Band Theory: Metals, Insulators and Semiconductors
CSIR NET Part C: Bloch theorem, Kronig–Penney, nearly-free and tight-binding bands, effective mass and holes, metals vs insulators, doped semiconductors.
- 18 min
On this page · 15 sections
Prerequisites
- Bravais and Reciprocal Lattices, Diffraction and the Structure Factor: reciprocal lattice vectors and Brillouin zones; band gaps open exactly on the zone faces.
- Free Electron Theory, Drude Model, Hall Effect and Thermoelectric Power: the free-electron Fermi sphere, which band theory deforms.
- One-Dimensional Problems: Box, Oscillator and Tunnelling: matching conditions at potential steps, used in the Kronig–Penney model.
- Perturbation Theory and the Variational Method: degenerate perturbation theory gives the gap \( 2|U_G| \).
The Hook: Why Is Diamond an Insulator and Sodium a Metal?
Bloch’s Theorem
For a potential with the lattice periodicity, \( U(\mathbf{r} + \mathbf{R}) = U(\mathbf{r}) \), the eigenstates can be chosen as
$$\boxed{\psi_{n\mathbf{k}}(\mathbf{r}) = e^{i\mathbf{k}\cdot\mathbf{r}}u_{n\mathbf{k}}(\mathbf{r}), \qquad u_{n\mathbf{k}}(\mathbf{r} + \mathbf{R}) = u_{n\mathbf{k}}(\mathbf{r})}$$or equivalently \( \psi(\mathbf{r} + \mathbf{R}) = e^{i\mathbf{k}\cdot\mathbf{R}}\psi(\mathbf{r}) \). Consequences:
- \( \mathbf{k} \) is defined only up to a reciprocal lattice vector, so it can be restricted to the first Brillouin zone (reduced zone scheme). \( \hbar\mathbf{k} \) is the crystal momentum, not the true momentum.
- For each \( \mathbf{k} \) there are many solutions, labelled by the band index \( n \): \( E_n(\mathbf{k}) \), periodic in the reciprocal lattice.
- With \( N \) primitive cells and periodic boundary conditions, each band has \( N \) values of \( \mathbf{k} \); with spin, each band holds \( 2N \) electrons, i.e. two per primitive cell.
- Electrons in a perfect periodic lattice are not scattered: resistance comes only from departures from periodicity (phonons, impurities, defects).
- Group velocity \( \mathbf{v} = \hbar^{-1}\nabla_\mathbf{k}E \); in an external force, \( \hbar\,d\mathbf{k}/dt = \mathbf{F} \) (semiclassical dynamics).
The Kronig–Penney Model
A 1D periodic array of square wells (period \( a \)). In the limit of narrow, high barriers (a lattice of delta functions of strength set by \( P \)), matching the solutions and imposing Bloch’s condition gives
$$\boxed{P\frac{\sin\alpha a}{\alpha a} + \cos\alpha a = \cos ka}, \qquad \alpha = \frac{\sqrt{2mE}}{\hbar}$$with \( P = mV_0ba/\hbar^2 \) for barriers of height \( V_0 \) and width \( b \) (\( V_0b \) held fixed as \( b \to 0 \)).
- The right side lies between \( -1 \) and \( +1 \). Energies for which the left side falls outside that range are forbidden: these are the gaps.
- Band edges occur where \( \cos ka = \pm1 \), i.e. \( k = 0 \) or \( \pm\pi/a \): gaps open at the zone boundary.
- \( P \to 0 \): \( \cos\alpha a = \cos ka \), so \( E = \hbar^2k^2/2m \): free electrons, no gaps.
- \( P \to \infty \): allowed only where \( \sin\alpha a = 0 \), \( \alpha a = n\pi \): discrete levels of isolated wells of width \( a \), \( E_n = n^2\pi^2\hbar^2/2ma^2 \). Bands shrink to lines.
- As energy rises, the left side’s oscillation amplitude \( P/\alpha a \) falls: allowed bands get wider and gaps narrower.
Two Opposite Approximations
Nearly free electrons
Start from free electrons and treat the weak periodic potential \( U(\mathbf{r}) = \sum_\mathbf{G}U_\mathbf{G}e^{i\mathbf{G}\cdot\mathbf{r}} \) as a perturbation. Away from zone faces it shifts energies only in second order. At a zone face the free-electron states \( \mathbf{k} \) and \( \mathbf{k} - \mathbf{G} \) are degenerate (that is the Bragg condition \( 2\mathbf{k}\cdot\mathbf{G} = G^2 \)), and degenerate perturbation theory splits them:
$$E_\pm = E^0 \pm |U_\mathbf{G}| \qquad \Rightarrow \qquad \boxed{E_g = 2|U_\mathbf{G}|}$$In 1D at \( k = \pi/a \) the two standing waves are \( \psi_+ \propto \cos(\pi x/a) \) (charge piled on the ions, lower energy for an attractive ionic potential) and \( \psi_- \propto \sin(\pi x/a) \) (charge between the ions, higher energy). Below the gap the band flattens and curves down; above it curves up.
Tight binding
Start from atomic orbitals \( \phi(\mathbf{r} - \mathbf{R}) \) of energy \( \varepsilon_0 \) and let them overlap weakly with nearest neighbours (hopping integral \( \gamma > 0 \) for an s orbital, sign convention as written below). The Bloch sum \( \psi_\mathbf{k} = N^{-1/2}\sum_\mathbf{R}e^{i\mathbf{k}\cdot\mathbf{R}}\phi(\mathbf{r} - \mathbf{R}) \) gives
$$E(\mathbf{k}) = \varepsilon_0 - \beta - \gamma\sum_{\text{nn }\boldsymbol\rho}e^{i\mathbf{k}\cdot\boldsymbol\rho}$$| Lattice (spacing \( a \)) | \( E(\mathbf{k}) - (\varepsilon_0 - \beta) \) | Bandwidth |
|---|---|---|
| 1D chain | \( -2\gamma\cos ka \) | \( 4\gamma \) |
| 2D square | \( -2\gamma(\cos k_xa + \cos k_ya) \) | \( 8\gamma \) |
| Simple cubic | \( -2\gamma(\cos k_xa + \cos k_ya + \cos k_za) \) | \( 12\gamma \) |
| bcc (8 nn) | \( -8\gamma\cos\tfrac{k_xa}{2}\cos\tfrac{k_ya}{2}\cos\tfrac{k_za}{2} \) | \( 16\gamma \) |
| fcc (12 nn) | \( -4\gamma(\cos\tfrac{k_xa}{2}\cos\tfrac{k_ya}{2} + \text{2 cyclic terms}) \) | \( 16\gamma \) |
General rule: bandwidth \( = 2z\gamma \) for a lattice in which the band top has all \( z \) nearest-neighbour phases equal to \( -1 \) (sc, bcc, square, chain). fcc is the exception (it cannot make all 12 phases \( -1 \) at once), giving \( 16\gamma \) rather than \( 24\gamma \). Narrow bands come from small overlap: inner shells, d and f electrons, large interatomic distances.
Effective Mass and Holes
Effective mass
Near a band extremum, \( E \approx E_0 + \hbar^2(k - k_0)^2/2m^* \) with
$$\boxed{\frac{1}{m^*} = \frac{1}{\hbar^2}\frac{d^2E}{dk^2}} \qquad \text{(a tensor in 3D: } (M^{-1})_{ij} = \hbar^{-2}\partial^2E/\partial k_i\partial k_j)$$- Strong curvature (wide band) means a small \( m^* \); flat bands mean heavy carriers.
- For the 1D tight-binding band \( -2\gamma\cos ka \): \( m^* = \hbar^2/(2\gamma a^2) \) at \( k = 0 \), \( -\hbar^2/(2\gamma a^2) \) at \( k = \pi/a \), and infinite at \( k = \pi/2a \) (inflection point, where the group velocity is a maximum).
- Example: \( \gamma = 1 \) eV, \( a = 0.3 \) nm gives \( m^* \approx 0.42m_e \) at the band bottom.
Under a steady force, \( k \) moves uniformly across the zone; the velocity \( \hbar^{-1}dE/dk \) rises, falls and reverses as \( k \) passes the inflection point and reaches the zone boundary. Without scattering the electron would oscillate (Bloch oscillations); in real solids scattering intervenes first.
Holes
A completely filled band carries no current: for every \( \mathbf{k} \) there is \( -\mathbf{k} \) with opposite velocity. If one electron is missing near the top of a band, the band’s current, response to fields and Hall coefficient are those of a single particle with
| Property | Hole | (Missing electron) |
|---|---|---|
| Charge | \( +e \) | \( -e \) |
| Wavevector | \( \mathbf{k}_h = -\mathbf{k}_e \) | \( \mathbf{k}_e \) |
| Energy | \( E_h = -E_e \) | \( E_e \) |
| Velocity | \( \mathbf{v}_h = \mathbf{v}_e \) | \( \mathbf{v}_e \) |
| Effective mass | \( m_h^* = -m_e^* > 0 \) | negative near band top |
Holes explain the positive Hall coefficients met on the previous page.
Metals, Insulators, Semimetals
Since each band holds two electrons per primitive cell:
| Electron count per primitive cell | Possible outcome |
|---|---|
| Odd | partly filled band: metal (alkali metals, noble metals, Al with 3) |
| Even, bands do not overlap | filled bands with a gap: insulator or semiconductor (diamond, Si, Ge with 8 per 2-atom cell) |
| Even, bands overlap in energy | two partly filled bands: metal (divalent Be, Mg, Ca, Zn) or semimetal if the overlap is tiny (Bi, Sb, As, graphite) |
Insulators and semiconductors differ only in gap size. At room temperature \( k_BT \approx 0.026 \) eV, so a gap of about 1 eV (Si about 1.1 eV, Ge about 0.7 eV, GaAs about 1.4 eV) allows a small thermal population, while diamond (about 5.5 eV) is effectively empty. The conventional dividing line of 2–4 eV is a convention, not a law.
Direct and indirect gaps
If the valence-band maximum and conduction-band minimum occur at the same \( \mathbf{k} \), the gap is direct (GaAs): a photon of energy \( E_g \) can make the transition alone, and recombination emits light efficiently (LEDs, lasers). If they occur at different \( \mathbf{k} \), the gap is indirect (Si, Ge): a photon carries negligible momentum, so the transition needs a phonon, making absorption near the edge weak and light emission inefficient. The absorption edge wavelength is \( \lambda(\text{nm}) \approx 1240/E_g(\text{eV}) \).
Semiconductors
Intrinsic carriers
With parabolic bands and non-degenerate (Boltzmann) statistics:
$$n = N_ce^{-(E_c - \mu)/k_BT}, \quad p = N_ve^{-(\mu - E_v)/k_BT}, \quad N_{c,v} = 2\left(\frac{2\pi m_{e,h}^*k_BT}{h^2}\right)^{3/2}$$The product is independent of \( \mu \), the law of mass action:
$$\boxed{np = n_i^2 = N_cN_ve^{-E_g/k_BT}, \qquad n_i \propto T^{3/2}e^{-E_g/2k_BT}}$$In an intrinsic sample \( n = p = n_i \) and the chemical potential (Fermi level) sits at
$$\mu_i = \frac{E_c + E_v}{2} + \frac34k_BT\ln\frac{m_h^*}{m_e^*}$$mid-gap at \( T = 0 \), drifting towards the band with the lighter carriers. For \( m_e^* = m \), \( N_c \approx 2.5\times10^{25} \) m\( ^{-3} \) at 300 K.
Doping
- Donors (group V in Si) give electrons: \( n \)-type. Acceptors (group III) take electrons: \( p \)-type.
- A donor is a hydrogen atom scaled by the host: binding energy and orbit radius
For \( \varepsilon_r = 12 \), \( m^* = 0.2m \): \( E_d \approx 19 \) meV and \( a_d \approx 3.2 \) nm, many lattice spacings, which justifies the continuum treatment. Since \( E_d \lesssim k_BT \) at room temperature, donors are almost fully ionised.
- In the extrinsic range of an \( n \)-type sample, \( n \approx N_D \), \( p = n_i^2/N_D \), and \( \mu - \mu_i = k_BT\ln(N_D/n_i) \).
Conductivity versus temperature
$$\sigma = e(n\mu_e + p\mu_h)$$| Region | Carriers | \( \ln n \) versus \( 1/T \) |
|---|---|---|
| Freeze-out (low \( T \)) | donors partly ionised | slope about \( -E_d/2k_B \) (uncompensated) |
| Extrinsic (saturation) | \( n \approx N_D \), constant | flat; \( \sigma \) follows mobility, falling with \( T \) |
| Intrinsic (high \( T \)) | \( n \approx n_i \) | slope \( -E_g/2k_B \) |
In the intrinsic region the mobility varies only as a power of \( T \), so \( \ln\sigma \) against \( 1/T \) is nearly straight with slope \( -E_g/2k_B \). Conductivity rising with temperature is the signature of a semiconductor; a metal’s falls.
Memory Tricks
- “Two per cell per band.” Odd count: metal. Even count: insulator unless bands overlap.
- Tight-binding width “2 z gamma” for chain (4), square (8), sc (12), bcc (16); fcc is the odd one (16, not 24).
- Gap = twice the Fourier component, opening where Bragg reflection happens: the zone face.
- “Half the gap in the exponent.” \( n_i \propto e^{-E_g/2k_BT} \); \( np \propto e^{-E_g/k_BT} \).
- Donor = hydrogen with \( m^*/\varepsilon_r^2 \) energy and \( \varepsilon_r/m^* \) radius.
Don’t Confuse
| This | vs | That |
|---|---|---|
| Crystal momentum \( \hbar\mathbf{k} \) (defined up to \( \hbar\mathbf{G} \)) | True momentum of the electron | |
| Group velocity \( \hbar^{-1}dE/dk \): zero at zone boundary | Phase velocity \( E/\hbar k \) | |
| Semimetal: tiny band overlap, small \( n \) and \( p \) | Semiconductor: small gap, carriers only thermally | |
| Direct gap (GaAs): efficient light emission | Indirect gap (Si, Ge): phonon needed | |
| Intrinsic Fermi level near mid-gap | Extrinsic: \( \mu - \mu_i = k_BT\ln(N_D/n_i) \) | |
| Hole effective mass positive at band top | Electron effective mass negative at band top |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Use \( k_B = 8.617\times10^{-5} \) eV K\( ^{-1} \), \( \hbar = 1.055\times10^{-34} \) J s, \( m_e = 9.11\times10^{-31} \) kg.
Level 1: Foundation
- How many electrons (including spin) can one band hold in a crystal of \( N \) primitive cells?
- In the Kronig–Penney model, what happens to the bands as the barrier strength \( P \to \infty \)?
- Is silicon a direct-gap or an indirect-gap semiconductor?
Answers
- \( 2N \): \( N \) allowed \( \mathbf{k} \) values, two spins each.
- They shrink to the discrete levels of isolated wells, \( \alpha a = n\pi \).
- Indirect.
Level 2: Part B Style
Practice Q1. An electron in a 1D tight-binding band \( E(k) = E_0 - 2\gamma\cos ka \), with \( \gamma = 1.0 \) eV and \( a = 0.30 \) nm. Its effective mass at the band bottom is closest to:
(a) \( 0.21m_e \) (b) \( 0.42m_e \) (c) \( 0.85m_e \) (d) \( 2.4m_e \)
Answer: (b) 0.42 mₑ
\( d^2E/dk^2 = 2\gamma a^2\cos ka = 2\gamma a^2 \) at \( k = 0 \). \( m^* = \hbar^2/(2\gamma a^2) = (1.055\times10^{-34})^2/(2\times1.602\times10^{-19}\times9\times10^{-20}) = 3.86\times10^{-31} \) kg \( = 0.42m_e \). (a) uses \( 4\gamma \) in the denominator.
Practice Q2. A semiconductor has \( \varepsilon_r = 12 \) and conduction-band effective mass \( 0.20m_e \). The ionisation energy of a hydrogen-like donor is closest to:
(a) 1.6 meV (b) 19 meV (c) 0.23 eV (d) 1.1 eV
Answer: (b) 19 meV
\( E_d = 13.6\times0.20/144 = 0.0189 \) eV. (c) forgets to square \( \varepsilon_r \); (a) divides by \( \varepsilon_r^3 \) instead.
Practice Q3. In the nearly-free-electron model, the Fourier component of the lattice potential at the shortest \( G \) is \( U_G = -0.4 \) eV. The gap at the corresponding zone boundary is:
(a) 0.2 eV (b) 0.4 eV (c) 0.8 eV (d) 1.6 eV
Answer: (c) 0.8 eV
\( E_g = 2|U_G| \). The sign of \( U_G \) decides which standing wave is lower, not the size of the gap.
Practice Q4. For an intrinsic semiconductor with \( E_g = 1.1 \) eV, the ratio \( n_i(350\text{ K})/n_i(300\text{ K}) \), including the \( T^{3/2} \) factor, is closest to:
(a) 5 (b) 26 (c) 70 (d) 700
Answer: (b) 26
\( (350/300)^{3/2}\exp\left[\dfrac{1.1}{2\times8.617\times10^{-5}}\left(\dfrac{1}{300} - \dfrac{1}{350}\right)\right] = 1.26\times20.9 = 26.3 \). (d) uses \( E_g/k_BT \) without the factor 2.
Level 3: Part C Style
Practice Q5. Electrons move in the 1D tight-binding band \( E(k) = -2\gamma\cos ka \) (\( \gamma > 0 \)). Consider:
- The bandwidth is \( 4\gamma \).
- The group velocity is largest at \( k = \pi/2a \).
- The effective mass is negative for \( \pi/2a < |k| \leq \pi/a \).
- If the chain has one electron per site (two spin states per \( k \)), the band is completely filled and the chain is an insulator.
Which are correct?
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
- From \( -2\gamma \) to \( +2\gamma \): \( 4\gamma \). True.
- \( v = 2\gamma a\sin(ka)/\hbar \), maximum at \( ka = \pi/2 \). True.
- \( d^2E/dk^2 = 2\gamma a^2\cos ka < 0 \) for \( |ka| > \pi/2 \). True.
- One electron per site fills half of the \( 2N \) states: up to \( |k| = \pi/2a \). The band is half full and the chain is a metal (within this model). False.
Practice Q6. A two-dimensional square lattice (spacing \( a \)) of divalent atoms is treated in the nearly-free-electron model. Consider:
- The free-electron Fermi circle has radius \( k_F = \sqrt{4\pi}/a \approx 3.54/a \).
- The Fermi circle extends beyond the zone face at \( k_x = \pi/a \) but does not reach the zone corner.
- For a very weak periodic potential, the first band is partly empty and the second band partly filled, so the solid is a metal.
- However weak the potential, the solid must be an insulator because the electron count per cell is even.
Which are correct?
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 3 and 4 only (d) 1, 2 and 4 only
Answer: (b) 1, 2 and 3 only
- Two electrons per cell of area \( a^2 \): \( 2\times\pi k_F^2/(2\pi)^2 = 2/a^2 \Rightarrow k_F^2 = 4\pi/a^2 \). True.
- \( \pi = 3.14 < 3.54 < \pi\sqrt2 = 4.44 \). True.
- The occupied region spills into the second zone while the first-zone corners stay empty: overlapping bands, a metal. True.
- An even count is necessary for an insulator but not sufficient; overlapping bands give a metal unless the gaps exceed the overlap. False.
Practice Q7. The conductivity of a pure semiconductor is \( 1.0 \) S m\( ^{-1} \) at 400 K and 100 S m\( ^{-1} \) at 500 K. Neglect the temperature dependence of mobilities and of \( N_cN_v \). Consider:
- The band gap is about 1.6 eV.
- The absorption edge lies near 780 nm.
- At 600 K the conductivity would be about \( 2.2\times10^3 \) S m\( ^{-1} \).
- If the gap were half as large, the conductivity ratio between 500 K and 400 K would be 50.
Which are correct?
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1 and 3 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
- \( E_g = 2k_B\ln100/(1/400 - 1/500) = 1.59 \) eV. True.
- \( 1240/1.59 \approx 781 \) nm. True.
- \( \sigma(600)/\sigma(500) = \exp[(E_g/2k_B)(1/500 - 1/600)] \). With \( E_g/2k_B = 9210 \) K and \( 1/500 - 1/600 = 3.33\times10^{-4} \) K\( ^{-1} \), the exponent is 3.07 and the factor 21.5, giving about \( 2.2\times10^3 \) S m\( ^{-1} \). True.
- Halving \( E_g \) halves the exponent: ratio \( \sqrt{100} = 10 \), not 50. False.
Quick Revision Table
| Idea | Formula or fact |
|---|---|
| Bloch | \( \psi = e^{i\mathbf{k}\cdot\mathbf{r}}u_\mathbf{k}(\mathbf{r}) \); \( 2N \) states per band |
| Kronig–Penney | \( P\sin\alpha a/\alpha a + \cos\alpha a = \cos ka \) |
| Nearly free | gap \( 2\vert U_G\vert \) at zone face |
| Tight binding | chain \( -2\gamma\cos ka \), width \( 4\gamma \); sc width \( 12\gamma \) |
| Effective mass | \( 1/m^* = \hbar^{-2}d^2E/dk^2 \); chain bottom \( \hbar^2/2\gamma a^2 \) |
| Holes | charge \( +e \), \( m_h^* = -m_e^* \), \( \mathbf{k}_h = -\mathbf{k}_e \) |
| Metal / insulator | odd count per cell: metal; even: insulator unless bands overlap |
| Mass action | \( np = n_i^2 = N_cN_ve^{-E_g/k_BT} \) |
| Intrinsic level | mid-gap \( + \tfrac34k_BT\ln(m_h/m_e) \) |
| Donor | \( 13.6(m^*/m)/\varepsilon_r^2 \) eV; radius \( 0.053\varepsilon_r/(m^*/m) \) nm |
| Gap from data | slope of \( \ln\sigma \) vs \( 1/T \) \( = -E_g/2k_B \) |
Key Takeaways
What’s Next
- Superconductivity, Josephson Junctions and Superfluidity: what happens when electrons near \( E_F \) pair up and a gap opens at the Fermi surface itself.
- Semiconductor Devices: Junctions and Transistors, which builds devices on the carrier statistics above.
- Optoelectronic Devices: Solar Cells, Photodetectors and LEDs, where direct and indirect gaps matter.
- Condensed Matter Physics: Quick Revision.