Skip to content

Partial Differential Equations: Laplace, Wave and Heat

CSIR NET Physical Sciences: classifying PDEs, separation of variables in Cartesian, polar, cylindrical and spherical coordinates, drums, plates, cooling.

  • 23 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: Why a Drum Does Not Sound Like a Violin
  3. The Three Equations and Their Types
  4. Separation of Variables: the Recipe
  5. Laplace’s Equation
  6. The Wave Equation
  7. The Heat (Diffusion) Equation
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: Why a Drum Does Not Sound Like a Violin

The Three Equations and Their Types

EquationFormTypePhysicsData needed
Laplace / Poisson\( \nabla^2u = 0 \) / \( \nabla^2u = -f \)ellipticelectrostatics, steady heat flow, ideal fluid flow\( u \) or \( \partial_nu \) on the whole closed boundary
Heat (diffusion)\( \partial_tu = D\nabla^2u \)parabolicconduction, diffusioninitial \( u \) plus boundary values
Wave\( \partial_t^2u = c^2\nabla^2u \)hyperbolicstrings, membranes, sound, lightinitial \( u \) and \( \partial_tu \) plus boundary values

Classification

For \( Au_{xx} + 2Bu_{xy} + Cu_{yy} + (\text{lower-order terms}) = 0 \), compute the discriminant:

$$\boxed{B^2 - AC\ \begin{cases}< 0 & \text{elliptic}\\ = 0 & \text{parabolic}\\ > 0 & \text{hyperbolic}\end{cases}}$$

The coefficients may depend on position, so the type can change from region to region. For \( yu_{xx} + u_{yy} = 0 \): \( A = y \), \( B = 0 \), \( C = 1 \), so \( B^2 - AC = -y \): elliptic for \( y > 0 \), hyperbolic for \( y < 0 \), parabolic on \( y = 0 \).

The type controls the physics. Elliptic equations have no characteristics: a change of boundary data anywhere is felt everywhere inside at once, and solutions are as smooth as possible. Hyperbolic equations carry signals along characteristics at finite speed \( c \), and they preserve kinks. Parabolic equations smooth instantly but with an “arrow of time”: you cannot run diffusion backwards stably.

Separation of Variables: the Recipe

  1. Write \( u \) as a product of one-variable functions, \( u = X(x)Y(y)T(t) \).
  2. Divide by \( u \); each term then depends on one variable, so each equals a constant (the separation constant).
  3. Solve the resulting ODEs. The homogeneous boundary conditions turn one of them into an eigenvalue problem that fixes the separation constants.
  4. Superpose all allowed products. Fix the coefficients from the remaining (inhomogeneous) boundary condition or the initial condition, using orthogonality.

The coordinate system must match the boundary: Cartesian for boxes, polar or cylindrical for discs and cylinders, spherical for spheres. Which special function appears is decided by the coordinate system:

CoordinatesLaplacian separates intoRadial / angular functions
Cartesian\( X'' = -k_x^2X \), etc.\( \sin \), \( \cos \), \( \sinh \), \( \cosh \), \( e^{\pm kx} \)
Plane polar \( (r, \theta) \)\( \Theta'' = -n^2\Theta \)\( r^{\pm n} \) (and \( 1 \), \( \ln r \) for \( n = 0 \))
Cylindrical \( (\rho, \phi, z) \)\( \Phi'' = -m^2\Phi \), \( Z'' = k^2Z \)Bessel \( J_m(k\rho) \), \( Y_m(k\rho) \); modified \( I_m \), \( K_m \) if \( Z'' = -k^2Z \)
Spherical \( (r, \theta, \phi) \)\( Y_l^m(\theta, \phi) \)\( r^l \), \( r^{-(l+1)} \) (Laplace); spherical Bessel \( j_l(kr) \) (Helmholtz)
graph TD
    A["PDE: Laplace, wave or heat"] --> B{"Shape of the boundary?"}
    B -->|"box or rectangle"| C["Cartesian: sines, cosines, sinh"]
    B -->|"disc or cylinder"| D["Cylindrical: Bessel J_m, cos m phi"]
    B -->|"sphere"| E["Spherical: Legendre P_l or Y_lm, powers of r"]
    C --> F{"Time dependence?"}
    D --> F
    E --> F
    F -->|"none"| G["Laplace: match boundary values"]
    F -->|"first derivative"| H["Heat: each mode decays as exp(-D k^2 t)"]
    F -->|"second derivative"| I["Wave: each mode oscillates at omega = c k"]

The time dependence always separates the same way. Put \( u = \psi(\mathbf r)T(t) \): both the heat and wave equations reduce to the Helmholtz equation \( \nabla^2\psi = -k^2\psi \) for the spatial part, with

$$\text{heat: } T = e^{-Dk^2t}, \qquad \text{wave: } T = \cos(ckt),\ \sin(ckt).$$

So once you know the spatial eigenvalues \( k^2 \) for a region, you know both the vibration frequencies \( \omega = ck \) and the decay rates \( Dk^2 \). A small region has large \( k \): it rings at high pitch and cools fast.

Laplace’s Equation

Properties worth more than any calculation

  • Mean value property. The value of a harmonic function at a point equals its average over any circle (2D) or sphere (3D) centred there that lies inside the region.
  • Maximum principle. A non-constant harmonic function has no maximum or minimum inside the region: extremes lie on the boundary. (Earnshaw’s theorem, that no static arrangement of charges can trap a test charge in stable equilibrium, follows from this.)
  • Uniqueness. For Dirichlet data the solution is unique. For Neumann data it is unique up to an additive constant, and the data must satisfy \( \oint\partial_nu\,dS = \int\nabla^2u\,dV \) (zero for Laplace).

Rectangle

Take \( 0 < x < a \), \( 0 < y < b \), with \( u = 0 \) on three sides and \( u(x, b) = f(x) \). The conditions at \( x = 0, a \) select \( \sin(n\pi x/a) \); the condition at \( y = 0 \) selects \( \sinh(n\pi y/a) \):

$$u(x, y) = \sum_{n = 1}^\infty B_n\sin\frac{n\pi x}{a}\,\frac{\sinh(n\pi y/a)}{\sinh(n\pi b/a)}, \qquad B_n = \frac{2}{a}\int_0^af(x)\sin\frac{n\pi x}{a}\,dx.$$

For \( f = V_0 \), \( B_n = 4V_0/n\pi \) for odd \( n \), zero for even \( n \).

Disc (plane polar coordinates)

The general solution of \( \nabla^2u = 0 \) in polar coordinates is

$$u(r, \theta) = A_0 + B_0\ln r + \sum_{n = 1}^\infty\left(A_nr^n + B_nr^{-n}\right)\left(C_n\cos n\theta + D_n\sin n\theta\right).$$

Inside a disc of radius \( R \), drop \( \ln r \) and \( r^{-n} \) (they blow up at the centre). Outside, drop \( r^n \) (it blows up at infinity), keeping \( \ln r \) only if there is net “charge”. The value at the centre is \( A_0 \), the average of the boundary data, which is the mean-value property again.

Sphere with azimuthal symmetry

With no \( \phi \)-dependence,

$$\boxed{u(r, \theta) = \sum_{l = 0}^\infty\left(A_lr^l + \frac{B_l}{r^{l + 1}}\right)P_l(\cos\theta)}$$

Expand the boundary data in Legendre polynomials (\( P_0 = 1 \), \( P_1 = \cos\theta \), \( P_2 = \tfrac{1}{2}(3\cos^2\theta - 1) \)), then attach \( (r/R)^l \) inside and \( (R/r)^{l+1} \) outside.

Surface potential \( V(R, \theta) \)Inside \( (r < R) \)Outside \( (r > R) \)
\( V_0 \)\( V_0 \)\( V_0R/r \)
\( V_0\cos\theta \)\( V_0(r/R)\cos\theta \) (uniform field)\( V_0(R/r)^2\cos\theta \) (pure dipole)
\( V_0\cos^2\theta = V_0\left[\tfrac{1}{3} + \tfrac{2}{3}P_2\right] \)\( V_0\left[\tfrac{1}{3} + \tfrac{2}{3}(r/R)^2P_2\right] \)\( V_0\left[\tfrac{1}{3}\tfrac{R}{r} + \tfrac{2}{3}(R/r)^3P_2\right] \)

The surface charge follows from the jump in the radial field: \( \sigma = -\epsilon_0\left(\partial_ru_{\text{out}} - \partial_ru_{\text{in}}\right)_{r = R} \). Only the \( l = 0 \) term contributes net charge: \( Q = 4\pi\epsilon_0RA_0^{\text{(surface)}} \), where \( A_0^{\text{(surface)}} \) is the average of the surface potential.

Conducting sphere in a uniform field \( E_0\hat z \) (grounded, radius \( R \)): \( u \to -E_0r\cos\theta \) far away and \( u = 0 \) on the sphere, so

$$u = -E_0\left(r - \frac{R^3}{r^2}\right)\cos\theta, \qquad \sigma = 3\epsilon_0E_0\cos\theta.$$

The induced dipole moment is \( p = 4\pi\epsilon_0R^3E_0 \). For a dielectric sphere (relative permittivity \( \epsilon_r \)) the same \( l = 1 \) matching gives a uniform interior field \( E_{\text{in}} = \frac{3}{\epsilon_r + 2}E_0 \).

Cylinder

For a cylinder of radius \( a \) and height \( h \) with zero potential on the curved side and the bottom, the curved side forces \( J_0(k\rho) \) to vanish at \( \rho = a \): \( k = j_{0n}/a \), with \( j_{0n} \) the zeros of \( J_0 \). The \( z \)-dependence is then \( \sinh(kz) \). If instead the potential depends on \( z \) like \( \sin(k z) \) (oscillating along the axis), the radial functions are the modified Bessel functions \( I_0(k\rho) \), which grow monotonically and have no zeros.

The Wave Equation

Strings and d’Alembert

In 1D the general solution is \( u = F(x - ct) + G(x + ct) \). With initial displacement \( f(x) \) and velocity \( g(x) \) on an infinite string,

$$\boxed{u(x, t) = \frac{f(x - ct) + f(x + ct)}{2} + \frac{1}{2c}\int_{x - ct}^{x + ct}g(s)\,ds}$$

A string fixed at \( x = 0, L \) has modes \( \sin(n\pi x/L)\cos(\omega_nt) \) with \( \omega_n = n\pi c/L \): harmonic overtones.

Rectangular membrane and box

A membrane \( a\times b \) fixed at its edge has modes \( \sin\frac{m\pi x}{a}\sin\frac{n\pi y}{b} \) with

$$\omega_{mn} = c\pi\sqrt{\frac{m^2}{a^2} + \frac{n^2}{b^2}}, \qquad m, n = 1, 2, \ldots$$

For a square (\( a = b \)), \( \omega_{mn} \propto\sqrt{m^2 + n^2} \), and the symmetry \( m \leftrightarrow n \) makes most modes doubly degenerate:

\( m^2 + n^2 \)Modes \( (m, n) \)\( \omega/\omega_{11} \)Degeneracy
2(1,1)11
5(1,2), (2,1)1.5812
8(2,2)21
10(1,3), (3,1)2.2362
13(2,3), (3,2)2.5502
50(1,7), (7,1), (5,5)53 (“accidental”)

The same counting in 3D gives the modes of a cubical cavity, \( \omega \propto\sqrt{n_x^2 + n_y^2 + n_z^2} \), which is the counting behind black-body radiation and the particle in a cube (for an electromagnetic cavity one index may be zero, and each wave vector carries two polarisations).

Circular membrane

A drum of radius \( a \): separate in polar coordinates, \( u = J_m(k r)\cos(m\theta)\cos(\omega t) \). The fixed rim requires \( J_m(ka) = 0 \), so

$$\boxed{\omega_{mn} = \frac{c\,j_{mn}}{a}}, \qquad j_{mn} = n\text{th zero of }J_m.$$
Mode \( (m, n) \)\( j_{mn} \)\( \omega/\omega_{01} \)Nodal lines
(0,1)2.4051none (rim only)
(1,1)3.8321.593one diameter
(2,1)5.1362.136two diameters
(0,2)5.5202.295one circle, at \( r = (2.405/5.520)a \approx 0.436a \)
(3,1)6.3802.653three diameters

\( m \) counts nodal diameters, \( n - 1 \) counts interior nodal circles. Modes with \( m \geq 1 \) are doubly degenerate (\( \cos m\theta \) and \( \sin m\theta \)).

Waves in 3D

Spherically symmetric solutions of the 3D wave equation are \( u = \frac{F(r - ct) + G(r + ct)}{r} \): substitute \( u = v/r \) and \( v \) obeys the 1D wave equation. The \( 1/r \) amplitude keeps the energy flux through a sphere constant. In 3D (and in higher odd dimensions) a sharp pulse stays sharp (Huygens’ principle holds); in 2D it leaves a trailing wake.

The Heat (Diffusion) Equation

Rod with fixed end temperatures

\( u_t = Du_{xx} \) on \( 0 < x < L \), \( u(0, t) = u(L, t) = 0 \), \( u(x, 0) = f(x) \):

$$\boxed{u(x, t) = \sum_{n = 1}^\infty B_n\sin\frac{n\pi x}{L}\,e^{-n^2\pi^2Dt/L^2}}, \qquad B_n = \frac{2}{L}\int_0^Lf(x)\sin\frac{n\pi x}{L}\,dx.$$
  • Mode \( n \) decays with time constant \( \tau_n = \frac{L^2}{n^2\pi^2D} \). Higher modes die \( n^2 \) times faster, so after a short time only the \( n = 1 \) mode survives. This is why diffusion smooths.
  • If the ends are held at fixed but non-zero temperatures \( T_1 \), \( T_2 \), first subtract the steady state \( T_1 + (T_2 - T_1)x/L \) (a solution of Laplace’s equation), then solve for the decaying remainder with zero end values.
  • Insulated ends (\( u_x = 0 \)): the modes are \( \cos(n\pi x/L) \) including \( n = 0 \). The \( n = 0 \) term never decays: the final temperature is the initial average, as energy conservation requires.

Plates, spheres and the free-space kernel

  • Rectangular plate with edges at zero: modes \( \sin\frac{m\pi x}{a}\sin\frac{n\pi y}{b} \) decay as \( \exp\left[-D\pi^2\left(\frac{m^2}{a^2} + \frac{n^2}{b^2}\right)t\right] \). Same eigenvalues as the membrane: \( \omega^2/c^2 \) there is \( \text{rate}/D \) here.
  • Sphere of radius \( R \) with surface at zero, radially symmetric start: put \( u = v(r, t)/r \), then \( v \) obeys the 1D heat equation with \( v(0) = v(R) = 0 \). Modes \( \frac{1}{r}\sin\frac{n\pi r}{R} \), decay times \( \frac{R^2}{n^2\pi^2D} \).
  • Infinite medium: a point release spreads as the Gaussian kernel \( (4\pi Dt)^{-d/2}e^{-r^2/4Dt} \) in \( d \) dimensions, with mean square displacement
$$\boxed{\langle r^2\rangle = 2dDt}$$

(\( 2Dt \) in 1D, \( 4Dt \) in 2D, \( 6Dt \) in 3D). Distance diffused grows as \( \sqrt t \): this square-root law is the signature of every diffusion question. A random walker with step \( \ell \) every \( \tau \) has \( D = \ell^2/2\tau \) in 1D.

Memory Tricks

Don’t Confuse

ThisvsThat
Laplace inside a sphere: \( r^l \)Outside: \( r^{-(l+1)} \)
Fixed-end rod: sine modes, everything decays to 0Insulated rod: cosine modes, decays to the initial average
String overtones: integer multiplesDrum overtones: Bessel-zero ratios, not integers
\( J_m \) (oscillating; Helmholtz, membranes)\( I_m \) (growing, no zeros; Laplace with oscillating \( z \)-dependence)
Heat mode decay rate \( \propto n^2 \)Wave mode frequency \( \propto n \)
Dirichlet Laplace: uniqueNeumann Laplace: unique up to a constant, needs zero net flux
Hyperbolic: finite signal speed, kinks propagateParabolic: infinite speed, instant smoothing

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Classify \( u_{xx} - u_{yy} = 0 \).
  2. A harmonic function in the unit disc takes the boundary values \( 3 + \sin5\theta \). What is its value at the centre?
  3. In a rod with fixed-temperature ends, how much faster does the \( n = 2 \) mode decay than the \( n = 1 \) mode?
Answers
  1. Hyperbolic (\( A = 1 \), \( B = 0 \), \( C = -1 \); \( B^2 - AC = 1 > 0 \)). It is the 1D wave equation with \( c = 1 \).
  2. 3, the boundary average (the \( \sin5\theta \) term averages to zero).
  3. 4 times (rate \( \propto n^2 \)).

Level 2: Part B Style

Practice Q1. The equation \( y\,u_{xx} + u_{yy} = 0 \) is:

(a) elliptic everywhere (b) elliptic for \( y > 0 \), hyperbolic for \( y < 0 \) (c) hyperbolic for \( y > 0 \), elliptic for \( y < 0 \) (d) parabolic everywhere

Answer: (b)

\( A = y \), \( B = 0 \), \( C = 1 \): \( B^2 - AC = -y \). Negative (elliptic) for \( y > 0 \), positive (hyperbolic) for \( y < 0 \), zero on the line \( y = 0 \). This is the Tricomi equation, used for flow near the speed of sound. Option (c) reverses the sign of the discriminant.

Practice Q2. The fundamental mode of a uniform circular drumhead fixed at its rim is 100 Hz. The next higher mode has frequency closest to:

(a) 200 Hz (b) 159 Hz (c) 230 Hz (d) 141 Hz

Answer: (b) 159 Hz

\( f \propto j_{mn} \). Fundamental \( j_{01} = 2.405 \); next is \( j_{11} = 3.832 \). Ratio \( 3.832/2.405 = 1.593 \), so about 159 Hz. (a) assumes string-like harmonics; (c) is the \( (0,2) \) mode, which comes after \( (1,1) \) and \( (2,1) \); (d) is a \( \sqrt2 \) ratio, which belongs to neither the drum nor a square membrane (whose first overtone ratio is \( \sqrt{5/2} = 1.58 \)).

Practice Q3. A square region has one side held at 12 V and the other three sides grounded. With no charge inside, the potential at the centre is:

(a) 6 V (b) 4 V (c) 3 V (d) 0 V

Answer: (c) 3 V

Four rotated copies add up to all sides at 12 V, whose solution is 12 V everywhere. By symmetry each contributes equally at the centre: \( 12/4 = 3 \) V.

Practice Q4. A dye molecule diffuses in three dimensions with \( D = 5\times10^{-10} \) m²/s. Its root-mean-square displacement after 100 s is about:

(a) 0.22 mm (b) 0.45 mm (c) 0.55 mm (d) 0.32 mm

Answer: (c) 0.55 mm

\( \langle r^2\rangle = 6Dt = 6\times5\times10^{-10}\times100 = 3.0\times10^{-7} \) m², so \( r_{\text{rms}} = 5.48\times10^{-4} \) m \( \approx 0.55 \) mm. (d) uses \( 2Dt \), the 1D value (\( \sqrt{10^{-7}} \) m \( = 0.32 \) mm); (b) uses \( 4Dt \), the 2D value; (a) uses \( Dt \) alone.

Level 3: Part C Style

Practice Q5. A thin spherical shell of radius \( R \) carries a surface charge arranged so that its potential on the surface is \( V(R, \theta) = V_0\cos^2\theta \). There are no other charges. Consider:

  1. The potential at the centre is \( V_0/3 \).
  2. Far from the shell, the potential has a monopole and a quadrupole term but no dipole term.
  3. The total charge on the shell is \( \frac{4}{3}\pi\epsilon_0RV_0 \).
  4. Inside the shell, the electric field on the \( z \) axis is zero.

Which are correct?

(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (a) 1, 2 and 3 only

\( \cos^2\theta = \tfrac{1}{3} + \tfrac{2}{3}P_2(\cos\theta) \).

Inside: \( u = V_0\left[\tfrac{1}{3} + \tfrac{2}{3}\left(\tfrac{r}{R}\right)^2P_2\right] \). At \( r = 0 \), \( u = V_0/3 \). Statement 1 true.

Outside: \( u = V_0\left[\tfrac{1}{3}\tfrac{R}{r} + \tfrac{2}{3}\left(\tfrac{R}{r}\right)^3P_2\right] \): \( l = 0 \) and \( l = 2 \) only. Statement 2 true.

Monopole: \( \frac{Q}{4\pi\epsilon_0r} = \frac{V_0R}{3r} \Rightarrow Q = \frac{4\pi\epsilon_0RV_0}{3} \). Statement 3 true.

On the axis inside, \( P_2 = 1 \) and \( u = \frac{V_0}{3} + \frac{2V_0z^2}{3R^2} \), so \( E_z = -\frac{4V_0z}{3R^2} \), non-zero except at the centre. Statement 4 false.

Practice Q6. A rod of length 1 m with thermal diffusivity \( D = 1.0\times10^{-4} \) m²/s is at uniform excess temperature \( T_0 \); at \( t = 0 \) both ends are clamped at zero excess temperature. Consider:

  1. The coefficient of the slowest mode is \( 4T_0/\pi \).
  2. The time constant of the slowest mode is about \( 1.0\times10^3 \) s.
  3. The even-\( n \) modes are present with coefficients \( 2T_0/n\pi \).
  4. The slowest overtone present decays 9 times faster than the fundamental.

Which are correct?

(a) 1, 2 and 3 only (b) 1, 2 and 4 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 4 only

\( B_n = 2\int_0^1T_0\sin n\pi x\,dx = \frac{2T_0}{n\pi}(1 - \cos n\pi) \): \( \frac{4T_0}{n\pi} \) for odd \( n \), 0 for even \( n \). Statement 1 true, statement 3 false.

\( \tau_1 = L^2/(\pi^2D) = 1/(9.87\times10^{-4}) = 1013 \) s. Statement 2 true.

The first overtone present is \( n = 3 \), with rate \( 3^2 = 9 \) times the fundamental. Statement 4 true.

Practice Q7. A circular membrane of radius \( a \) is fixed at its rim. Consider:

  1. The \( (0,2) \) mode has an interior nodal circle at \( r = a/2 \).
  2. The lowest overtone has frequency about 1.59 times the fundamental.
  3. The overtones are integer multiples of the fundamental.
  4. The \( (1,1) \) mode has one nodal diameter and is doubly degenerate.

Which are correct?

(a) 2 and 4 only (b) 1, 2 and 4 only (c) 2, 3 and 4 only (d) 1 and 3 only

Answer: (a) 2 and 4 only
  1. The \( (0,2) \) mode is \( J_0(j_{02}r/a) \), whose interior zero is where \( j_{02}r/a = j_{01} \): \( r = (2.405/5.520)a = 0.436a \), not \( a/2 \). False.
  2. \( j_{11}/j_{01} = 3.832/2.405 = 1.593 \). True.
  3. Bessel zeros are not in integer ratios. False.
  4. \( J_1(kr)\cos\theta \) vanishes on the diameter \( \theta = \pi/2 \); the partner \( J_1(kr)\sin\theta \) has the same frequency. True.

Quick Revision Table

IdeaFormula or fact
Classification\( B^2 - AC \): \( < 0 \) elliptic, \( = 0 \) parabolic, \( > 0 \) hyperbolic
Separation in timeheat \( e^{-Dk^2t} \); wave \( \cos ckt \); space obeys \( \nabla^2\psi = -k^2\psi \)
Mean valuecentre value = boundary average (disc, sphere)
Square, one side \( V_0 \)centre \( V_0/4 \)
Disc\( A_0 + \sum(A_nr^n + B_nr^{-n})(\cos n\theta, \sin n\theta) \)
Sphere (axial)\( \sum(A_lr^l + B_lr^{-(l+1)})P_l(\cos\theta) \)
Sphere in field\( -E_0(r - R^3/r^2)\cos\theta \), \( \sigma = 3\epsilon_0E_0\cos\theta \)
String\( \omega_n = n\pi c/L \)
Rectangular membrane\( \omega_{mn} = c\pi\sqrt{m^2/a^2 + n^2/b^2} \)
Circular membrane\( \omega_{mn} = cj_{mn}/a \); 2.405, 3.832, 5.136, 5.520
Rod, fixed ends\( \sin(n\pi x/L)e^{-n^2\pi^2Dt/L^2} \), \( \tau_1 = L^2/\pi^2D \)
Rod, insulated endscosines; final value = initial average
Diffusion\( \langle r^2\rangle = 2dDt \)
d’Alembert\( \tfrac{1}{2}[f(x - ct) + f(x + ct)] + \tfrac{1}{2c}\int g \)

Key Takeaways

What’s Next