS)
PeriplasmSmall or absentWell defined, between inner and outer membranes
PorinsAbsentTrimeric β-barrel channels in the outer membrane
Gram stainRetains crystal violet–iodine (purple)Decolourised, takes counterstain (pink)
Typical sensitivityLysozyme, penicillin GOuter membrane blocks many large or hydrophobic drugs (e.g. vancomycin)
  • LPS = lipid A (endotoxin) + core oligosaccharide + O-antigen. Braun’s lipoprotein anchors the outer membrane to peptidoglycan.
  • Mycobacteria have peptidoglycan linked to arabinogalactan and long-chain mycolic acids, giving an acid-fast, waxy, poorly permeable envelope.
  • Mycoplasma has no wall, so wall-active antibiotics do not touch it.
  • Archaea lack peptidoglycan. Some methanogens have pseudomurein (with N-acetyltalosaminuronic acid and β1→3 links, so lysozyme cannot cut it); many archaea have only a protein or glycoprotein S-layer.
  • Fungi: chitin (GlcNAc β1→4), β-glucans and mannoproteins.

Membrane Models: From Bilayer to Fluid Mosaic

Model (year)ProposalWhat it got right or wrong
Gorter–Grendel (1925)Lipid bilayerRight about the bilayer
Danielli–Davson (1935)Bilayer sandwiched between two continuous protein layersCould not explain integral proteins or the variable protein content of membranes
Robertson, unit membrane (about 1959)Trilaminar “railway track” image in electron micrographs is universalCorrect image, wrong interpretation of protein position
Singer–Nicolson, fluid mosaic (1972)Proteins float in a fluid lipid bilayer; integral proteins span itCurrent framework, refined by rafts and the cytoskeletal “fences” that restrict diffusion

Evidence for fluidity.

  • Frye–Edidin (1970): mouse and human cells fused with Sendai virus; their surface proteins, labelled with differently coloured antibodies, intermixed within about 40 minutes at 37 °C, but not at low temperature.
  • FRAP (fluorescence recovery after photobleaching): bleach a spot, measure recovery. The rate gives the diffusion coefficient; the extent gives the mobile fraction. Incomplete recovery means some proteins are tethered (to the cytoskeleton or extracellular matrix).
  • Freeze-fracture electron microscopy splits the bilayer along its middle and shows intramembrane particles (integral proteins), mostly on the P-face (protoplasmic half).

Model membranes

Model systemWhat it isUsed for
Liposomes (vesicles)Closed bilayers made by sonication or extrusion; multilamellar or unilamellar (SUV, LUV, GUV)Permeability, reconstitution of pumps and channels, drug delivery
Planar (black) lipid membranesBilayer painted across a small hole between two chambersSingle-channel electrical recording
Supported bilayersBilayer on glass or micaSurface techniques, FRAP
Micelles and detergentsSingle-chain amphiphiles that form micelles above the critical micelle concentrationSolubilising integral proteins
NanodiscsA bilayer patch bounded by a scaffold protein beltStructural studies of membrane proteins in a bilayer

Detergents. SDS (ionic) denatures proteins; Triton X-100, octyl glucoside and digitonin (non-ionic or mild) solubilise membrane proteins while often keeping them active.


The Lipid Bilayer

Composition and asymmetry

Phosphoglycerides (PC, PE, PS, PI), sphingolipids (sphingomyelin, glycolipids) and sterols (cholesterol in animals, phytosterols in plants, ergosterol in fungi; bacteria generally lack sterols, some use hopanoids). The bilayer is about 5 nm thick.

LeafletEnriched lipids (typical animal plasma membrane)
Outer (exoplasmic)Phosphatidylcholine, sphingomyelin, all glycolipids
Inner (cytosolic)Phosphatidylethanolamine, phosphatidylserine, phosphatidylinositol (and its phosphates)

Asymmetry is set up and maintained by enzymes, because spontaneous transverse movement (flip-flop) is very slow:

  • Flippases (P4-type ATPases) move PS and PE inward, using ATP.
  • Floppases (some ABC transporters) move lipids outward, using ATP.
  • Scramblases randomise lipids between leaflets without ATP; activated by Ca²⁺ and by caspases during apoptosis.

Fluidity and phase transitions

  • Lateral diffusion of lipids is fast (micrometres per second); flip-flop is extremely slow without enzymes.
  • Below its transition temperature (Tm), a bilayer is a gel (ordered); above it, a liquid-crystalline (fluid) state. Tm rises with chain length and saturation and falls with cis double bonds and shorter chains. (Dipalmitoyl PC, a pure lipid, melts at about 41 °C.)
  • Cholesterol is a fluidity buffer: above Tm its rigid ring restricts chain motion (less fluid, less permeable); below Tm it prevents tight packing (more fluid). It broadens and eventually abolishes the sharp transition.
  • Homeoviscous adaptation: bacteria and poikilotherms grown in the cold incorporate more unsaturated and shorter fatty acids to keep fluidity constant.
  • Lipid rafts: small, dynamic domains rich in cholesterol and sphingolipids, in the liquid-ordered phase, enriched in GPI-anchored proteins and some signalling proteins; resistance to cold Triton X-100 was the classic (and imperfect) test.

Membrane Proteins

ClassHow it is attachedRemoved byExamples
Integral (transmembrane)Hydrophobic segments cross the bilayerDetergents onlyGlycophorin (single pass), bacteriorhodopsin (7 TM helices), Na⁺/K⁺-ATPase, porins (β-barrel)
PeripheralIonic and H-bond contacts with lipid heads or other proteinsHigh salt, extreme pH, chelatorsSpectrin, cytochrome c
Lipid-anchoredCovalent lipidDetergents (or specific phospholipase for GPI)GPI (outer leaflet; released by PI-specific phospholipase C); myristoyl (N-terminal Gly, amide), palmitoyl (Cys, thioester, reversible), prenyl (farnesyl or geranylgeranyl on C-terminal CAAX Cys) on the cytosolic face

Transmembrane segments.

  • An α-helix of about 20 hydrophobic residues spans the hydrocarbon core (1.5 Å rise per residue × 20 ≈ 30 Å). A hydropathy plot (Kyte–Doolittle) finds such stretches.
  • Aromatic belt: Trp and Tyr cluster at the lipid–water interface; positive-inside rule: Lys and Arg are enriched on the cytosolic side of membrane proteins and help set topology.
  • β-barrels (porins, OmpF) occur only in the outer membranes of Gram-negative bacteria, mitochondria and chloroplasts. Alternate residues of each strand face the lipid, so hydropathy plots miss them.

Determining topology. Proteases or membrane-impermeant labels added to intact cells modify only extracellular domains; added to inside-out vesicles they reach cytosolic domains. Glycosylation sites are always on the exoplasmic (lumenal or extracellular) side.


Movement Across Membranes

graph TD
    T["Membrane transport"] --> P["Passive
down the electrochemical gradient"] T --> A["Active
against the gradient"] P --> SD["Simple diffusion
gases, small non-polar"] P --> CH["Channels
ions, water: fast, gated"] P --> UN["Uniporters
facilitated diffusion: saturable"] A --> PR["Primary active
ATP, light or redox"] A --> SE["Secondary active
symport or antiport,
driven by Na+ or H+ gradient"] A --> GT["Group translocation
bacterial PTS"]

Simple diffusion

Fick’s first law: \(J = -D\,\dfrac{dC}{dx}\); across a membrane, \(J = P\,(C_1 - C_2)\), where the permeability coefficient \(P = KD/x\) depends on the partition coefficient \(K\) (oil/water) and thickness \(x\).

Permeability order through a pure bilayer: gases (O₂, CO₂, N₂) and small non-polar molecules > small uncharged polar molecules (water, urea, ethanol, glycerol) > large uncharged polar molecules (glucose) > ions (essentially impermeable). Simple diffusion is not saturable and shows no specificity.

Osmosis and water potential

Water moves across a selectively permeable membrane from low to high solute concentration. Osmotic pressure follows the van ’t Hoff equation:

$$\pi = iCRT$$

with \(i\) the van ’t Hoff factor, \(C\) the molar concentration, \(R\) = 0.0821 L atm K⁻¹ mol⁻¹ (or 8.314 J K⁻¹ mol⁻¹). Physiological saline (0.15 M NaCl, \(i\) ≈ 2) at 37 °C gives π ≈ 7.6 atm.

Outside solutionEffect on an animal cellEffect on a walled plant cell
HypotonicSwells, may lyse (red cells haemolyse)Turgid; the wall prevents bursting
IsotonicNo net changeFlaccid
HypertonicShrinks (crenation)Plasmolysis (protoplast pulls away from the wall)

Tonicity is not osmolarity. A solute that crosses the membrane (urea, glycerol) does not hold water out of the cell; an isosmotic urea solution is hypotonic and lyses red cells.

Plant water potential (in MPa): \(\Psi_w = \Psi_s + \Psi_p\) (plus a gravity term for tall plants). Pure water at atmospheric pressure is 0. Solute potential \(\Psi_s = -iCRT\) is negative; pressure (turgor) potential \(\Psi_p\) is positive in turgid cells. Water moves from higher (less negative) to lower Ψw. At incipient plasmolysis, Ψp = 0 and Ψw = Ψs.

Aquaporins (Agre) are water channels: tetramers, each subunit a pore with narrow constriction that excludes protons (via the conserved NPA motifs and an aromatic/Arg filter). Aquaporin-2 is inserted into the collecting-duct membrane under vasopressin control.

Channels versus carriers

PropertyChannelsCarriers (transporters)
MechanismAqueous pore; open or closedAlternating access: binding site exposed to one side, then the other
Rate10⁷–10⁸ ions per secondTypically 10²–10⁴ molecules per second
KineticsNear-linear with gradient (until very high concentration)Saturable (Michaelis–Menten–like; Kt and Vmax)
CouplingAlways passiveCan couple to another solute’s gradient
ExamplesK⁺, Na⁺, Ca²⁺, Cl⁻ channels; aquaporinsGLUT1, lactose permease, Na⁺/glucose symporter, band 3

Transport kinetics. A uniporter obeys \(v = V_{max}[S]/(K_t + [S])\), shows stereospecificity (D-glucose, not L-glucose, for GLUT1) and can be competitively inhibited. GLUT family members differ in tissue and regulation: GLUT2 in liver, intestinal basolateral membrane and pancreatic β cells (low affinity, high capacity); GLUT4 in muscle and fat, moved from intracellular vesicles to the plasma membrane by insulin.

Ion channels

Classified by gating:

  • Voltage-gated — Na⁺ (action potential upstroke; blocked by tetrodotoxin), K⁺ (repolarisation; blocked by tetraethylammonium), Ca²⁺ (synaptic release, muscle).
  • Ligand-gated — nicotinic acetylcholine receptor (pentamer, cation channel), GABA-A and glycine receptors (Cl⁻), glutamate receptors.
  • Mechanosensitive — bacterial MscL and MscS (open in hypo-osmotic shock and release solutes), Piezo channels in animals.
  • Others: cyclic-nucleotide-gated channels, IP₃ receptors and ryanodine receptors (Ca²⁺ release from ER and SR), gap-junction connexons.

Selectivity of the K⁺ channel (MacKinnon, KcsA structure). The filter is lined by backbone carbonyl oxygens of the signature sequence TVGYG. They are spaced to replace the water shell of a dehydrated K⁺ exactly; Na⁺ is too small to be stabilised by them, so it does not shed its water. K⁺ channels pass K⁺ about 10,000 times better than Na⁺ yet still conduct near the diffusion limit, because several K⁺ ions in single file repel one another through the pore.

Voltage sensing and inactivation. The S4 helix carries regularly spaced Arg or Lys and moves outward on depolarisation, opening the gate. Voltage-gated Na⁺ channels then inactivate (an intracellular loop plugs the pore; in some K⁺ channels an N-terminal “ball and chain”), which underlies the refractory period.

Patch clamp (Neher and Sakmann) records current through a single channel: square pulses of fixed amplitude (unitary conductance) with random open times.

Active transport: pumps

Pump typePhosphorylated intermediate?ExamplesInhibitor
P-typeYes (Asp in a conserved motif), E1/E2 conformationsNa⁺/K⁺-ATPase (3 Na⁺ out, 2 K⁺ in per ATP); SERCA (2 Ca²⁺ into SR/ER per ATP); plasma-membrane Ca²⁺-ATPase; gastric H⁺/K⁺-ATPase; plant and fungal plasma-membrane H⁺-ATPase; flippasesVanadate (all P-type); ouabain and digoxin (Na⁺/K⁺); thapsigargin (SERCA); omeprazole (H⁺/K⁺)
V-typeNoAcidify lysosomes, endosomes, Golgi, secretory vesicles, plant vacuoles; osteoclast ruffled borderBafilomycin A1
F-typeNoATP synthase of mitochondria, chloroplasts and bacteria; runs in reverse as an ATP-driven H⁺ pumpOligomycin (mitochondrial F₀)
ABC transportersNo (ATP binding and hydrolysis at two nucleotide-binding domains)Bacterial importers (with periplasmic binding proteins); MDR1 (P-glycoprotein) drug efflux; CFTR (an ABC protein that is a Cl⁻ channel); TAP (peptides into ER)—

The Na⁺/K⁺-ATPase. Skou discovered it. It consumes a large fraction of a resting animal cell’s ATP (most of it in neurons), keeps intracellular Na⁺ low and K⁺ high, controls cell volume, and is electrogenic: three positive charges out for two in contributes a few millivolts to the resting potential. Cycle: 3 Na⁺ bind inside (E1) → phosphorylation of Asp → E2 conformation releases Na⁺ outside and binds 2 K⁺ → dephosphorylation → K⁺ released inside. Ouabain binds the extracellular face, so it acts only from outside.

Other primary pumps. Bacteriorhodopsin (seven TM helices, retinal chromophore) pumps H⁺ out using light; the electron transport chain pumps H⁺ using redox energy.

Secondary active transport

The energy stored in an ion gradient (made by a primary pump) drives uphill movement of another solute.

TransporterModeCoupling
SGLT1 (intestinal apical, kidney)Symport2 Na⁺ : 1 glucose into the cell
Lactose permease, LacY (E. coli)SymportH⁺ : lactose
Na⁺/Ca²⁺ exchanger (heart)Antiport3 Na⁺ in : 1 Ca²⁺ out
Na⁺/H⁺ exchangerAntiportNa⁺ in : H⁺ out (pH regulation)
Band 3 (AE1), erythrocyteAntiport (exchange, passive)Cl⁻ : HCO₃⁻ (the “chloride shift”)

Transepithelial glucose absorption shows the logic: apical SGLT1 brings glucose in with Na⁺; basolateral GLUT2 lets glucose leave down its gradient; basolateral Na⁺/K⁺-ATPase pumps the Na⁺ out and keeps the gradient. Ouabain added to the basolateral side stops glucose absorption.

Group translocation (bacteria). The phosphotransferase system (PTS) transfers phosphate from phosphoenolpyruvate via Enzyme I and HPr to Enzyme II, which phosphorylates the sugar as it enters. The product (e.g. glucose 6-phosphate) cannot leak out. PTS also mediates catabolite repression (see Microbial Physiology).

Ionophores

IonophoreTypeMoves
ValinomycinMobile carrierK⁺ (highly selective)
Gramicidin AChannel (head-to-head dimer)Monovalent cations, H⁺
NigericinCarrier, electroneutralK⁺/H⁺ exchange
A23187, ionomycinCarrierCa²⁺ (raise cytosolic Ca²⁺)
2,4-Dinitrophenol, FCCPLipophilic weak acidH⁺ (uncouplers)

Part C uses these to dissect the proton-motive force: valinomycin + K⁺ collapses Δψ; nigericin collapses ΔpH; together they abolish both.

Vesicular transport across the plasma membrane

Large molecules cross by endocytosis (phagocytosis, pinocytosis, receptor-mediated endocytosis through clathrin-coated pits) and exocytosis (constitutive or regulated). Their sorting machinery is covered in Intracellular Organelles and Protein Sorting.


Electrical Properties of Membranes

The resting membrane potential

The membrane is a capacitor (two conductors, cytosol and extracellular fluid, separated by a thin insulator), with specific capacitance close to 1 µF/cm². A voltage arises when a few ions cross a membrane that is selectively permeable.

Nernst equation — the equilibrium potential of a single ion X with charge z:

$$E_X = \frac{RT}{zF}\ln\frac{[X]_{out}}{[X]_{in}} = \frac{61.5\ \text{mV}}{z}\log_{10}\frac{[X]_{out}}{[X]_{in}} \quad (37\ ^\circ\text{C})$$

(58.2 mV at 20 °C; 59.2 mV at 25 °C.)

Typical mammalian values (illustrative; they vary between cell types):

IonInside (mM)Outside (mM)Equilibrium potential at 37 °C
K⁺1405about −89 mV
Na⁺12145about +67 mV
Cl⁻10110about −64 mV
Ca²⁺0.00011.2about +125 mV

Goldman–Hodgkin–Katz (GHK) equation — the steady potential when several ions permeate:

$$V_m = \frac{RT}{F}\ln\frac{P_K[K^+]_o + P_{Na}[Na^+]_o + P_{Cl}[Cl^-]_i}{P_K[K^+]_i + P_{Na}[Na^+]_i + P_{Cl}[Cl^-]_o}$$

Note that Cl⁻ appears with inside and outside swapped because of its negative charge. At rest, \(P_K\) dominates, so \(V_m\) (about −60 to −70 mV in neurons) lies close to \(E_K\) but a little positive because of the small Na⁺ leak. During the action potential’s upstroke \(P_{Na}\) rises transiently and \(V_m\) swings towards \(E_{Na}\).

How few ions it takes. Charging 1 cm² of membrane by 100 mV needs \(Q = CV = 10^{-7}\) C, about 6 × 10¹¹ monovalent ions — a tiny fraction of the ions in a cell (see Level 3 Q1). So the potential changes without measurable change in bulk concentrations, and bulk electroneutrality holds.

Donnan equilibrium. Impermeant charged macromolecules inside a cell (proteins, nucleic acids, mostly negative) cause an unequal distribution of permeant ions at equilibrium: \([K^+]_i[Cl^-]_i = [K^+]_o[Cl^-]_o\). This creates an osmotic imbalance that cells must counter by pumping (the Na⁺/K⁺-ATPase), or swell; plant and bacterial cells resist with their walls.

Passive (cable) properties and conduction

  • Length constant \(\lambda = \sqrt{r_m/r_i}\): how far a voltage change spreads passively. Larger axon diameter (lower \(r_i\)) and higher membrane resistance (myelin) increase λ.
  • Time constant \(\tau = r_m c_m\): how fast the membrane charges.
  • Myelin raises membrane resistance and lowers capacitance; action potentials regenerate only at nodes of Ranvier, where voltage-gated Na⁺ channels cluster (saltatory conduction).

Memory Tricks

Don’t Confuse

ThisvsThat
Osmolarity: total solute particlesvsTonicity: effect on cell volume (only impermeant solutes count)
Channel: pore, 10⁷–10⁸ ions/s, not saturable at physiological levelsvsCarrier: alternating access, saturable, slower
Primary active (ATP, light, redox)vsSecondary active (uses an ion gradient)
Flippase (inward, P4-ATPase)vsScramblase (both ways, no ATP)
Gram-positive: thick PG, teichoic acidsvsGram-negative: thin PG, outer membrane with LPS
Pseudomurein (some archaea, β1→3, lysozyme-resistant)vsMurein (bacteria, β1→4)
Equilibrium potential (one ion, Nernst)vsResting potential (several ions, GHK)
GPI anchor: outer leafletvsPrenyl, myristoyl, palmitoyl: cytosolic leaflet

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. Which phospholipid is enriched in the inner leaflet and exposed during apoptosis?
  2. What is the stoichiometry of the Na⁺/K⁺-ATPase per ATP hydrolysed?
  3. Name the polymer that cements adjacent plant cells in the middle lamella.
Answers
  1. Phosphatidylserine.
  2. 3 Na⁺ out and 2 K⁺ in per ATP.
  3. Pectin (calcium pectate).

Level 2: Part B Style

Q1 (practice). A membrane protein is labelled by a membrane-impermeant reagent in intact cells but not in inside-out vesicles; it is released from membranes by phosphatidylinositol-specific phospholipase C. The protein is most likely:

  • (a) a prenylated cytosolic protein
  • (b) a GPI-anchored protein on the outer leaflet
  • (c) a multipass integral protein with a cytosolic C-terminus
  • (d) a peripheral protein bound to spectrin
Answer and explanation

(b). Labelling only from outside places it on the exoplasmic face; release by PI-PLC is diagnostic of a GPI anchor. Prenylated and spectrin-bound proteins are cytosolic; a multipass integral protein would not be released by a phospholipase.

Q2 (practice). At 37 °C a cell has [K⁺]in = 140 mM and [K⁺]out = 5 mM. The K⁺ equilibrium potential is closest to:

  • (a) −89 mV
  • (b) −61 mV
  • (c) +89 mV
  • (d) −36 mV
Answer and explanation

(a). \(E_K = 61.5\log_{10}(5/140) = 61.5 \times (-1.447) = -89\) mV. The negative sign follows because K⁺ is concentrated inside and tends to leave.

Q3 (practice). Which pairing of transporter and transport mechanism is incorrect?

  • (a) SGLT1 — Na⁺-coupled symport
  • (b) Band 3 — Cl⁻/HCO₃⁻ antiport
  • (c) SERCA — V-type ATPase
  • (d) MDR1 — ABC transporter
Answer and explanation

(c). SERCA is a P-type ATPase (phosphorylated Asp intermediate, inhibited by thapsigargin and vanadate). V-type ATPases acidify lysosomes, endosomes and vacuoles.

Q4 (practice). A plant cell with solute potential −0.8 MPa and pressure potential +0.3 MPa is placed in a solution of water potential −0.6 MPa. What happens immediately?

  • (a) Water enters the cell
  • (b) Water leaves the cell
  • (c) No net water movement
  • (d) The cell plasmolyses at once
Answer and explanation

(b). Cell Ψw = −0.8 + 0.3 = −0.5 MPa, which is higher (less negative) than −0.6 MPa outside. Water moves from higher to lower Ψw, so it leaves the cell until turgor falls and Ψw equalises. Plasmolysis requires Ψp to reach zero first, so it is not immediate.

Level 3: Part C Style

Q1 (practice). A spherical cell of radius 10 µm has membrane capacitance 1 µF/cm² and cytosolic [K⁺] of 140 mM. (i) How many monovalent ions must cross the membrane to change its potential by 100 mV? (ii) What fraction of the cell’s K⁺ is this? (iii) What does the answer imply about bulk electroneutrality?

Answer and worked solution
  1. Area \(A = 4\pi r^2 = 4\pi(10^{-3}\ \text{cm})^2 = 1.26\times10^{-5}\) cm². Charge per cm²: \(Q = CV = 10^{-6} \times 0.1 = 10^{-7}\) C, i.e. \(10^{-7}/1.602\times10^{-19} = 6.2\times10^{11}\) ions/cm². For the cell: \(6.2\times10^{11}\times1.26\times10^{-5} \approx 7.8\times10^6\) ions.
  2. Volume \(= \tfrac{4}{3}\pi r^3 = 4.19\times10^{-12}\) L. K⁺ ions \(= 4.19\times10^{-12}\times0.14\times6.022\times10^{23} = 3.5\times10^{11}\). Fraction \(= 7.8\times10^6/3.5\times10^{11} \approx 2\times10^{-5}\) (0.002%).
  3. The potential is set by a thin layer of charge at the membrane; bulk concentrations stay unchanged and each compartment remains electroneutral. That is why the Nernst and GHK equations can use the bulk concentrations.

Q2 (practice). A neuron at 37 °C has [K⁺]o = 5, [K⁺]i = 140, [Na⁺]o = 145, [Na⁺]i = 15 mM. Treat Cl⁻ as passively distributed and ignore it. The resting permeability ratio is \(P_K : P_{Na}\) = 1 : 0.05.

(i) Calculate the resting potential with the GHK equation. (ii) If \(P_{Na}\) transiently rises to 20 times \(P_K\), what is the new potential? (iii) Which statements are correct?

(A) The resting potential lies between E_K and E_Na but much nearer E_K. (B) Raising [K⁺]o to 20 mM would depolarise the cell. (C) Ouabain would hyperpolarise the cell within milliseconds by stopping the pump. (D) Tetrodotoxin would leave the resting potential nearly unchanged.

  • (a) A, B and D
  • (b) A and C only
  • (c) B, C and D
  • (d) A, B, C and D
Answer and worked solution
  1. \(V_m = 61.5\log_{10}\dfrac{5 + 0.05\times145}{140 + 0.05\times15} = 61.5\log_{10}\dfrac{12.25}{140.75} = 61.5\times(-1.060) \approx -65\) mV.
  2. \(V_m = 61.5\log_{10}\dfrac{5 + 20\times145}{140 + 20\times15} = 61.5\log_{10}\dfrac{2905}{440} = 61.5\times0.820 \approx +50\) mV, approaching \(E_{Na}\) (\(61.5\log(145/15) \approx +61\) mV) as in the action-potential peak.
  3. (a) A, B and D. (A) E_K ≈ −89, E_Na ≈ +61; −65 mV is nearer E_K. (B) True: \(61.5\log((20+7.25)/140.75) \approx -44\) mV, a depolarisation. (C) False: stopping the electrogenic pump removes a small hyperpolarising current, so the cell depolarises slightly at once, then slowly more as gradients run down. (D) True: TTX blocks voltage-gated Na⁺ channels, which are largely closed at rest.

Q3 (practice). Glucose uptake into isolated intestinal epithelial sheets is measured. Results (relative uptake, control = 100):

ConditionUptake
Control (Na⁺ Ringer)100
Na⁺ replaced by choline8
Ouabain on the basolateral side, 30 min15
Ouabain on the apical side, 30 min98
Phlorizin on the apical side10
L-glucose instead of D-glucose5

Which conclusions are justified?

(A) Apical uptake is Na⁺-coupled and stereospecific. (B) The Na⁺/K⁺-ATPase is on the basolateral membrane and maintains the Na⁺ gradient that drives uptake. (C) Glucose enters by simple diffusion. (D) Phlorizin acts on the apical Na⁺–glucose symporter.

  • (a) A, B and D
  • (b) A and C
  • (c) B and C
  • (d) C and D
Answer and worked solution

(a).

  • Na⁺ removal abolishes uptake → Na⁺-coupled; L-glucose not taken up → stereospecific carrier, not simple diffusion (so C is false).
  • Ouabain works only basolaterally → the pump is there; its inhibition dissipates the Na⁺ gradient over time and uptake falls.
  • Phlorizin, applied apically, blocks uptake → it inhibits the apical symporter (SGLT1 is its classical target).

Quick Revision Table

ItemFact
Plant wallCellulose (made at PM), hemicellulose + pectin (made in Golgi); secondary wall + lignin
Gram-negative envelopeInner membrane, thin PG, periplasm, outer membrane with LPS (lipid A = endotoxin)
ArchaeaNo peptidoglycan; pseudomurein in some methanogens; S-layers
Membrane modelsGorter–Grendel 1925 bilayer → Danielli–Davson 1935 → Robertson unit membrane → Singer–Nicolson 1972 fluid mosaic
Fluidity evidenceFrye–Edidin heterokaryon (1970), FRAP
AsymmetryOuter: PC, SM, glycolipids; inner: PS, PE, PI
CholesterolFluidity buffer
TM helixAbout 20 hydrophobic residues; β-barrels in outer membranes
Lipid anchorsGPI outside; myristoyl, palmitoyl, prenyl inside
PermeabilityGases > small polar > glucose > ions
Osmotic pressureπ = iCRT; Ψw = Ψs + Ψp
Channels vs carriers10⁷–10⁸/s, gated vs saturable alternating access
K⁺ filterTVGYG; carbonyl oxygens replace hydration shell
Na⁺/K⁺-ATPaseP-type, 3 Na⁺ out, 2 K⁺ in, ouabain (outside)
Pump classesP (vanadate), V (bafilomycin), F (oligomycin), ABC (MDR1, CFTR)
SGLT12 Na⁺ : 1 glucose; GLUT2 basolateral
IonophoresValinomycin K⁺; nigericin K⁺/H⁺; A23187 Ca²⁺; DNP H⁺
Nernst(61.5/z) log(out/in) mV at 37 °C
GHKCl⁻ terms inverted; Vm near E_K at rest
CapacitanceAbout 1 µF/cm²

Key Takeaways

What’s Next