Skip to content

Bravais and Reciprocal Lattices, Diffraction and the Structure Factor

CSIR NET Part C condensed matter: Bravais lattices, reciprocal lattice, Brillouin zones, Bragg and Laue conditions, structure factor and extinction rules.

  • 22 min read
  • Updated
On this page · 13 sections
  1. Prerequisites
  2. The Hook: A Grating You Cannot Rule
  3. Lattice, Basis and Crystal Structure
  4. The Reciprocal Lattice
  5. Diffraction: Bragg and Laue
  6. The Structure Factor
  7. Memory Tricks
  8. Don’t Confuse
  9. Common Mistakes
  10. Practice
  11. Quick Revision Table
  12. Key Takeaways
  13. What’s Next

Prerequisites

The Hook: A Grating You Cannot Rule

Lattice, Basis and Crystal Structure

A Bravais lattice is an infinite array of points that looks identical from every point:

$$\mathbf{R} = n_1\mathbf{a}_1 + n_2\mathbf{a}_2 + n_3\mathbf{a}_3, \qquad n_i \in \mathbb{Z}$$

where \( \mathbf{a}_1, \mathbf{a}_2, \mathbf{a}_3 \) are primitive vectors, not all in one plane. A crystal structure is a lattice plus a basis: a group of atoms attached identically to every lattice point.

$$\text{crystal structure} = \text{Bravais lattice} + \text{basis}$$
  • A primitive cell contains exactly one lattice point; its volume is \( V_c = |\mathbf{a}_1\cdot(\mathbf{a}_2\times\mathbf{a}_3)| \). Primitive cells are not unique, but they all have the same volume.
  • The Wigner–Seitz cell is the primitive cell with full lattice symmetry: the region closer to one lattice point than to any other, built from perpendicular bisector planes to neighbours.
  • A conventional cell is a larger cell chosen to show the symmetry (the cube of bcc or fcc). It contains several lattice points.

Counting the Bravais lattices

In two dimensions there are 5 Bravais lattices: oblique, rectangular, centred rectangular, square, hexagonal. In three dimensions there are 14, grouped into 7 crystal systems.

Crystal systemCell constraintsBravais latticesCount
Triclinic\( a \neq b \neq c \); \( \alpha \neq \beta \neq \gamma \)P1
Monoclinic\( a \neq b \neq c \); \( \alpha = \gamma = 90^\circ \neq \beta \)P, C2
Orthorhombic\( a \neq b \neq c \); all angles \( 90^\circ \)P, C, I, F4
Tetragonal\( a = b \neq c \); all \( 90^\circ \)P, I2
Trigonal (rhombohedral)\( a = b = c \); \( \alpha = \beta = \gamma \neq 90^\circ \)R1
Hexagonal\( a = b \neq c \); \( \alpha = \beta = 90^\circ \), \( \gamma = 120^\circ \)P1
Cubic\( a = b = c \); all \( 90^\circ \)P, I, F3

(P primitive, I body-centred, F face-centred, C one pair of faces centred, R rhombohedral.) There is no “base-centred tetragonal” or “face-centred tetragonal”: each is equivalent to a smaller tetragonal P or I cell. That kind of statement is a favourite Part C option.

The cubic lattices and two common structures

Lattice / structurePoints per conventional cellNearest neighboursNN distancePacking fraction
Simple cubic (sc)16\( a \)\( \pi/6 \approx 0.524 \)
Body-centred cubic (bcc)28\( \sqrt3a/2 \)\( \sqrt3\pi/8 \approx 0.680 \)
Face-centred cubic (fcc)412\( a/\sqrt2 \)\( \pi/(3\sqrt2) \approx 0.740 \)
Diamond (fcc + 2-atom basis)8 atoms4\( \sqrt3a/4 \)\( \sqrt3\pi/16 \approx 0.340 \)
Ideal hcp (hexagonal + 2-atom basis)6 atoms per hexagonal prism12\( a \)0.740, with \( c/a = \sqrt{8/3} \approx 1.633 \)

Primitive vectors worth knowing by heart (conventional cube edge \( a \)):

  • bcc: \( \tfrac{a}{2}(-1, 1, 1) \), \( \tfrac{a}{2}(1, -1, 1) \), \( \tfrac{a}{2}(1, 1, -1) \); \( V_c = a^3/2 \).
  • fcc: \( \tfrac{a}{2}(0, 1, 1) \), \( \tfrac{a}{2}(1, 0, 1) \), \( \tfrac{a}{2}(1, 1, 0) \); \( V_c = a^3/4 \).

The Wigner–Seitz cell of bcc is a truncated octahedron; that of fcc is a rhombic dodecahedron. Remember these: they reappear as Brillouin zones, swapped.

Miller indices and plane spacing

A family of lattice planes with intercepts \( a/h \), \( b/k \), \( c/l \) on the axes is labelled \( (hkl) \), with \( h, k, l \) coprime for the true lattice planes. For a cubic cell

$$\boxed{d_{hkl} = \frac{a}{\sqrt{h^2 + k^2 + l^2}}}$$

For tetragonal, \( 1/d^2 = (h^2 + k^2)/a^2 + l^2/c^2 \); for orthorhombic, \( 1/d^2 = h^2/a^2 + k^2/b^2 + l^2/c^2 \). For hexagonal, \( 1/d^2 = \tfrac{4}{3}(h^2 + hk + k^2)/a^2 + l^2/c^2 \).

The Reciprocal Lattice

Definition

Given primitive vectors \( \mathbf{a}_i \), define

$$\boxed{\mathbf{b}_1 = 2\pi\frac{\mathbf{a}_2\times\mathbf{a}_3}{\mathbf{a}_1\cdot(\mathbf{a}_2\times\mathbf{a}_3)}, \quad \mathbf{b}_2 = 2\pi\frac{\mathbf{a}_3\times\mathbf{a}_1}{V_c}, \quad \mathbf{b}_3 = 2\pi\frac{\mathbf{a}_1\times\mathbf{a}_2}{V_c}}$$

so that \( \mathbf{a}_i\cdot\mathbf{b}_j = 2\pi\delta_{ij} \). The reciprocal lattice is the set \( \mathbf{G} = m_1\mathbf{b}_1 + m_2\mathbf{b}_2 + m_3\mathbf{b}_3 \). The defining property is

$$e^{i\mathbf{G}\cdot\mathbf{R}} = 1 \quad \text{for every direct lattice vector } \mathbf{R}$$

so the \( \mathbf{G} \) are exactly the wavevectors of plane waves with the periodicity of the lattice. Any lattice-periodic function (electron density, crystal potential) can be expanded as \( n(\mathbf{r}) = \sum_\mathbf{G} n_\mathbf{G}e^{i\mathbf{G}\cdot\mathbf{r}} \). Many texts in crystallography drop the \( 2\pi \); CSIR NET options usually keep it. Check the option set before computing.

Properties to use without derivation

PropertyStatement
Reciprocal of reciprocalthe direct lattice
Volume\( V_c^* = (2\pi)^3/V_c \)
Planes\( \mathbf{G}_{hkl} = h\mathbf{b}_1 + k\mathbf{b}_2 + l\mathbf{b}_3 \) is perpendicular to the planes \( (hkl) \)
Spacing\( d_{hkl} = 2\pi/\vert \mathbf{G}_{hkl}\vert \) for the shortest \( \mathbf{G} \) in that direction
sc, edge \( a \)sc, edge \( 2\pi/a \)
bcc, cube \( a \)fcc, cube edge \( 4\pi/a \)
fcc, cube \( a \)bcc, cube edge \( 4\pi/a \)
Simple hexagonal \( (a, c) \)simple hexagonal \( (4\pi/\sqrt3a, 2\pi/c) \), rotated by \( 30^\circ \) about \( c \)
2D square, side \( a \)square, side \( 2\pi/a \)
2D rectangular \( a\times b \)rectangular \( 2\pi/a\times2\pi/b \): the long side becomes short

Brillouin zones

The first Brillouin zone is the Wigner–Seitz cell of the reciprocal lattice: all \( \mathbf{k} \) closer to \( \mathbf{G} = 0 \) than to any other reciprocal lattice point. Its boundaries are the planes that bisect each \( \mathbf{G} \) perpendicularly, i.e. the \( \mathbf{k} \) satisfying \( 2\mathbf{k}\cdot\mathbf{G} = G^2 \). That is the diffraction condition below, which is why electron and phonon waves are Bragg reflected at zone boundaries (pages 2 and 4).

Direct latticeFirst Brillouin zone
sc (edge \( a \))cube of edge \( 2\pi/a \)
bccrhombic dodecahedron (Wigner–Seitz cell of fcc)
fcctruncated octahedron (Wigner–Seitz cell of bcc)
1D chain, spacing \( a \)\( -\pi/a < k \leq \pi/a \)
2D squaresquare of side \( 2\pi/a \)
2D hexagonalhexagon

The zone always has volume \( (2\pi)^3/V_c \) and contains exactly \( N \) allowed \( \mathbf{k} \) values for a crystal of \( N \) primitive cells with periodic boundary conditions. That count is the root of “each band holds \( 2N \) electrons” and “3 phonon branches per atom in the basis”.

Diffraction: Bragg and Laue

Bragg’s law

Treat lattice planes as partial mirrors. Waves reflected from successive planes \( d \) apart reinforce when the path difference is a whole number of wavelengths:

$$\boxed{2d\sin\theta = n\lambda}$$

with \( \theta \) the glancing angle (from the plane, not the normal) and the detector at \( 2\theta \) from the incident beam. Diffraction needs \( \lambda \leq 2d \), which is why X-rays (about 0.1 nm), thermal neutrons and electrons of a few hundred volts are used and visible light is not. The \( n \)-th order reflection from \( (hkl) \) is written as the first-order reflection from \( (nh\,nk\,nl) \), with spacing \( d/n \); that is why indices like (200) and (222) appear.

The Laue condition

Elastic scattering from incident wavevector \( \mathbf{k} \) to \( \mathbf{k}' \) (\( |\mathbf{k}'| = |\mathbf{k}| \)) adds amplitudes from all lattice points with phases \( e^{-i\Delta\mathbf{k}\cdot\mathbf{R}} \). They all add in phase only if

$$\boxed{\Delta\mathbf{k} = \mathbf{k}' - \mathbf{k} = \mathbf{G}}$$

for some reciprocal lattice vector. Squaring \( \mathbf{k}' = \mathbf{k} + \mathbf{G} \) with \( k' = k \) gives \( 2\mathbf{k}\cdot\mathbf{G} + G^2 = 0 \); with \( |\mathbf{G}| = 2\pi n/d \) and \( |\Delta\mathbf{k}| = 2k\sin\theta \) this is Bragg’s law. The two pictures are the same statement.

Ewald construction. Draw \( \mathbf{k} \) ending at the reciprocal lattice origin and a sphere of radius \( k = 2\pi/\lambda \) centred at its start. Every reciprocal lattice point on the sphere gives a diffracted beam. A monochromatic beam on a fixed single crystal usually hits no point, so experiments rotate the crystal, use many orientations (powder or Debye–Scherrer method), or use a range of wavelengths (Laue method, white X-rays).

Probes and their wavelengths

ProbeWavelengthScatters fromNotes
X-rays\( \lambda(\text{nm}) = 1.240/E(\text{keV}) \); Cu \( K\alpha \approx 0.1541 \) nmelectron densityform factor rises with \( Z \), falls with \( \sin\theta/\lambda \)
Electrons\( \lambda = h/\sqrt{2meV} \approx 1.226/\sqrt{V} \) nm (non-relativistic)electrostatic potentialstrong scattering, surface sensitive
Neutrons\( \lambda = h/\sqrt{2m_nE} \); about 0.18 nm at 25 meVnuclei and magnetic momentssees light atoms (H), isotopes and magnetic order; inelastic scans measure phonons

The Structure Factor

Lattice sum times basis sum

For a crystal with a basis of atoms \( j \) at positions \( \mathbf{r}_j \) in the cell, the amplitude scattered at \( \Delta\mathbf{k} = \mathbf{G} \) is \( N \) times the structure factor

$$\boxed{S_\mathbf{G} = \sum_j f_j(\mathbf{G})\,e^{-i\mathbf{G}\cdot\mathbf{r}_j}}$$

and the intensity is \( I \propto |S_\mathbf{G}|^2 \). The atomic form factor \( f_j \) is the Fourier transform of the atom’s electron density; at \( \mathbf{G} = 0 \) it equals the number of electrons. With \( \mathbf{r}_j = x_j\mathbf{a}_1 + y_j\mathbf{a}_2 + z_j\mathbf{a}_3 \) and \( \mathbf{G} = h\mathbf{b}_1 + k\mathbf{b}_2 + l\mathbf{b}_3 \),

$$S_{hkl} = \sum_j f_j\,e^{-2\pi i(hx_j + ky_j + lz_j)}$$

The trick for cubic crystals: describe bcc and fcc with the conventional cube (simple cubic lattice) plus a basis. The lattice then allows every \( (hkl) \), and the basis sum removes the ones that the true, smaller lattice does not have.

Extinction rules for the cubic structures

Structure (conventional cubic cell)Basis positions\( S_{hkl} \)Reflections present
sc(0,0,0)\( f \)all
bcc(0,0,0), \( (\tfrac12,\tfrac12,\tfrac12) \)\( f[1 + (-1)^{h+k+l}] \)\( h + k + l \) even
fcc(0,0,0), \( (0,\tfrac12,\tfrac12) \), \( (\tfrac12,0,\tfrac12) \), \( (\tfrac12,\tfrac12,0) \)\( 4f \) or 0\( h, k, l \) all even or all odd (unmixed)
Diamondfcc + \( (\tfrac14,\tfrac14,\tfrac14) \) shift\( S_{\text{fcc}}[1 + i^{-(h+k+l)}] \)unmixed, and if all even then \( h + k + l = 4n \)
NaClNa at fcc sites, Cl shifted by \( (\tfrac12,0,0) \)\( 4(f_{\text{Na}} + f_{\text{Cl}}) \) all even; \( 4(f_{\text{Na}} - f_{\text{Cl}}) \) all oddunmixed; odd lines weak
CsClCs (0,0,0), Cl \( (\tfrac12,\tfrac12,\tfrac12) \)\( f_{\text{Cs}} + f_{\text{Cl}} \) (\( h+k+l \) even), \( f_{\text{Cs}} - f_{\text{Cl}} \) (odd)all, odd ones weak

Two consequences Part C likes:

  • If the two ions have nearly equal form factors (KCl: K\( ^+ \) and Cl\( ^- \) are isoelectronic), the odd NaCl-type lines nearly vanish and the pattern looks like simple cubic with edge \( a/2 \).
  • If the two atoms in a CsCl-type cell were identical, the odd lines would vanish and the pattern would be bcc. That is the signature of an order–disorder transition in an alloy such as \( \beta \)-brass: superlattice lines appear on ordering.

Hcp. With atoms at \( (0,0,0) \) and \( (\tfrac13,\tfrac23,\tfrac12) \) in hexagonal axes, \( |S|^2 = 4f^2\cos^2[\pi(\tfrac{h + 2k}{3} + \tfrac{l}{2})] \). It vanishes when \( h + 2k = 3n \) and \( l \) is odd, e.g. (001), (003), (111).

Allowed values of \( h^2 + k^2 + l^2 \)

For a cubic powder, \( \sin^2\theta = \dfrac{\lambda^2}{4a^2}(h^2 + k^2 + l^2) \). Divide every \( \sin^2\theta \) by the first and look at the pattern:

LatticeAllowed \( N = h^2 + k^2 + l^2 \) (first lines)Ratios to first line
sc1, 2, 3, 4, 5, 6, 8, 9, … (7 never occurs)1 : 2 : 3 : 4 : 5 : 6 : 8
bcc2, 4, 6, 8, 10, 12, 14, 161 : 2 : 3 : 4 : 5 : 6 : 7 : 8
fcc3, 4, 8, 11, 12, 16, 19, 201 : 1.33 : 2.67 : 3.67 : 4
Diamond3, 8, 11, 16, 19, 241 : 2.67 : 3.67 : 5.33

The sc and bcc sequences of ratios look alike except that sc can never give 7 (no integer sum of three squares equals 7), while bcc gives 7 as \( N = 14 \) divided by 2. Two close lines followed by a gap (3, 4 then 8) is the fcc fingerprint.

What else changes the intensities

  • Form factor: falls as \( \sin\theta/\lambda \) grows, so high-angle lines are weaker.
  • Multiplicity: the number of equivalent planes in a powder, e.g. 8 for {111}, 6 for {100}, 12 for {110} in a cubic crystal.
  • Thermal vibrations: the Debye–Waller factor \( e^{-\langle(\mathbf{G}\cdot\mathbf{u})^2\rangle} \) weakens lines (more at high \( G \) and high \( T \)) but does not broaden them; the lost intensity goes into a diffuse background.
  • Finite crystallite size: broadens lines (Scherrer: width \( \propto 1/(L\cos\theta) \)).

Memory Tricks

  • “Body and Face swap in k-space.” bcc ↔ fcc under the reciprocal map; their Wigner–Seitz cells swap too (truncated octahedron ↔ rhombic dodecahedron).
  • bcc: “even sum”; fcc: “all same parity”; diamond: “fcc, and even ones need a sum divisible by 4”.
  • fcc powder fingerprint: “3, 4, gap, 8, 11, 12”. bcc: “2, 4, 6, 8, … no gaps”.
  • Lattices 5 and 14; systems 7. Cubic gets 3 (P, I, F), orthorhombic gets all 4 (P, C, I, F).
  • “Long goes short.” A long direct-lattice vector gives a short reciprocal vector.

Don’t Confuse

ThisvsThat
Bravais lattice: identical surroundings at every pointCrystal structure: lattice + basis (diamond, hcp, NaCl)
CsCl: simple cubic + 2-atom basisbcc: one atom type at corner and centre
Primitive cell: one lattice pointConventional cell: 2 (bcc), 4 (fcc) lattice points
Bragg angle \( \theta \): from the planeScattering angle \( 2\theta \): between beams
Lattice decides where peaks can be (\( \Delta\mathbf{k} = \mathbf{G} \))Basis decides how strong (\( \vert S_\mathbf{G}\vert ^2 \))
Debye–Waller: reduces peak intensity, peaks stay sharpSmall crystallites: broaden peaks
First Brillouin zone: Wigner–Seitz cell in \( k \)-spaceWigner–Seitz cell: in real space

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper. Use \( h = 6.626\times10^{-34} \) J s, \( m_e = 9.109\times10^{-31} \) kg, \( e = 1.602\times10^{-19} \) C.

Level 1: Foundation

  1. How many Bravais lattices are there in two dimensions, and in three?
  2. What is the reciprocal lattice of a bcc lattice with conventional cube edge \( a \)?
  3. Which reflection, (110) or (111), is absent for a bcc metal?
Answers
  1. 5 in 2D, 14 in 3D.
  2. fcc with conventional cube edge \( 4\pi/a \).
  3. (111): \( h + k + l = 3 \) is odd. (110) has an even sum and is the first bcc line.

Level 2: Part B Style

Practice Q1. A two-dimensional rectangular lattice has primitive vectors \( a\hat x \) and \( 2a\hat y \). Its reciprocal lattice is rectangular with primitive vectors:

(a) \( (2\pi/a)\hat x \) and \( (4\pi/a)\hat y \) (b) \( (2\pi/a)\hat x \) and \( (\pi/a)\hat y \) (c) \( (\pi/a)\hat x \) and \( (2\pi/a)\hat y \) (d) \( a\hat x/2\pi \) and \( a\hat y/\pi \)

Answer: (b)

For orthogonal axes \( b_i = 2\pi/a_i \): \( 2\pi/a \) along \( x \), \( 2\pi/2a = \pi/a \) along \( y \). The long direct axis becomes the short reciprocal axis. (a) multiplies instead of dividing; (d) drops the \( 2\pi \) and inverts the dimensions incorrectly.

Practice Q2. Electrons accelerated through 150 V are diffracted by a crystal. Their de Broglie wavelength is closest to:

(a) 0.010 nm (b) 0.050 nm (c) 0.10 nm (d) 0.32 nm

Answer: (c) 0.10 nm

\( \lambda = h/\sqrt{2m_eeV} = 6.626\times10^{-34}/\sqrt{2\times9.109\times10^{-31}\times1.602\times10^{-19}\times150} = 1.00\times10^{-10} \) m. Shortcut: \( 1.226/\sqrt{150} = 0.100 \) nm. Comparable to interatomic spacings, which is why low-energy electron diffraction works.

Practice Q3. In an NaCl-type crystal the form factors of the two ions are in the ratio \( f_A : f_B = 3 : 1 \) at the relevant angles. Ignoring all angle-dependent factors and multiplicities, the intensity ratio \( I(200)/I(111) \) is:

(a) 1 (b) 2 (c) 4 (d) 16

Answer: (c) 4

All-even: \( S = 4(f_A + f_B) = 16 \) (in units of \( f_B \)); all-odd: \( S = 4(f_A - f_B) = 8 \). Ratio of intensities \( (16/8)^2 = 4 \). (b) is the amplitude ratio; (d) is the fourth power.

Practice Q4. For an ideal hcp crystal, which reflection is forbidden by the structure factor?

(a) (100) (b) (002) (c) (101) (d) (001)

Answer: (d) (001)

\( S \propto 1 + e^{2\pi i[(h + 2k)/3 + l/2]} \). For (001): \( h + 2k = 0 \), \( l = 1 \), phase \( \pi \), so \( S = 0 \). For (002) the phase is \( 2\pi \), \( S = 2f \). For (100) and (101) the phase is \( 2\pi/3 \) or \( 2\pi/3 + \pi \), giving \( |S| = f \) or \( \sqrt3 f \), weaker but non-zero.

Level 3: Part C Style

Practice Q5. A cubic metal is examined with radiation of wavelength 0.15406 nm. The first five powder lines have \( \sin^2\theta = 0.1070, 0.1427, 0.2854, 0.3925, 0.4282 \). Consider:

  1. The lattice is face-centred cubic.
  2. The first line is the (111) reflection.
  3. The cubic cell edge is about 0.408 nm.
  4. The nearest-neighbour distance is about 0.353 nm.

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only

Divide by 0.1070: 1, 1.334, 2.667, 3.668, 4.002. Multiply by 3: 3, 4, 8, 11, 12. That is the fcc sequence, so (1) and (2) are true.

\( a = \dfrac{\lambda}{2}\sqrt{\dfrac{N}{\sin^2\theta}} = \dfrac{0.15406}{2}\sqrt{\dfrac{3}{0.1070}} = 0.4079 \) nm; using the fourth line (\( N = 11 \)) gives 0.4078 nm. (3) true.

The fcc nearest-neighbour distance is \( a/\sqrt2 = 0.288 \) nm. The value 0.353 nm is \( \sqrt3a/2 \), the bcc result. (4) false.

Practice Q6. An ordered AB alloy has the CsCl structure: A at (0,0,0) and B at \( (\tfrac12,\tfrac12,\tfrac12) \) of a cube of edge \( a \). Above a transition temperature the sites are occupied at random, so each site holds an “average atom” with form factor \( \tfrac12(f_A + f_B) \). Consider:

  1. In the ordered phase, the (100) reflection has amplitude proportional to \( f_A - f_B \).
  2. In the disordered phase, the (100) reflection disappears.
  3. In the disordered phase the lattice is bcc with cube edge \( a \), so the (110) line is present.
  4. The (110) amplitude is proportional to \( f_A + f_B \) in both phases.

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 3 and 4 only (d) 1, 2, 3 and 4

Answer: (d) 1, 2, 3 and 4

\( S_{hkl} = f_A + f_Be^{-i\pi(h + k + l)} \).

  1. (100): \( h + k + l = 1 \), \( S = f_A - f_B \). True.
  2. Disordered: \( S = \bar f[1 + (-1)^{h+k+l}] \), zero for odd sums. True; these are the superlattice lines that vanish on disordering.
  3. Identical (average) atoms at corner and centre form a bcc lattice; (110) has an even sum and is present. True.
  4. Even sum: ordered \( f_A + f_B \); disordered \( 2\bar f = f_A + f_B \). True.

Practice Q7. A two-dimensional hexagonal lattice has primitive vectors \( \mathbf{a}_1 = a\hat x \) and \( \mathbf{a}_2 = a(\tfrac12\hat x + \tfrac{\sqrt3}{2}\hat y) \). Consider:

  1. The reciprocal lattice is also hexagonal.
  2. The shortest reciprocal lattice vectors have length \( 4\pi/(\sqrt3a) \).
  3. The first Brillouin zone is a square of side \( 2\pi/a \).
  4. The area of the first Brillouin zone is \( 8\pi^2/(\sqrt3a^2) \).

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2 and 3 only (d) 1, 3 and 4 only

Answer: (b) 1, 2 and 4 only

In 2D use \( \mathbf{b}_i\cdot\mathbf{a}_j = 2\pi\delta_{ij} \): \( \mathbf{b}_1 = \tfrac{2\pi}{a}(1, -\tfrac{1}{\sqrt3}) \), \( \mathbf{b}_2 = \tfrac{2\pi}{a}(0, \tfrac{2}{\sqrt3}) \). Both have length \( 4\pi/(\sqrt3a) \approx 7.26/a \) and the angle between them is \( 120^\circ \): a hexagonal lattice rotated by \( 30^\circ \). (1), (2) true.

The first zone is a hexagon, so (3) is false. Its area is \( (2\pi)^2/A_c \) with \( A_c = \sqrt3a^2/2 \): \( 8\pi^2/(\sqrt3a^2) \). (4) true.

Quick Revision Table

IdeaFormula or fact
Bravais lattices5 in 2D, 14 in 3D, 7 crystal systems
Packing fractionssc 0.524, bcc 0.680, fcc and hcp 0.740, diamond 0.340
Coordinationsc 6, bcc 8, fcc 12, diamond 4
Cubic spacing\( d = a/\sqrt{h^2 + k^2 + l^2} \)
Reciprocal vectors\( \mathbf{b}_1 = 2\pi(\mathbf{a}_2\times\mathbf{a}_3)/V_c \); \( \mathbf{a}_i\cdot\mathbf{b}_j = 2\pi\delta_{ij} \)
Reciprocal pairssc ↔ sc (\( 2\pi/a \)); bcc ↔ fcc (\( 4\pi/a \))
Spacing from \( \mathbf{G} \)\( d_{hkl} = 2\pi/\vert \mathbf{G}_{hkl}\vert \)
Diffraction\( 2d\sin\theta = n\lambda \) ⇔ \( \Delta\mathbf{k} = \mathbf{G} \)
Structure factor\( S = \sum_jf_je^{-2\pi i(hx_j + ky_j + lz_j)} \)
bcc / fcc / diamondeven sum / unmixed / unmixed and even sums \( = 4n \)
Electron wavelength\( 1.226/\sqrt{V} \) nm

Key Takeaways

What’s Next